Purkeys INVERT Bedienungsanleitung

INVERT™ PURE SINE WAVE

USER GUIDE

300-1 Doc 1.00

P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net

CONTENTS

General Information ..........................................................................................2

General Inverter Safety......................................................................................3

General Cautions................................................................................................4

Call-outs ..............................................................................................................6

Installation...........................................................................................................6

Harness Gauge Recommendations ...........................................................8

Operation ............................................................................................................9

LED Logic.....................................................................................................9

Fault.............................................................................................................10

LVD Settings ..............................................................................................11

Buzzer..........................................................................................................12

Limited Commercial Warranty Policy...........................................................13

Purkeys’ Invert™ Pure Sine Wave inverters provide reliable

12 VDC to 110 VAC power in heavy-duty vehicles. ey are available in 1500

and 2000 watts.

GENERAL INFORMATION

DynaBalance™ Monitoring Technology

e Invert comes with a controller that measures input voltage and input

current (even under load) to dynamically estimate the battery’s state of

charge. is enables the controller to indicate available battery capacity and

turn o when the battery’s state of charge drops to turn-o point.

Inverters that do not have this functionality can turn o too late if the inverter

is only supplying a small amount of power, or too soon when the inverter is

supplying high power (such as when powering a microwave).

P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net

PRODUCT NAME INSTALLATION GUIDE

GENERAL SAFETY

Explosion Hazard:

Do not use the inverter near ammable fumes or gases. Do not use the

inverter in an enclosure containing automotive-type, lead-acid batteries, as

these batteries, unlike sealed batteries, vent explosive hydrogen gas, which can

be ignited by sparks from electrical connections.

Crash Hazard:

Drivers should not congure or troubleshoot the inverter while they are

driving the vehicle.

Shock Hazard:

Keep children away from the inverter; it generates the same potentially deadly

AC power as a normal household wall outlet.

Heated Surfaces:

e inverter housing may become uncomfortably warm, reaching 140˚ F (60˚

C) aer extended operation. Ensure that there are at least 2 inches (5 cm) of

space around the inverter. During operation, keep it away from ammable

materials.

Additional Safety Guidelines:

• Do not insert foreign objects into the inverter outlets or ventilation

openings.

• Never connect the inverter to power utility AC distribution wiring.

• Do not use the inverter in temperatures over 100˚ F (40˚ C)

• Do not expose the inverter to water, rain, snow, or spray.

• Do not use a 24 volt jumpstarter with the inverter connected to the

batteries.

is guide contains important information regarding safety and operation

of this product. Before use, read and understand all cautions, warnings, and

instructions. Failure to do so could result in injury and/or property damage. It

may also void your product warranty.

• Ensure the inverter negative DC input terminal or the battery negative

terminal is connected to earth ground if the inverter is used outside your

vehicle.

• Do not install in the engine compartment—install in a well-ventilated

area.

• Do not use with positive grounded electrical systems (the majority of

modern vehicles use negative grounded electrical systems).

• Observe correct polarity when connecting the inverter DC input

terminals to the battery. Connect the battery positive to the positive

input connector of the inverter and the battery negative to the inverter

negative input terminal. A reverse polarity connection will result in a

blown fuse and may cause permanent damage to the inverter. Damage

due to reverse polarity is not covered under warranty.

• Do not use the inverter if it is wet.

• Do not connect in parallel with another AC source.

• Disconnect appliance plug from inverter AC outlet before working on

the appliance.

• e metal chassis of the inverter and the ground terminal of the outlet(s)

are internally connected to the negative battery terminal on the inverter.

is means the metal chassis of the inverter and the AC load will

automatically be grounded.

• is inverter will not run high wattage applications that exceed the

output power limit or the surge power limit.

GENERAL CAUTIONS

To reduce the risk of re, electric shock, explosion or injury:

P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net

PRODUCT NAME INSTALLATION GUIDE

Precautions when working with batteries:

• Batteries contain very corrosive diluted sulphuric acid (electrolyte).

Precautions should be taken to prevent contact with skin, eyes, or

clothing.

• Batteries generate hydrogen and oxygen during charging, resulting in an

explosive gas mixture. Be sure to ventilate the battery area and follow the

battery manufacturer’s recommendations.

• Never smoke or allow ame near batteries.

• Be careful not to drop metal tools on the battery, as this could spark

or short circuit the battery or other electrical parts and could cause an

explosion.

• Remove metal items such as rings, bracelets, and watches when working

with batteries. Use caution when working with metal tools, as batteries

can produce a short circuit current high enough to melt/weld metals,

which can cause severe burn.

• If you need to remove a battery, always remove the ground terminal

from the battery rst.

• Do not insert objects into the air vents.

CALL-OUTS

Positive DC

connection

from battery

Negative DC

connection

from battery

Inverter controller

with LED indication

of battery status

3 X 120 VAC outlet

Pure sinewave

inverter

Positive DC

connection

from battery

Negative DC

connection

from battery

Inverter controller

with LED indication

of battery status

3 X 120 VAC outlet

Pure sine wave

inverter

2 X USB

charging ports

Inverter controller

quick release clip

REV:

Drawn By:

Tolerance:

.25"

.XX

.030"

.XXX

.005"

Date:

#INVERT 1500 FOR SPEC SHEET

Scale:

1:6

Page 1of3

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

PURKEYS. ANY REPRODUCTION IN PART

OR AS A WHOLE WITHOUT THE WRITTEN

PERMISSION OF PURKEYS IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

Eng Appr:

Date:

All dimensions are in inches

unless otherwise specified.

Part #:

3rd Angle

Weight:

6/15/2018

DRAFT

*On the 2000 watt inverter, each AC outlet has a 15 amp circuit breaker/on-o switch.

If the circuit breaker trips, reset the circuit breaker/switch by turning the switch

o, then back on. e switches can also be used to individually switch the three AC

outlets on or o.

P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net

PRODUCT NAME INSTALLATION GUIDE

INSTALLATION

Step 1: Select the best location and install the inverter in the cab or sleeper of

the tractor.

Step 2: Install the quick release clip

in a convenient location (i.e. the

interior wall of the tractor). It

can be installed in either of the

following ways:

• Use the provided velcro and

stick the clip to the selected

location.

• Use the provided athead

screws to mount the clip.

Step 3: Connect the cable to the REMOTE connection on the inverter, then to

the connection on the base of the controller.

* is ground stud is already connected internally to the battery ground stud, the

inverter housing, and the ground of the AC sockets; therefore, it does not need to

be connected in vehicle applications.

Wire Gauge

Maximum

Cable Length

(ft)

6 6

4 10

2 16

1 20

1/0 25

2/0 32

3/0 40

4/0 51

Wire Gauge

Maximum

Cable Length

(ft)

6 8

4 13

2 21

1 27

1/0 34

2/0 43

3/0 54

4/0 68

Installation Complete

Note: e inverter controller cable can be CAT5, CAT5e, or CAT6 and must

have male RJ45 connectors on both ends (shielded or unshielded are both

okay). e cable must be 8 position and 8 conductor (8p8c) and it cannot

be a cross-over cable. Most RJ45/Ethernet type cables will work as long as

the conductors are 24 gauge or larger.

We recommend :

• the conductors in the cable be 24 gauge or larger

• the cable be 16’ or shorter

HARNESS GAUGE RECOMMENDATIONS

1500 watt inverter: 150 amps with a

maximum voltage drop of 0.5 volts.

2000 watt inverter: 200 amps with a

maximum voltage drop of 0.5 volts.

e following tables show the maximum harness cable length

recommendations for both the 1500 and 2000 watt inverters.

Inhaltsverzeichnis

Andere Purkeys Wechselrichter Handbücher

Purkeys

Purkeys 1200+ Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung