PURE PureSteam XL Bedienungsanleitung

Standing Fabric Steamer

OPERATION MANUAL

READ BEFORE USING

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ……………..………………….......... 1-2

PRODUCT DIAGRAM.........................................………..……….…........…... 3

ASSEMBLING PURESTEAM XL ……………………………….…………….…... 4

USING PURESTEAM XL ……………………………….…………….….…....…... 5

PRESSING WITH STEAM.……………………………............…......…….6

QUICK STORAGE………………….………………...............……..... 7

CLEANING & LONG-TERM STORAGE………….........….............……...... 7-8

PROBLEM SOLVING GUIDE...........................................…………………… 9

REMOVING MINERAL BUILDUP….......................................................... 10-11

PRODUCT SPECIFICATIONS…................................................................. 11

WARRANTY & PRODUCT REGISTRATION......................…………………… 12

2 3

IMPORTANT SAFETY INSTRUCTIONS (Cont'd.)

15. DO NOT let the power cord touch hot surfaces or water. The power cord

should not be kinked or obstructed in any way.

16. DO NOT bend, twist or fold the steam hose.

17. DO NOT steam plastic, vinyl, leather or suede materials.

18. Always keep the steam nozzle elevated above the water container. Do

not lay the hose on the oor.

19. PureSteam XL has a grounded plug. As a safety feature, this plug will t

in a three-prong outlet only one way. If the plug does not t in the outlet,

do not attempt to bypass this safety feature.

20. DO NOT pull the power cord to disconnect it from an outlet. Instead,

grasp the plug to remove it from the outlet.

21. To reduce the risk of contact with hot water and steam, always check

PureSteam XL for steam leaks. Operate PureSteam XL with the steam

nozzle placed in its holder; and inspect the base, hose, handle, and

nozzle for steam leaks.

22. DO NOT operate another high-wattage appliance on the same circuit as

PureSteam XL. Doing so may cause a circuit overload,

23. If an extension cord is absolutely necessary, a 3-pronged cord rated for

at least 20 amperes should be used. Cords rated for less amperage may

overheat. Care should be taken to arrange the cord so that it cannot be

inadvertently pulled or tripped over.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

When using PureSteam XL you should always follow these basic safety

precautions:

1. Use PureSteam XL for its intended purpose only.

2. DO NOT submerge PureSteam XL in water or other liquids.

3. DO NOT allow PureSteam XL to be used as a toy.

4. Keep out of reach of children and always use close supervision when

steaming by or near children.

5. Unplug PureSteam XL from the electrical outlet before adding or

removing attachments and before lling, emptying or cleaning the water

tank.

6. STEAM CAN CAUSE SERIOUS BURNS. Keep your hands, skin, and

hair away from the steam nozzle openings while steaming.

7. DO NOT touch the steam hose while steaming. It gets hot and can burn

your skin.

8. DO NOT point steam nozzle in the direction of people, plants, or pets

while steaming.

9. NEVER attempt to steam clothes while you are wearing them.

10. DO NOT operate PureSteam XL if it is damaged in any way—especially

if the power cord or plug is damaged. Doing so may result in fire,

electrical shock, or injury.

11. DO NOT leave PureSteam XL unattended while plugged in or in

operation.

12. Allow PureSteam XL to cool before storing it.

13. DO NOT use accessories that are not made for PureSteam XL. Doing so

may cause re, electrical shock, or injury.

14. Always turn the power switch off before unplugging or plugging in

PureSteam XL.

1 2

4 5

ASSEMBLING PURESTEAM XL

1: Remove all contents in the box to ensure you

have all the pieces listed on Page 3.

2: Fully extend the Telescopic Pole, To do so, rst

open the clips and loosen the poles. Then, fully

extend the poles and close the clips to lock in

place (see Figure 2). Make sure the pole is locked

into place and cannot be pushed down.

NOTE: To ensure a steady ow of steam it is best

to fully extend the steam hose and telescopic pole

when operating PureSteam XL.

3: To attach the hanger/nozzle holder, align the

tabs in the holder with the grooves on the pole

and push down (see Figure 3).

4: Insert the bottom of the telescopic pole into the

pole insert base (see Figure 4) so that the nozzle

holder faces the rear of the steamer. Pointing

the nozzle holder towards the rear will ensure

the stability of the steamer when garments are

hanging from the hanger holder.

5: To attach the steam hose: Align the screw at the

bottom of the steam hose with the unit base, and

then turn the screw clockwise to tighten the hose

with unit (see Figure 5). Then, place the steam

nozzle on the nozzle holder.

CAUTION: To prevent steam from causing bodily

injury or damage to surfaces, always hang the

steam nozzle on the nozzle holder when not in

use. Do not lay the steam hose on the floor as

condensation may occur and cause unwanted

water droplets in the steam.

CAUTION: Pulling on the steam hose with

excessive force will damage it and may cause a

steam leak.

PRODUCT DIAGRAM

3 4

1: Steam Nozzle

2: Steam Handle

3: Hanger/Nozzle Holder

4: Steam Hose

5: Telescopic Pole

6: Pole Insert Base

7: Water Fill Tank

8: Power Switch

9: Wheel

10: Power Cord

11: Unit Base

12: On/Off Light

13: Steam Hose Base

PureSteam XL also

includes two attachments: a

Garment Hanger and Fabric

Brush (not shown).

6 7

PRESSING WITH STEAM

1. To steam a garment, secure it carefully using the included garment

hanger.

CAUTION: Be careful when handling garments on the hanger.

Pulling on the garment with too much force may cause the unit to tip.

CAUTION: Hot steam can cause serious burns.Use caution.

2. Grasp the steam handle and place the steam nozzle at the bottom of

the garment. Steam will rise along the inside and outside of the fabric,

removing wrinkles. Slowly slide the nozzle vertically, from the bottom to

the top of the garment.

NOTE: Do not allow kinks to form in the hose at any time.

3. Remove the steam nozzle from the garment, and smooth the fabric with

your free hand.

4. Repeat steps 2 and 3 as necessary until the fabric is wrinkle free.

5. When steaming horizontally keep the steam 4 inches from the fabric.

6. To remove wrinkles from towels, handkerchiefs and napkins, drape them

over a rod or towel rack and gently steam.

7. Heavier fabrics may require repeated steaming.

8. To remove stubborn wrinkles, steam both sides of the fabric.

9. The fabric brush may also be used to remove tough wrinkles.

USING PURESTEAM XL

1. Turn off PureSteam XL and unplug the power cord.

2. Remove the water tank. Turn it upside down and unscrew the cap.

3. Fill the water tank with cool water and replace the cap.

NOTE: To prolong the life of PureSteam XL, we recommend using

distilled or de-mineralized water.

4. Place the water tank on the water reservoir. You should hear water

owing into the water reservoir for a short time.

CAUTION: Do not let the steamer operate with a dry water tank. Doing

so will cause damage to the unit.

5. Plug PureSteam XL into a properly grounded three-pronged outlet.

6. Turn the power switch on. The steam will be ready in 45 seconds.

7. To steam your garments hold the handle of the steam nozzle upright at

all times. Tilting it downward, even for a few moments, can cause a leak

that can burn your skin.

8. When nished steaming, turn the power switch off.

5 6

8 9

QUICK STORAGE

1. Turn off the unit and unplug the power cord.

2. Wrap the steam hose around the telescopic pole one time. Do not fold or

bend the hose.

3. Hang the steam nozzle from the nozzle holder.

4. Loosen the top two sections of the telescopic pole and collapse to a

compact height.

5. Roll the unit to a convenient storage location.

CLEANING AND LONG-TERM STORAGE

For maximium performance, you should clean PureSteam XL weekly. Using

distilled or de-mineralized water will help prevent buildup and require less

frequent cleaning. Do the following to clean:

1. Turn the unit off and unplug the Power Cord.

2. Wait for the unit to cool completely (at least 30 minutes).

3. Remove the steam hose and the telescopic pole, and set them aside.

4. Carry the unit to a sink or tub.

5. Remove and drain the water tank. Rinse with fresh water and drain

completely.

6. Tilt upside down to facilitate removal of all water.

CLEANING AND LONG-TERM STORAGE (Cont'd)

7. Flush the unit by lling the water reservoir and the hose base with fresh

water and draining completely.

8. Place the water tank back on the water reservoir.

9. Reattach the telescopic pole and steam hose.

10. Follow steps 3-6 of the Quick Storage procedure on the previous page.

7 8

10 11

PROBLEM SOLVING GUIDE

PROBLEM CAUSE SOLUTION

The unit fails to steam. 1. Steamer is not

plugged in.

2. Water tank is

empty.

3. There may be

mineral buildup.

1. Plug into electrical

outlet.

2. Fill water tank

3. Follow procedure

on the next page

Water drips from nozzle Condensation in hose Extend the hose

vertically to allow water

to drain back into the

water reservoir.

Excessive gurgling of

hose and steam nozzle

Condensation in hose Some gurgling is a

natural effect of the

steaming process. For

excessive gurgling,

extend the hose vertically

to allow water to drain

back into the water

reservoir.

Steam is intermittent Mineral Buildup in the

unit

It is normal for the unit

to periodically stop

steaming for a few

seconds. If the steam

stays off for longer

periods, follow the

procedure on the next

page.

REMOVING MINERAL BUILDUP

One common problem with steamers is mineral buildup caused by the high

mineral content often found in tap water. Mineral residue inside of the internal

pipes and heater can cause intermittent steaming or, in some cases, no

steaming at all.

NOTE: To reduce or eliminate mineral buildup we recommend the use

of de-mineralized or distilled water in the unit.

The procedure below can be used to reduce mineral buildup. If you are

unable to use de-mineralized or distilled water, we recommend you follow this

procedure monthly.

1. Turn the unit off and unplug the power cord.

2. Remove the steam hose and telescopic pole from the unit.

3. Drain the water reservoir by following steps 1-7 of the Cleaning and

Long-Term Storage procedure on Page 7. Leave the water tank off the

unit.

4. Mix a solution of 50% vinegar and 50% water. In most cases, 2 cups of

this solution will be sufcient.

5. Slowly pour the water-vinegar solution into the hose base connector as

shown in Figure 6.

9 10

REMOVING MINERAL BUILDUP (Cont'd)

6. Continue pouring the solution into the hose base until the solution

appears near the top of the hose base. Pour additional solution into the

water reservoir until it is about half full.

7. Allow solution to sit for 40 minutes.

8. Drain the solution from the water reservoir allowing the liquid to drain into

a sink or tub.

9. Drain the solution out of the hose base by tilting the unit over a sink or

tub and pouring the water out of the hose base.

10. Pour clean water in the hose base and water reservoir inlet and drain.

11. Repeat this step until the vinegar smell dissipates.

12. Reassemble the unit and operate normally.

PRODUCT SPECIFICATIONS

Base Dimensions 14 in x 9.25 in x 12.2 in

Total Height 5 ft, 5 in

Weight 10 lbs, 9 oz

Water Tank Capacity 1/2 gal

Heat Up Time 45 seconds

Steam Time up to 60 minutes per tank rell

Steam Hose Length 5-ft cloth-covered hose

Input 120V AC 60Hz 1500w

Power Cord Length 7 ft

WARRANTY INFORMATION

Pure Enrichment offers an industry-leading 2 Year Warranty on PureSteam XL.

For warranty requests or questions please visit pureenrichment.com.

PRODUCT REGISTRATION

To ensure your 2 Year Warranty, receive product updates, and streamlined

customer support, please register your PureSteam XL at pureenrichment.com.

11 12

Santa Ana, CA 92704

www.pureenrichment.com

Inhaltsverzeichnis

Andere PURE Küchengerät Handbücher

PURE

PURE Nanosteamer Clinical Bedienungsanleitung

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung