www.NutriChefKitchen.com www.NutriChefKitchen.com
4 5
14. To avoid injuries such as scalding, do not let children operate the
appliance alone.
15. If you have a pacemaker, you should consult with your doctor
before you take advantage of any induction cooking device
16. Do not place on or near a hot gas , electric burner, or in a heated
oven
17. To avoid danger, do not place paper, aluminium foil, cloth or other
unsuitable articles onto the induction cooker heating plate for
indirect heating.
18. Do not place the unit on the cloth or carpet to avoid blocking the
rear exhaust vent.
19. Please kindly avoid hitting the plate of the unit, in case of getting
cracked, should turn off the unit and plug out immediately and
then contact with service points of our company.
20. Do not touch the control panel with any sharp objects.
21. Do not place any metal on the unit while operating.
2. PRODUCT OPERATING INSTRUCTIONS
1. Place suitable cooking utensils in the center of the top plate.
2. Insert the plug in to AC 120V, 60Hz Socket, Press ON/OFF to switch
on, after pressing Function, The default “Fry” will auto select.
Different cooking functions, setting and adjustments.
3. To switch off, Press ON/OFF again, then plug out to shut off power.
2.1 COOKING MODE:
1. Right Side/Left Size:
1. Manual Control Function: Fry, Steam, Water, Fry Function:
• Press the [Function] key until the indicator of [Fry] remain light up,
display will show [900] representing that the default power is 900W.
It can be adjusted by pressing the [+] or [-] key to set the desired
Power level. • There are 8 Power levels in total
(140-210-260-300-350-390-430-460°F, Default 300°F)
• To Cancel this mode, press to Function mode or [On/Off] key to stop
the operation.
• Time: 4 Hours Timer
Steam Function:
• Press the [Function] key until the indicator of [Steam] remain light
up, display will show[1300] representing that the default power is
1300W. It can be adjusted by pressing the [+] or [-] key to set the
desired Power level.
• There are 8 Power levels in total
(140-210-260-300-350-390-430-460°F, Default 390°F)
• To Cancel this mode,press to Function mode or [On/Off] key to stop
the operation.
• Time:23:59 Hou rs Preset
Water Function:
• Press the [Function] key until the indicator of [Water] remain light up,
display will show[1800] representing that the default power is 1800W.
It can be adjusted by pressing the [+] or [-] key to set the desired Power
level.
• There are 8 Power levels in total
(140-210-260-300-350-390-430-460°F, Default 460°F)
• To Cancel this mode,press to Function mode or [On/Off] key to stop
the operation.
• Time:4 Hours Timer
