Pure Digital SONUS-1 SONUS-1XT Bedienungsanleitung
2
Controls and Connectors
Tune
6 7
9 10
8
InfoiVOX
Standby Sleep
Menu
Front panel
Rear panel
3
1. iVOX – press and repeat to toggle speech on or off, or hold to switch full speech on.
2. Standby - press to switch between standby mode and power on.
3. Sleep - press and repeat to set your radio to enter standby in 15, 30, 45, 60 or 90 minutes.
4. Info - press and repeat to change the display mode between scrolling text, clock, day and date,
programme type, multiplex name, channel, mode and signal quality. Hold down to hear scrolling
text spelled out.
5. Menu - press to access the setup menu, turn the Tune knob to scroll through and push to select
an option. You can also press Menu to exit menus and menu options.
6. Presets (1-5) - press and hold for around two seconds to store a station under that number.
Press and release to select and listen to a preset.
Press up arrow ( ) first to access presets 6-10.
7. Tune - turn to scroll through and press to select radio stations and menu options. Press to hear
current station name and see signal strength.
8. Vol – turn to adjust the volume.
9. SnoozeHandle™ - tap to hear and see the time, set the alarm to snooze or illuminate the clock
in standby. Tap twice to hear alarm settings. Hold in standby to display clock with full brightness.
1 0. USB - connect to a PC for software upgrades.
11. Digital Out - optical S/PDIF - connect to an external amplifier or recorder.
12. Stereo Out - analogue output - connect to an external amplifier or recorder.
13. Headphone - connect to headphones.
14. Aux Speaker - connect to the optional XT-1 speaker for full stereo output.
15. 9V DC - connect to mains adapter.
4
Quick start
This section provides information on how to set up and start using your radio.
1 Fully extend the aerial, connect the mains adapter and plug in to your power
supply.
2 Push the Standby button to switch the unit on.
The LCD lights up, the radio says ‘Welcome to the PURE SONUS-1XT with iVOX.
Autotune in progress, please wait’ and a progress bar indicates the progress
of a full autotune to find the stations available. When finished the number of
stations found is announced, the station names are placed in a station list and
you hear the first station.
3 Adjust the volume control if required.
4 Turn the Tune knob to browse the station list. When you stop the station name
will be announced. Push Tune to select and listen to another station.
5 Push the Info button and repeat to cycle through the optional display modes
including the full screen clock.
5
Using your SONUS-1XT
iVOX - Making your radio speak
iVOX brings a new level of accessibility to your radio providing speech
assistance to help you navigate menus, select stations, hear scrolling text and
even check the time and alarm settings.
You can switch speech on or off at any time by pressing the iVOX button or
customise using the iVOX menu options.
Setting the speech mode
1. Press the Menu button, turn the Tune knob and push to select iVOX.
2. Select Speech mode. You see and hear the currently selected speech mode
3. Press Tune and turn and push again to select one of the following options:
Full speech All speech on, including menu options.
This is the default option.
Time only Time only, tap the SnoozeHandle to hear the time.
Stations only Station names only, scroll station list or select station
to hear.
Time/stations Time and station names only.
Speech disabled All speech off.
iVOX
Speech mode
Full speech
6
Spelling unknown stations
By default, if your radio encounters a station for which it has no speech stored it
will announce its name as ‘Unknown’, if preferred you can set your radio to spell
out the name of new or unknown stations by setting this option ‘On’.
1. Press the Menu button, turn the Tune knob and push to select iVOX.
2. Select Spell unknown. You see and hear the current state.
3. Press Tune and turn and push again to switch the option on or off.
Spelling scrolling text
You can set your radio to spell out the scrolling text broadcast by most DAB
stations.
1. Hold the Info button down for around three seconds. You hear a beep and
the scrolling text being spelled out and see a cursor on screen showing the
position within the text. You hear another beep when the text end is reached.
2. Turn the Tune knob to pause the speech and step forward (clockwise) or
back (anti-clockwise) within the text if required and press Tune to start the
text scrolling again.
3. Press the Tune knob while text is scrolling to stop the scrolling and return to
the start of the text.
4. Press the Info or Menu button to exit and switch off scrolling text speech.
iVOX
Spell unknown
Off
net Rock - The
Planet Rock
7
Setting alarms
SONUS-1XT has two alarms which switch the radio on (if in standby) and tune
to a station or sound a tone. You can set alarms when your radio is on or in
standby as follows:
1. Press the Menu button and push the Tune knob to select the Alarm settings
option.
2. Turn the Tune knob to view and hear current Alarm 1 or Alarm 2 settings and
push if you want to change that alarm.
3. Turn the Tune knob to scroll through the following options, you see and hear
the current setting, push to change any of them. If you change a setting you
move to the next option on the list.
Set alarm Set the alarm on or off.
Set time Turn the Tune knob to set the hours, push the Tune knob, turn
and push to set the minutes.
Set days Choose between Daily, Weekday, Saturday, Sunday or Weekend.
Set mode Choose between a Radio (default) or Tone alarm. If you set a
radio alarm the volume will be whatever the volume control
is set at when the alarm goes off.
Select station Select the station you want your alarm to tune to. (If you
have selected Radio mode above.)
8
When finished, press the menu button or wait a moment and you’ll return to
your normal display mode. If your display mode is set to Clock you will see a bell
symbol on the screen and alarm time for each alarm that is set.
Note If you set a radio alarm and the station is not available when it is due to go
off a tone alarm will sound instead.
Changing the alarm snooze time
You can change the period that the alarm snoozes for when you touch the
SnoozeHandle™. The default is 8 minutes.
1. Press the Menu button, select Alarm settings and choose Snooze time. You
see the current snooze time at the top of the screen.
2. Turn the Tune knob to choose a snooze period between 5 and 59 minutes
and push to confirm the change. The snooze time set will apply to all alarms.
Cancelling alarms
When a radio or tone alarm goes off you have three options, Snooze, switch off
or switch on:
Snooze Tap the SnoozeHandle to snooze the alarm for the period set (the
default is 8 minutes). The radio or tone will mute and you see the
snooze icon on the screen. The alarm will repeat when the snooze
period has elapsed. You can repeat the snooze as many times as you
want up to 60 minutes after the last snooze.
8 minutes
9
The alarm will automatically turn off after 60 minutes. To cancel the snooze and
the alarm push the Tune button.
Switch off Press the Standby button to return to standby and cancel the
alarm.
Switch on If it is a tone alarm press the Tune button and the radio will switch
on. If it is a radio alarm, any button (other than Standby) will
operate as normal plus cancel the alarm.
Setting a sleep time
You can set a sleep time after which SONUS-1XT will switch itself into standby
mode, ideal if you want to fall asleep listening to the radio. You can also set a
Sleep time from standby which will switch the radio on first.
Press the Sleep button and repeat to choose between 15, 30, 45, 60 or 90
minutes or select Off to set no sleep time. If your display mode is set to Clock
you will see a SLEEP icon on the display.
Press the Sleep button again to view and hear the time remaining until
SONUS-1XT will switch off or to change the sleep time again.
Sleep 15 minutes
10
Recording from your SONUS-1XT
You can record from your SONUS-1XT using the Stereo Out or Digital Out sockets.
You can also set a record timer to automatically switch your unit on and tune to
a particular station at a time of your choosing – this may be useful if you have
a MiniDisc recorder or similar with a synchro-record facility and you use the
Digital Out socket. You cannot record one station and listen to another at the
same time. Note The volume level of the recording is at a set level and is not
dependant on the position of the volume knob.
Setting a record timer
The record timer function lets you set times at which your SONUS-1XT will
automatically switch itself on (if in standby mode) tune to a station for a
specified period then automatically switch itself off again. You can set up to nine
timers.
1. Press the Menu button and select the Record timer option.
2. Turn the Tune knob to view the nine timers and push to select and change
one.
3. Set the station, day, start time and duration you want and also whether you
want the speaker on or off. Push the Tune knob to select and turn to change
settings.
Inhaltsverzeichnis
Andere Pure Digital Radio Handbücher
Pure Digital
Pure Digital Evoke-2 Bedienungsanleitung
Pure Digital
Pure Digital Bug Keeping Bedienungsanleitung
Pure Digital
Pure Digital EVOKE-1 XT Bedienungsanleitung
Pure Digital
Pure Digital EVOKE Mio Bedienungsanleitung
Pure Digital
Pure Digital PocketDAB 1000 Bedienungsanleitung
Pure Digital
Pure Digital EVOKE-3 EVOKE-3 Bedienungsanleitung
Pure Digital
Pure Digital Elgar EVOKE-1 Bedienungsanleitung
Pure Digital
Pure Digital Elan RV40 Bedienungsanleitung
Pure Digital
Pure Digital Elan DX40 Bedienungsanleitung
Pure Digital
Pure Digital EVOKE 1XT Bedienungsanleitung
