Pyle PSTMP95 Bedienungsanleitung
USER MANUAL
PSTMP95
DigitalTableTopSteam Press
CONTENTS
Features of the Elite.....................................................1
Safety Reminders......................................................2
Part Identification...................................................3-4
Steam Press Operation
reparation for use.....................................................5
Filling the water tank..................................................5
Turning on the power..................................................5
Selecting the temperature...........................................6
Steam Control Notes...................................................7
Pressing....................................................................8
Finishing Pressing.......................................................9
Cleaning..................................................................10
Suggestion for Success..............................................11
Use of the Pressing Cushion.......................................12
Techniques for Pressing.........................................13-14
Troubleshooting...................................................15-16
P
Digital Table Top Stream Press
50% Faster Than Traditional Ironing
Safe for Nylon, Silk Rayon, Wool, Cotton, Linen, and more
Non-Stick and Anti-Shine Ironing Surface Coating
Even Pressure Ensures Sharp, Long-Lasting Creases
'Steam Burst' Function Blasts Away Wrinkles
Advanced Digital Control Center
Variable Temperature Selection
Quickly Steam Press and Remove Wrinkles
Multiple Dry-Heat & Steam Settings for Different Fabrics
Easy-to-Use and Safe One-Hand Operation
Extra Gentle Against Fabrics Like Silk
(7) Times the Size of Regular Irons
Iron Surface Size: 22'' x 10''
Ready Indicator Lights
Auto Shut-Off Safety Feature
10 oz. Refillable Water Tank
Accessories Included: Spray Bottle, Pressing Cushion & Water Fill Cup
1350 Watt Power
Dimensions: 26.7 x 10.2 x 22.0 inches
Weight: 26.4 Lbs.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
1
ØTo protect against the risk of electric shock, do not immerse the
appliance in water.
ØDo not let the cord hang over the edge of counters.
ØDo not allow the cord to touch hot surfaces.
ØAlways allow the appliance to cool for at least thirty minutes before
storing.
ØAlways put the appliance in a secure place on a table or counter when
using.
ØDo not move the appliance without unplugging it first.
ØThe appliance has very hot surfaces - Do not allow unsupervised children
to use the appliance.
ØAlways disconnect the appliance from the outlet before filling with or
removing water. Be careful to avoid spilling water on the appliance when
filling.
ØUse distilled water in the appliance. Do not use perfumed or products
containing alcohol in the appliance.
ØAlways disconnect the appliance when not in use.
ØDo not use the appliance if the cord gets damaged. Return the appliance
or have the cord repaired by the manufacturer, his service agent or a
similarly qualified person.
ØDo not operate the appliance if it has been dropped or damaged. Do not
disassemble the appliance. Incorrect reassembly can cause a risk of
electric shock. Send it to an authorized service center for repair.
ØDo not operate another high wattage appliance on the same circuit.
ØThis appliance must be grounded. Do not alter the plug or attempt to
defeat this feature.
ØBe careful. Burns can occur from touching hot metal parts, hot water or
steam.
ØThis appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the appliance safely.
ØYoung children should be supervised to ensure that they do not play with
the appliance.
THIS UNIT IS FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS
WARNING
Read all of the instructions and then save them for future reference.
SAFETY REMINDERS
2
PART IDENTIFICATION
1. The Pressing Handle raises and lowers the Pressing Plate. By lowering the
Pressing Handle until it reaches the lowest point possible you automatically
obtain maximum pressure.
2. The Locking Knob will lock together the Pressing Plate and Ironing Board. Turn
the Locking Knob to the locked position to carry or store the Steam Press.
3. The Red Steam Burst Button on the handle grip produces a burst of steam
when pressed.
4. The Pressing plate is the temperature controlled surface that heats and presses
the fabric.
5. The Ironing Board is the padded surface that holds the fabric during pressing.
6. The Power Light (Red) is illuminated when the unit is on.
7. The Ready Light (Green) goes off when the Press has reached the selected
temperature.
8. The Steam Ready Light (yellow) goes on when the unit is ready to produce
bursts of steam.
9. The [ POWER ] button to turn ON/OFF the appliance.
10. Press the [ SELECT ] button arrows to set the desired temperature for each
fabric. NOTE: Steam will only be available on the three highest settings.
11. The Water Tank slides forward and is filled through holes in the top. The Water
Level can be seen through the front of the tank. Slide the tank forward for a
better view.
12. The Ironing Board Cover is removable and washable for extended use.
3
132
4
12
11
5
678910
4
13. The Pressing Cushion is a fabric covered pad used for pressing gathered
or contoured areas such as sleeves, darts, and yokes.
14. A plastic water Spray Bottle is used for dampening fabric before pressing.
15. A Water Container is used for filling the Water Tank.
The following information is provided for service by a qualified electrician only:
Rated voltage: 120V~, 60Hz, 1350W
WARNING:
This appliance must be grounded. Use only the proper type outlet when
plugging in the appliance. Do not attempt to override the ground wire feature.
13 14 15
STEAM PRESS OPERATION
STEP1 - PREPARATION FOR USE
Set the appliance on a sturdy work surface. Unlock the Locking Knob.
STEP 2 - FILLING THE WATER TANK
BEFORE PLUGGING IN THE APPLIANCE, fill the water tank;
a. Always make sure the appliance is unplugged before filling the tank.
b. Fill the Water Tank with the Pressing Plate lifted to the raised (up) position.
Slide the Water Tank towards the front of the unit. It will not come
completely out so do not force it to do so. Using the Water Container,
slowly pour the distilled water into the Water Tank Fill Holes(C).
c. Be careful to avoid spilling water onto the Steam Press when filling.
d. Slide the Water Tank back into its recessed position.
STEP 3 - TURNING ON THE POWER
a. Make sure the Locking Knob (D) is in the open position allowing free
movement of the Pressing Plate before plugging in the appliance.
b. Lift the Pressing plate to the fully raised (up) position.
c. Plug the appliance into an electric outlet.
d. Press the [ POWER ] button and the Red Power light will shine.
D
5
C
STEP 4 SELECTING THE TEMPERATURE
Press the [ SELECT ] arrow buttons to choose the kind of fabric you wish to
press. Press to move selection to higher setting and press to move
selection to lower setting.
a. Examine the garment label if unsure and look up the type on the chart.
IMPORTANT NOTE: If you can not determine the type of fabric, begin with
the lowest setting and increase the temperature as desired until you obtain
the proper results.
b. When the Green Ready Light goes off, the Pressing Plate has reached the
temperature for the desired setting.
c. When changing the setting from a higher selection to a lower setting allow
several minutes for the Pressing Plate to cool sufficiently after making the
change.
IMPORTANT NOTE: You may find it more efficient to arrange your fabrics
from those requiring the lowest setting to those requiring the highest setting
and proceed accordingly. This will avoid any unnecessary delay or wait for the
Pressing Plate to cool.
FABRIC COTTON LINENWOOLRAYONSILKNYLON
100 C
212 F
130 C
266 F
140 C
284 F
160 C
320 F
200 C
392 F
210 C
410 F
STEAM NO NO NO YES YES YES
6
STEP 5 - STEAM CONTROL
IMPORTANT NOTE: Steam is produced only when the Yellow Steam Ready
light is on.
The Green Ready Light goes off when the unit has reached the desired
temperature. The Yellow Steam Ready Light will come on when the unit is
ready to produce steam.
IMPORTANT NOTE: If this is the first time you are using the Steam Press
or you have been storing it for some time, lift the Pressing plate into the
raised position and press the Steam Burst Button several times until the
steam begins to flow.
IMPORTANT NOTE: The Steam Burst function can only be used when the
Steam Ready Light is on AND the steam press is in a slightly opened position.
Do not use the Steam Burst function when the steam press is closed, or you
may damage the unit.
IMPORTANT NOTE: Do not press the Steam Burst Button for more than 5
seconds or water may drip on your garment.
7
STEP 6 - PRESSING
a. Lift the Pressing Handle (A). The Pressing Plate (B) moves to the up
position.
b. Carefully arrange the garment to be pressed onto the Ironing Board (C).
c. Grasp the handle of the Pressing Plate(A) and lower it onto the Ironing
Board (C), capturing the garment between the two halves of the Steam
Press. For light duty Pressing, simply lowering the handle and allowing the
Pressing Plate to rest on the Ironing Board will be sufficient. Return to the
open position. For heavier duty pressing, continue to grasp the handle
and press downward until the Pressing Plate is pushed to its lowest
position, then open the press.
d. If the temperature is set high enough you may give the fabric a burst of
steam by pressing the Steam Burst Button (D) to remove stubborn
wrinkles. Lower the pressing plate until it is about two inches from the
garment. Press the Steam Burst Button for about 3-5 seconds. After
releasing the Steam Burst Button you may fully lower the pressing plate.
NOTE: Do not press the Steam Burst Button when the pressure
plate is in its lowest (closed) position.
e. After a few seconds, lift the handle and raise the Pressing Plate back to the
raised position.
IMPORTANT NOTE: If you forget to raise the Pressing Plate or become
distracted, the machine will give a warning beep and automatically shut-off
heating after approximately 10 seconds. The steam press will be completely
shut-off after 15 minutes of no activity with the press in the open position.
8
A
B
D
C
Inhaltsverzeichnis
Andere Pyle Elektrowerkzeuge Handbücher
