Purism Librem 5 Bedienungsanleitung
Quick Start Guide
Important Notice
Please read carefully before you continue.
Purism SPC provides the enclosed product(s) under the fol-
lowing conditions:
This development board/kit/module is intended for use for ENGI-
NEERING DEVELOPMENT, DEMONSTRATION OR EVALUATION
PURPOSES ONLY and is not considered by Purism SPC to be a fin-
ished end-product fit for general consumer use. Persons handling the
product must have electronics training and observe good engineering
practice standards. As such the goods being provided are not intended
to be complete in terms of required design-, marketing-, and/or man-
ufacturing related protective considerations, including product safety
and environmental measures typically found in the products that in-
corporate such semiconductor components or circuit boards. This
development board/kit/module does not fall within the scope of the
European Union directives regarding electromagnetic compatibility,
FCC, CE or UL and therefore may not meet the technical requirements
of these directives or other related documents.
The user assumes all responsibility and liability for proper and safe
handling of the goods. Further, the user indemnifies Purism SPC from
all claims arising from the handling or use of the goods. Due to the
open construction of the product, it’s the user’s responsibility to take
any and all appropriate precautions with regard to electrostatic dis-
charge, conducted and radiated emissions.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE
NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDI-
RECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Purism SPC provides a limited warranty of 6 months against manufac-
turing defects. The device is manufactured, assembled and tested in
the United States of America (USA).
If you do not agree to the above terms then do not unpack /
use the board/kit/module and return the product as-is for a
full refund.
2
Package Contents
The Librem 5 is supplied with the following
components and accessories:
• Battery (installed)
• Tray for nano-SIM and microSD cards
(removable)
• USB A to USB C cable
• Wall power adapter
If any of these are missing, please contact Purism
support for guidance.
You Will Also Need
You will need to provide:
• A nano-SIM card
• A microSD card – optional
The nano-SIM card is supplied by your mobile network
provider.
You can use a microSD card to add additional storage
to the phone.
3
Install the Nano-SIM Card and microSD Card
The phone accepts a nano-SIM card and a microSD
card in the slot marked in the diagram below.
These are installed together using the tray included
with the phone.
To install the cards:
1. Insert the nano-SIM card into the tray
2. Insert a microSD card into the tray (optional)
3. Insert the tray into the socket
The socket should click as the card is latched into place.
4
Charge the Phone
The phone will need to be charged before it can be
used.
To charge the phone:
1. Connect the phone to the charger via the USB
cable provided
2. Place the phone on a flat, hard, level surface
3. Plug the charger into a suitable wall power outlet
Leave the phone to charge until the power indicator
shows a level of 50%.
Unplug the charger from the power supply.
Unplug the USB cable from the phone.
5
Power on the Phone
Enable the Modem and WLAN by pushing those
switches away from the SIM slot, as shown.
Ensure that the screen is visible.
Locate the power button.
Hold down the power button until the screen lights up.
6
Unlock the Screen
The phone will show a lock screen.
To unlock it, swipe up from the bottom of the screen to
reveal the passcode entry screen.
Enter the default six digit passcode – 123456 – using
the numeric keypad.
When you have entered your code the phone will
unlock.
You will be able to change the passcode later.
7
Initial Setup
The application starts with a Welcome screen.
Select the language that you wish to use.
If your language is not shown, expand the list to show
more languages by pressing the (view more) icon at
the bottom of the list.
Press the Next button to continue.
8
Text Input
The Typing page shows a selection of keyboards that
are relevant to your language.
Select the keyboard that you want to use.
Expand the list to find the one you want, if necessary.
Press the Next button to continue.
9
Wireless Internet
If the WLAN switch is enabled, the Network page is
shown. This lets you configure your wireless
connection to the network.
The WLAN interface may take a few seconds to list
nearby wireless networks.
Select a network to begin the connection process, or
swipe the list upwards to find the Other… item at the
bottom of the list. Select this to connect to a hidden
network.
10
Andere Handbücher für Librem 5
1
Inhaltsverzeichnis
Andere Purism Handy Handbücher
Beliebte Handy Handbücher anderer Marken
Point Mobile
Point Mobile PM60 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung
LG
LG LM-K420EMW Bedienungsanleitung
ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung