Pulsar W650 Bedienungsanleitung

PULSAR LC DIGITAL QUARTZ

Cal. W650

CHARACTERISTICS

1. Time/calendar display:

•Hour, minutes, seconds, month, date and day of the week.

•Fully automatic calendar: Calendar adjusts automatically

for odd and even months including February of leap years

from the year 1995 up to the end of 2044.

•Time indication: Changeover between 12- and 24-hour

indications is possible.

2. Stopwatch: Measures up to 10 hours with 1⁄100-second

readout.

•8 lap memory: Up to 8 lap times can be stored in memory.

3. Countdown timer:

•Preset timer: Four different lengths of time (3, 5, 10 and

15 minutes) have been preset for the timer.

•Adjustable timer: Up to 9 hours and 59 minutes can be set

in minutes.

•Auto repeat function: After the set time is up, the timer

counts down the set time again as many times as necessary.

4. Daily alarm: The alarm can be set to ring on a 24-hour basis.

At a designated time, the display is illuminated as the alarm

rings.

•Hourly time signal: Can be set to ring every hour on the

hour with a single beep.

5. Illuminating light: The light evenly illuminates the display

in the dark.

Auto illumination function

•If it is turned on in the time/calendar setting display, the

display is illuminated with each depression of a button to

operate the watch.

•While the stopwatch or timer is counting, the display is

illuminated every minute to signal the lapse of time by

turning on the auto illumination function. In the stopwatch

function, it is activated for the first 19 minutes. In the

adjustable timer function, it is activated for the last 19

minutes of the countdown.

TIME

LIGHT

BUTTONS AND DISPLAYS

Hourly time

signal mark

Alarm mark

Date

Month

“A”(AM)/

“P”(PM) mark

Display mark

Auto illumination

mark

Day

SecondsMinutes

Graphic display

Light button

Hour

Mode selector A D

* If the confirmation sound is turned on, it beeps when the

display is changed by depressing mode selector “A”.

* A flashing display mark indicates that the corresponding function

is in use.

Mode Selection

With each depression of mode selector “A”, the selection of the

display can be made in the following order.

Time/calendar

display

Stopwatch

display

➡

Timer

display

Alarm

display

➡

TIME

HOW TO SET THE TIME/CALENDAR AND AUTO ILLUMINATION

Month

Date

Auto illumination

mark

Day

“A”(AM)/

“P”(PM) mark Seconds

Hourly time signal mark

Hour Minutes

1. Depress mode selector “A” to show the time/calendar display.

2. Depress button “B” for 2 to 3 seconds to show the time/

calendar setting display. “EL-AUTO” is displayed together

with flashing “on” mark.

3. Selection of the digits to be adjusted (flashing) is made in the

following order by depressing button “C”.

Time/calendar

display mark

Hour

12- or 24-hour indication

←

Year

←

Month

←

Auto illumination*

(EL-AUTO on/off)

→

Seconds

→

Minutes

→

↑↓

Date

* For details, refer to “Auto Illumination Function” below.

4. Depress button “D” to set the flashing digits. One digit is

advanced with each depression of the button. Digits except

seconds move quickly by keeping button “D” depressed.

5. After all the adjustments are completed, depress button “B” to

return to the time/calendar display.

Auto Illumination Function

With each depression of button “D” in the time/calendar

setting display, the “EL-AUTO on” and “EL-AUTO off” marks

appear alternately. When the “EL-AUTO on” mark is displayed,

the auto illumination function is turned on. When the “EL-

AUTO off” mark is displayed, it is turned off.

When it is turned on:

1. The display is illuminated with each depression of a button

to operate the watch.

2. While the stopwatch or timer is counting, the display is

illuminated every minute to signal the lapse of time. In the

stopwatch function, the auto illumination function is activated

for the first 19 minutes. In the adjustable timer function,

it is activated for the last 19 minutes of the countdown.

Notes:

1. When setting the hour digits in the 12-hour indication, check

that “A”(AM)/“P”(PM) mark is set properly. In the 24-hour

indication, there is no indication.

2. Once the year, month and date have been set, the day of the

week is set automatically.

3. If the watch is left untouched in the time/calendar setting

display with the digits flashing, it will automatically return to

the time/calendar display in 2 to 3 minutes.

Seconds setting

Depress button “D” in accordance with a time signal. The seconds

are reset to “00” and start immediately.

When the seconds count any number from “30” to “59” and button

“D” is depressed, one minute is added and the seconds are reset

to “00”.

HOW TO USE THE STOPWATCH

•The stopwatch can measure up to 9 hours, 59 minutes, 59

seconds and 99 in 1⁄100 seconds.

•By turning on the button operation confirmation sound, a beep

sounds every minute to signal the lapse of time.

•By turning on the auto illumination function, the display is

illuminated every minute to signal the lapse of time for the

first 19 minutes.

* Even if the stopwatch display is changed to another while the

measurement is in progress, it continues counting properly.

After the stopwatch is used, however, be sure to reset it as

the battery energy is consumed enormously to shorten the

battery life.

* While the stopwatch is measuring, the graphic display turns

on and off repeatedly.

Depress mode selector “A” to show the stopwatch display.

CHRONO

Current time

Auto illumination

mark

Hourly time signal mark

1/100 seconds

Hour

Minutes Seconds

Stopwatch display mark

Stopwatch Operation

Accumulated elapsed time measurement

Start

←

Stop

CHRONO

←

CHRONO

Restart

CHRONO

←

Stop C

CHRONO

←

Reset

←

CHRONO

** Accumulate repeatedly by depressing button “C”.

Andere Handbücher für W650

Andere Pulsar Betrachten Handbücher

Pulsar

Pulsar V071 Bedienungsanleitung

Pulsar

Pulsar Y182 Bedienungsanleitung

Pulsar

Pulsar 5Y67 Bedienungsanleitung

Pulsar

Pulsar V071, V072 Bedienungsanleitung

Pulsar

Pulsar VD31 Bedienungsanleitung

Pulsar

Pulsar YM22 Bedienungsanleitung

Pulsar

Pulsar W621 Bedienungsanleitung

Pulsar

Pulsar W540 Bedienungsanleitung

Pulsar

Pulsar VD84 Bedienungsanleitung

Pulsar

Pulsar W850 Bedienungsanleitung

Pulsar

Pulsar 7T62 Bedienungsanleitung

Pulsar

Pulsar AS01 Bedienungsanleitung

Pulsar

Pulsar W170 Bedienungsanleitung

Pulsar

Pulsar W860 Bedienungsanleitung

Pulsar

Pulsar W854 Bedienungsanleitung

Pulsar

Pulsar VD51 Bedienungsanleitung

Pulsar

Pulsar V041 Bedienungsanleitung

Pulsar

Pulsar NX15 Bedienungsanleitung

Pulsar

Pulsar W510 Bedienungsanleitung

Pulsar

Pulsar VX82 Bedienungsanleitung

Pulsar

Pulsar 7T92 Bedienungsanleitung

Pulsar

Pulsar W650 Bedienungsanleitung

Pulsar

Pulsar W855 Bedienungsanleitung

Pulsar

Pulsar P1 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung