Pulsar SF124 Bedienungsanleitung

SF124

v1.0

SF124 24-ports switch for 24 IP cameras

Edition: 1 from 06.06.2018

Supercedes the edition: -----------

Features:

Switch 24 ports

24 PoE ports 10/100Mb/s (data transfer

and power supply)

2 ports 10/100/1000 Mb/s (G1/TP, G2/TP ports) (UpLink)

2 ports 10/100/1000Mb/s SFP (G1/SFP, G2/SFP ports)

(UpLink)

30W for each PoE port, supports devices complaint with

the IEEE802.3af/at (PoE+) standard

Supports auto-learning and auto-aging of MAC addresses

(16K size)

LED indication

Additional assembly elements

warranty –2 year from the production date

Example of use.

1. Technical description.

1.1.General description.

SF124 is a 24-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.

Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 –8 ports of the switch. The G1/TP

and G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots

(marked as G1/SFP and G2/SFP), the use of fiber optic module (GBIC) allows fiber optic transmission.The operating status of

the device (described in the table below) is displayed on the LED display on the front panel.

The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a

separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access

point or router.

1.2. Block diagram.

Fig. 1. Block diagram.

1.3. Description of components and connectors.

Table 1. (see Fig. 2, 3 and 4)

Element no.

(Fig. 2)

Description

[1]

LED indication

[2]

24 x PoE port (1÷24)

[3]

2 x UPLINK ports (G1/TP, G2/TP)

[4]

2 x UPLINK ports (G1/SFP, G2/SFP)

[5]

Power Socket of the AC

[6]

Additional mounting elements

Fig. 2. The front power of the switch.

Fig. 3. Rear panel of the switch.

Fig. 4. The view switch'a.

1.4.Technical parameters

Table 2.

Ports

24 x PoE (10/100Mb/s) (RJ-45)

2 x UpLink (10/100/1000Mb/s) (RJ-45)

2 x UpLink (10/100/1000Mb/s) (SFP)

with connection speed auto-negotiation and MDI/MDIX Auto Cross)

PoE power supply

IEEE 802.3af/at (1÷24 ports), 52VDC / 30W at each port *

Used pairs 4/5 (+), 7/8 (-)

Protocols, Standards

IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP

Bandwidth

14,8Gbps

Transmission method

Store-and-Forward

Optical indication of

operation

Switch power supply

Link

PoE Status

Power supply

90 ÷ 264VAC 50/60Hz / 1,3A / 230VAC

Operating conditions

temperature -10°C ÷ 40°C,

relative humidity 5% - 90%, no condensation

Dimensions

W=442, H=44, D=224 [+/- 2mm]

Additional equipment

bracket for Rack 19”

Cable length AC

1,2m

Net/gross weight

3,0 / 3,5kg

Protection class

EN 60950-1:2007

I (first)

Storage temperatur

-20°C ÷ 60°C

Declarations

*The given value of 30W per port is the maximum value. The total power consumption should not exceed 240W when all PoE ports are being used.

2. Installation.

2.1. Requirements.

The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal

relative humidity (RH=90% maximum, without condensation) and temperature from -10°C to +40°C. Ensure the free flow

of air around the unit. The PSU shall work in a vertical position that guarantees sufficient convectional air-flow through

ventilating holes of the enclosure.

The switch load balance should be done before installation. The given value of 30W per port is the maximum

value referring to a single output. The total power consumption should not exceed 240W when all PoE ports are being

used. The increased demand for power is particularly evident in the case of cameras with heaters or infrared illuminators -

when launching these features, the power consumption increases rapidly, which may adversely affect the operation of the

switch. As the device is designed for a continuous operation and is not equipped with a power-switch, therefore an appropriate

overload protection in the power supply circuit should be provided. The electrical system shall be made in accordance with

applicable standards and regulations.

2.2. Installation procedure.

1. Connect the 230V AC power supply and turn on the device. The connection should be made with the supplied 3-core

cable with a plug. The place and method of installation of the switch should ensure free air flow around the unit.

2. Connect the camera wires to the RJ45 connectors (sockets RJ45 from 1 to 24).

3. Connect the remaining LAN devices to RJ45 connectors or SFP socket (G1/TP and G1/SFP or G2/TP and G2/SFP)

CAUTION! G1/TP and G1/SFP or G2/TP and G2/SFP connectors can not operate simultaneously!

4. Check the optical indication of switch operation (see Table 3).

Connection schemes

3. Operation indication (see table 3)

Table 3. Operation indication

OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY

GREEN LED LIGHT (Power)

Indication of the switch's power

supply

OFF –no power supply of the switch

ON –power supply on, normal operation

OPTICAL INDICATION AT THE PoE PORTS (1÷24)

GREEN LED LIGHT (PoE)

Indication of the PoE power supply

at the RJ45 ports

OFF- no power supply at the RJ45 port (the device is not connected or not compliant with

the IEEE802.3af standard)

ON –supply

Blinking –short-circuit or output overload

YELLOW LED LIGHT (LINK)

The connection status of LAN

devices, 10MB/s or 100Mb/s

and data transmission

OFF- no connection

ON - the device is connected; 10Mb/s or 100Mb/s

Blinking –data transmission

OPTICAL INDICATION AT THE UPLINK PORTS (G1/TP, G2/TP, G1/SFP, G2/SFP)

YELLOW LED

LIGHT (LINK)

No light (OFF) - no connection

ON - device is connected

Blinking –data transmission

CAUTION! The operating status of the G1/TP, G1/SFP, G2/TP and G2/SFP slots is

shown on the LEDs located near the RJ45 connector (see below).

CAUTION! G1/TP and G1/SFP or G2/TP and G2/SFP sockets can not operate

simultaneously.

These are COMBO type sockets.

GREEN LED

LIGHT

(SPEED)

OFF –connection 10Mb/s or 100Mb/s

ON - connection 1000Mb/s

CAUTION! The operating status of the G1/TP, G1/SFP, G2/TP and G2/SFP slots is

shown on the LEDs located near the RJ45 connector (see below).

CAUTION! G1/TP and G1/SFP or G2/TP and G2/SFP sockets can not operate

simultaneously.

These are COMBO type sockets.

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to the European Union WEEE Directive, waste electrical and electronic equipment

should be disposed of separately from normal household waste.

Pulsar

Siedlec 150, 32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50

e-mail: biuro@pulsar.pl, sales@pulsar.pl

http:// www.pulsar.pl, www.zasilacze.pl

Inhaltsverzeichnis

Andere Pulsar Schalten Handbücher

Pulsar

Pulsar S64-B Bedienungsanleitung

Pulsar

Pulsar RS98 Bedienungsanleitung

Pulsar

Pulsar S54-C Bedienungsanleitung

Pulsar

Pulsar PSB-24V5A Bedienungsanleitung

Pulsar

Pulsar ISFG42 Bedienungsanleitung

Pulsar

Pulsar DSB98 Bedienungsanleitung

Pulsar

Pulsar S64-B17 Bedienungsanleitung

Pulsar

Pulsar HADOC 8012C Bedienungsanleitung

Pulsar

Pulsar S64H Bedienungsanleitung

Pulsar

Pulsar S98-BR Bedienungsanleitung

Pulsar

Pulsar S64 Bedienungsanleitung

Pulsar

Pulsar PSB-24V3A Bedienungsanleitung

Pulsar

Pulsar PSB1002435 Bedienungsanleitung

Pulsar

Pulsar ISF108 Bedienungsanleitung

Pulsar

Pulsar S98-CR Bedienungsanleitung

Pulsar

Pulsar SWB-60 Bedienungsanleitung

Pulsar

Pulsar SF116-B Bedienungsanleitung

Pulsar

Pulsar PSBSOF 10A12 Bedienungsanleitung

Pulsar

Pulsar PSB-12V15A Bedienungsanleitung

Pulsar

Pulsar S108 Bedienungsanleitung

Pulsar

Pulsar S108-BR Bedienungsanleitung

Pulsar

Pulsar S64-CRB Bedienungsanleitung

Pulsar

Pulsar S108-B Bedienungsanleitung

Pulsar

Pulsar S54-B17 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch