Pyle PLCD27 Bedienungsanleitung
Car Audio Hifi System
WNER'S MANUAL
CD PLAYER
R
PLCD27
1
Band
Band tuner
Direct access tuning
Radio wiring
Speaker wiring
Install the unit
Removing the unit
Power
Volume
play/pause
eject
clock
loud
release
Volume setting
bass setting
treble settting
balance setting
fader setting
To p
scan
repeat
random
stop
2
To prevent injury of fire,take the
following precautions: To prevent damage to the machine,
take the following precautions:
Insert the unit unitll it is firmly locked to the
main unit, otherwise it may
fall out of place when jolted
When extending the ignition, memory
back up or ground cable, use diameter of
0.75mm(AWG18) or
more automotive grade cable to avoid wire
deterioration or damage
to the wire coating.
To prevent short circuit, never put or leave
any metallic object into the unit.
If you smell or see smoke, turn off the
power immediately and consult your dealer.
Be careful not to drop or shock the unit
strongly, it may break or crack because it
contain glass parts.
Be sure the unit is connected to a 12V
DC power with a Negative Ground
The unit is only designed for use with 4
speakers. Do not combine output for use
with 2 speakers. Do not ground negative
speaker leads to the chassis ground
Do not open the top cover and do not install
theunitin
place where it is exposed to direct sunlight
(including the faceplate),in order to avoid high
heat or humidity, water splash over it or dust.
Do not touch the terminals of the units.
Attaching panel
Attaching panel
Attach the front panel by fixing
the left side of it into this unit as1
showing.Then push the right side
of panel towards into connecting
plug as 2 showing.
If you have difficulty in installing this unit
in your vehicle. Please contact your dealer.
If the unit seems not work in properly press
the reset buttonto reset the memory of the
unit.
Power
Turning ON the power
Press the [PWR]button.
If a disc has already been loaded, CDIN would be shown on
the display, press this button to start play disc even though
the unit is in Radio mode. When disc
is playing, press this button to
pause the disc, press again
to resume the normal play.
Volume
Play/pause
Press to turn on the unit power,Press the button to turn off
the unit.
Play
Press the [CD]button
Pause
Press again the [CD]button
3
Increasing volume
Decreasing
Rotate the [VOL+]button
Rotate the [VOL-]button
VOL+
VOL-
PUSH
ON/OFF
VOL
TOP SCAN REPEAT RANDOM STOP
1256
34 CLK
DSP
EJECT
CD
BD
SELECT
POWER ON/
OFF/VOLUME PLAY/PAUSE
SELECT CLOCK
EJECT
DSP
LCD display
RELEASE
D
OM
RANDOM
STOP
56CLK
CD
BD
Eject
In beam mode, press the BD button can enter radio
mode. If the disc in the slot, press the EJECT button to
eject the disc form the slot and automatically be
switched to the radio mode.
In radio mode, if push a disc into slot, the disc will
automatic insert and begins to play. If the disc in the solt,
press PLAY/PAUSE button to play the disc again.
Clock
Press CLK can display time. Time will display even
power off.
Long Press CLK for 3 second will into clock set mode.
4
Out
In
Press the [ ]button ,if having adisc in the unit.
The disc will be ejected out.
Press the [ ]button again, the disc
will be load in.
LOUD/DSP
Press [ ] button to adjust the hour.
Hour
If there no operation in 5 second, it will quit clock
set mode.
Minute
Quit clock set mode
Press [ ] button to adjust the minute.
Release
press the " " button to release faceplate.
Short press this button to DSP
Press DSP button once, ROCK will bicker on display.
Press DSP button twice, POP will bicker on display.
Press DSP button third, CLASS will bicker on display.
DSP
Long press the DSP button to emphasize the bass output,
press it again to resume the normal listening.
LOUD
Treble set mode
Press SEL button third,
display shows TRE ,then
rotate the volume + button to adjust treble
level up. Rotate the volume - buttonto adjust
treble level down.
Press SEL button fourth
display shows BAL ,then
rotate the volume + button
to adjust left speaks level .
Rotate the volume - button
to adjust right speaks level .
Balance set mode
Fader set mode
Press SEL button fifth,display shows FAD ,then
rotate the volume + button to adjust front speaks
level. Rotate the volume - buttonto adjust back
speaks level.
Speaker mode
5
PRESS
SELECT
Press SEL button once,display shows VOL ,
then rotate the volume + button
to adjust volume level up.Rotate
the volume - button to
adjust volume
level down.
Volume set mode
Bass set mode
Press SEL button twice,displayshows BAS ,
then rotate the volume + button to adjust bass
level up. Rotate the volume - button to adjust
bass level down.
VOLUME BASS
BALANCE
TREBLE
FADER
In press mode, VOL is sel function
VOL
SEL
VOL+
VOL-
PRESS
PUSH
ON/OFF
VOL
TOP SCAN REPEAT RANDOM STOP
125634 CLK
DSP
EJECT
CD
BD
SELECT
TOP REPEAT
RANDOMSCAN
STOP
SELECT
VOL+/-
6
Top
Repeat
Random
Scan
Select the first track directly
In CD mode,press this button, the first track will play.
Press [TOP]button
Press the button once to repeat the same track continuously,
Press the button twice to repeat the disc continuously,
RPT will appear on the LCD display.
Press [RPT]button
Press this button to play all the track inrandom order. RDM
will appear on the display. Press it again to stop random playing.
This button is invalid ifthe unit is in PBC On mode.
Press [RDM]button
Press this button once for TRACK INTRODUCTION,the first
ten seconds of each track on the disc will paly. To confirm
the track number. Press it again while playing on the desired
track. SCAN will appear on the display.Press it again to
stop it.
Press [SCN]button
Stop
Press this button once to stop play music .
Press [STOP]button
Band
Tune
Press BAND button to select among three FM or two AM bands.
(FM1-FM2-FM3-AM1-AM2)
Selecting band
the long press button it can automatically select
frequency station. And the long press it can automatically
select lower frequency station.
higher
In radio mode:
manual tuning:
short press button it can select higher frequency station.
Short press can select lower frequency station.
Auto loading tuning:
7
Frequency
ST
PUSH
ON/OFF
VOL
TOP SCAN REPEAT RANDOM STOP
1256
34 CLK
DSP
EJECT
CD
BD
SELECT
SEEK+SEEK-
BAND
PRESET MEMORY 1-6
APS
MONO
LOUD CLK STOP TOP
RPT
SCAN
RDM
Basic operation
Pull out
Loading and replacing the battery
Use one lithium battery(CR2025)
insert the batteries with the +and - poles aligned properly.
Following the illustration inside the case.
Store unused batteries out of the reach of children. Contact a
doctor immediately if the battery is accidentally swallowed.
Do not set the remote on hot places such as above the dashboard.
Turning ON the power
Press the [ ]button.
Press to turn on the unit power,Press the button to turn off
the unit.
8
External view
........ Number of items External view
........ Number of items
The use of any accessories except of those provided
might result in damage to the unit .make sure only to
use the accessories shipped with the unit ,as shown
above.
9
1
2
3
5
6
............1
............1
............1
............1
............1
............1
7
............2
4
Remote operation the same
of mainframe.
Radio control
Page(7)
Play
Press the [ ]button
Pause
Press the [ ] button again
Play/pause
Increasing volume
Increasing volume
Press the [+]loud VOL
Volume
Press the [-]low VOL
APS MONO
LOUD CLK STOP TOP
RPT
SCAN
RDM
8............1
Inhaltsverzeichnis
Andere Pyle Autoradiosystem Handbücher
Pyle
Pyle PL97M4 Bedienungsanleitung
Pyle
Pyle PLTWVS Bedienungsanleitung
Pyle
Pyle PLDVD138 Bedienungsanleitung
Pyle
Pyle PLDVD132 Bedienungsanleitung
Pyle
Pyle View PLTNV66 Bedienungsanleitung
Pyle
Pyle PLR15MUA Bedienungsanleitung
Pyle
Pyle PLD128 Bedienungsanleitung
Pyle
Pyle PLDCP6 Bedienungsanleitung
Pyle
Pyle PLCDCS220MP Bedienungsanleitung
Pyle
Pyle PYLE PLVSMR7 Bedienungsanleitung
Pyle
Pyle View PLTDN71 Bedienungsanleitung
Pyle
Pyle PLCD5MRBTS Bedienungsanleitung
Pyle
Pyle PBT92 Bedienungsanleitung
Pyle
Pyle PLCD44 Bedienungsanleitung
Pyle
Pyle View PLTDN70 Bedienungsanleitung
Pyle
Pyle PLMCA40 Cycle Series Bedienungsanleitung
Pyle
Pyle PYLE Plus Series PLCDUSB78MP3 Bedienungsanleitung
Pyle
Pyle PLMR22BT Bedienungsanleitung
Pyle
Pyle PYLE PL90MU Bedienungsanleitung
Pyle
Pyle PLD57MU Bedienungsanleitung
