Pyle Wave PLE702B Bedienungsanleitung
7-BAND equalizer
with subwoofer crossover
and bass boost
user’s manual
7-BAND equalizer.amplifier
with subwoofer crossover
and bass boost
P E702B
P E702BP E755S
P E755S
for choosing Pyle Audio, and congratulations on joining a select group
of dedicated enthusiasts committed to the very best in mobile sound
performance and dependability.
You are now the proud owner of one of the world’s most sophisticated
electronics components. This Pyle product is the result of an extensive
engineering program with the sole purpose of creating the finest mobile
audio experience imaginable. We’re confident that this product will
provide you with many years of outstanding musical entertainment.
P E702B
congratulations...
P E702B
general features
P E755S
2
3
electrical connections
P E702B/P E755S8
mounting and installation 9
table of contents 1
P E702B
features and controls
P E755S
4-5
6-7
precautions and troubleshooting 13
P E702B
system wiring
P E755S
10
11-12 P E755S
table of contents
2
general features
· 7-Band Graphic Equalizer
· Built-In 4 Channel Amplifier
· Pre-Amp Input via RCA Jacks
· Output Level Control
· LED Power Level Meter
· 12 dB Boost/Cut per Frequency Band
· Rotary Front-Rear Fader Control
· Independent Subwoofer Crossover
P E702B
7-Band Equalizer/Amplifier
with Subwoofer Crossover and Bass Boost
· 0 - +18dB Bass Boost Control
· Subwoofer RCA Outputs
· Remote Power On/Off
· High Impedance RCA Inputs
· Half-DIN Size Cabinet
P E755s
7-Band Equalizer
with Subwoofer Crossover and Bass Boost
3
general features
· 7-Band Graphic Equalizer
· Pre-Amp Input via RCA Jacks
· Output Level Control
· LED Power Level Meter
· 12 dB Boost/Cut per Frequency Band
· Rotary Front-Rear Fader Control
· Independent Subwoofer Crossover
· 0 - +18dB Bass Boost Control
· Front, Rear and Subwoofer RCA Outputs
· Remote Power On/Off
· High Impedance RCA Inputs
· Half-DIN Size Cabinet
OUTPUT
SUB
INPUT
INE
150Hz400Hz1.4KHz2.4KHz6KHz
65Hz
max
Vol
RIGHT
Output evel
EFT
Output evel
POWER
front rear
series
P
E702B
Subwoofer
freq level
40 400 0 +18dB
15KHz
fader
P E702B
4
R R
features and controls
equalizer controls subwoofer
frequency control subwoofer
boost control
fader control volume control
LED level display
power indicator LED
power & speaker connections sub channel
outputs
power connections stereo inputs
front
rear
P E702B
7-Band Equalizer/Amplifier
with Subwoofer Crossover and Bass Boost
LED level display
power indicator LED
fader control
volume control
equalizer controls
subwoofer frequency control
subwoofer boost control
power connections
subwoofer channel outputs
line channel inputs
speaker connections
these rows of LEDs display the Amplifier Output Levels. Left and right channels are
displayed independently at peak levels.
this LED is illuminated when the unit is properly powered, grounded and the remote
power has been turned on.
• in a 4 Speaker system, rotating the knob to the FRONT side increases the level
of the front speakers; rotating to the REAR side increase level of the rear speakers.
At mid position, both sets of speakers are at maximum level.
• in a 2 Speaker system, the fader control should be rotated to the position which
provides highest levels for both sets of speakers.
allows adjustment of sound level for particular program material or source.
this seven-band equalizer gives you control over the output levels at various
frequencies.
lets you adjust the subwoofer frequency and crossover point from 40-400 Hz.
lets you adjust the subwoofer boost level from a 0 to +18 dB increase.
connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the car battery or other power
source.
GROUND: Connect a black wire of at least 12 gauge to car chassis for
ground connection
REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo
or other head unit.
RCA cables are used to connect the sub outputs to the subwoofer amplifier inputs.
RCA cables are used to connect the front input signal from head unit or other source.
the connections are used to power a front and rear speaker systems
5
features and specifications
center frequencies 65 Hz ·150 Hz
400 Hz ·1.4 KHz
2.4 KHz ·6 KHz
15 KHz
frequency response 20 - 20 KHz (+/– 1 dB)
input level
(for 10% THD output) 200 mV
total harmonic distortion (THD)
(at 15W output) < 0.5%
speaker impedance 4-8 Ohms
signal-to-noise ratio (S/N) 90 dB
separation 60 dB
current drain 6A maximum
power supply voltage 10-16V DC Neg. Ground
160x29x140
6.3 x 1.1 x 5.5
dimensions (WxHxL)
mm
inches
subwoofer crossover 40 - 400 Hz
bass boost 0-+18dB
amplifier power 30 Watts (RMS) x 4
150Hz400Hz1.4KHz2.4KHz6KHz
65Hz
max
Vol
RIGHT
Output evel
EFT
Output evel
POWER
front rear
series
P
E755S
Subwoofer
freq level
40 400 0 +18dB
15KHz
fader
P E755S
6
OUTPUT
SUB REAR FRONT
INPUT
INE
R R R R
features and controls
equalizer controls subwoofer
frequency control subwoofer
boost control
fader control volume control
power indicator LED
sub channel
outputs rear channel
outputs front channel
outputs
power connections stereo inputs
front
rear
LED level display
7
LED level display
power indicator LED
fader control
volume control
equalizer control
subwoofer frequency control
subwoofer boost control
power connections
subwoofer channel outputs
front channel inputs
these rows of LEDs display the Preamp Output Levels. Left and right channels are
displayed independently at peak levels.
this LED is illuminated when the unit is properly powered, grounded and the remote
power has been turned on.
• in a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT side increases
the level of the front speakers; rotating to the REAR side increase level of the rear
speakers. At mid position, both sets of speakers are at maximum level.
• in a 2 Speaker system, the fader control should be rotated to the position which
provides highest levels for both sets of speakers.
allows adjustment of sound level for particular program material or source.
this seven-band equalizer gives you control over the output levels at various
frequencies.
lets you adjust the subwoofer frequency and crossover point from 40-400 Hz.
lets you adjust the subwoofer boost level froma0to+18dBincrease.
connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the car battery or other power
source.
GROUND: Connect a black wire of at least 12 gauge to car chassis for
ground connection
REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo
or other head unit.
RCA cables are used to connect the sub outputs to the subwoofer amplifier inputs.
RCA cables are used to connect the front input signal from head unit or other source.
P E755S
7-Band Equalizer
with Subwoofer Crossover and Bass Boost
features and specifications
center frequencies 65 Hz ·150 Hz
400 Hz ·1.4 KHz
2.4 KHz ·6 KHz
15 KHz
frequency response 20 - 20 KHz (+/– 1 dB)
input level
(for 400mV output) 400 mV
total harmonic distortion (THD)
(at 400mV output) < 0.03%
output impedance 10K Ohms
signal-to-noise ratio (S/N) 90 dB
separation 50 dB
current drain 450 mA
power supply voltage 12V DC Neg. Ground
160x29x117
6.3 x 1.1 x 4.6
dimensions (WxHxL)
mm
inches
subwoofer crossover 40 - 400 Hz
bass boost 0 - +18 dB
P E702B
P E755S
8
electrical connections
PLE702B•PLE755S
rear
rear
OUTPUT
SUB REAR FRONT
INPUT
INE
OUTPUT
SUB
INPUT
INE
to remote turn-on
+12V head unit
ORANGE WIRE
12V battery
RED WIRE
Fuse 6A BLACK WIRE
Fuse 0.5A
to remote turn-on
+12V head unit
ORANGE WIRE
12V battery
RED WIRE
Fuse 1A
BLACK WIRE
Fuse 0.5A
Andere Handbücher für Wave PLE702B
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Pyle Stereo-Equalizer Handbücher
