Pylontech US3000C Bedienungsanleitung

Rechargeable Li-ion Battery

US3000C Operation Manual

Information Version: 1.1

20CQSV0902

 
 
This  manual  introduces  US3000C  from  Pylontech.  Please  read  this  manual 
before you to install the battery and follow the instruction carefully during the 
installation process. Any confusion, please contact Pylontech immediately for 
advice and clarification. 
 
Safety Precautions 1 
1 Before Connecting 2 
2 In Using 2 
Introduction 3 
1 Features 3 
2 Specification 4 
3 Equipment interface instruction 6 
Definition of RJ45 Port Pin 8 
Safe handling of lithium batteries guide 10 
1 Schematic diagram of solution 10 
2 Danger label 10 
3 Tools 11 
4 Safety gear 11 
Installation and operation 12 
1 Package items 12 
2 Installation location 13 
3 Grounding 15 
4 put into cabinet or racks 16 
5 Put into bracket 18 
6 power on 21 
7 Power off 22 
8 Multi-group mode 23 
Trouble shooting. 25 
Emergency Situations 28 
Remarks 29 
 

1. Safety Precautions

Reminding

1) It is important and necessary to read the user manual carefully (in the

accessories) before installing or using battery. Failure to do so or to follow

any of the instructions or warnings in this document can result in electrical

shock, serious injury, or death, or can damage battery, potentially rendering

it inoperable

2) If the battery is stored for long time, it is required to charge them every six

months, and the SOC should be no less than 90%

3) Battery needs to be recharged within 12 hours, after fully discharged

4) Do not install the product in outdoor environment, or an environment out of

the operation temperature or humidity range listed in manual.

5) Do not expose cable outside

6) Do not connect power terminal reversely.

7) All the battery terminals must be disconnected for maintenance

8) Please contact the supplier within 24 hours if there is something abnormal.

9) Do not use cleaning solvents to clean battery

10) Do not expose battery to flammable or harsh chemicals or vapors

11) Do not paint any part of battery, include any internal or external components

12) Do not connect battery with PV solar wiring directly

13) The warranty claims are excluded for direct or indirect damage due to items

above.

14) Any foreign object is prohibited to insert into any part of battery

Warning

1.1 Before Connecting

1) After unpacking, please check product and packing list first, if product is

damaged or lack of parts, please contact with the local retailer

2) Before installation, be sure to cut off the grid power and make sure the

battery is in the turned-off mode

3) Wiring must be correct, do not mistake the positive and negative cables,

and ensure no short circuit with the external device

4) It is prohibited to connect the battery and AC power directly

5) The embedded BMS in the battery is designed for 48VDC, please DO NOT

connect battery in series

6) Battery must connect to ground and the resistance must be less than 0.1Ω

7) Please ensured the electrical parameters of battery system are compatible

to related equipment

8) Keep the battery away from water and fire.

1.2 In Using

1) If the battery system needs to be moved or repaired, the power must be

cut off and the battery is completely shutdown

2) It is prohibited to connect the battery with different type of battery.

3) It is prohibited to connect batteries with faulty or incompatible inverter

4) It is prohibited to disassemble the battery (QC tab removed or damaged);

5) In case of fire, only dry powder fire extinguisher can be used, liquid fire

extinguishers are prohibited

6) Please do not open, repair or disassemble the battery except staffs from

Pylontech or authorized by Pylontech. We do not undertake any consequences

or related responsibility which because of violation of safety operation or

violating of design, production and equipment safety standards.

2. Introduction

US3000C lithium iron phosphate battery is the new energy storage products

developed and produced by Pylontech, it can be used to support reliable power

for various types of equipment and systems.

US3000C has built-in BMS battery management system, which can manage

and monitor cells information including voltage, current and temperature.

2.1 Features

1) NEW: Build-in soft-start function able to reduce current strike when inverter

need to start from battery.

2) NEW: Dual active protection on BMS level.

3) NEW: Automatic address setting when connect in multi-group.

4) NEW: Support wake up by 5~12V signal from RJ45 port.

5) NEW: Support upgrade battery module from upper controller via CAN or

RS485 communication.

6) NEW: Enable 95% depth of discharge, available for the inverter which

completely follow Pylontech latest protocol to operate.

7) The module is non-toxic, non-polluting and environmentally friendly

8) Cathode material is made from LiFePO4 with safety performance and long

cycle life

9) Battery management system (BMS)has protection functions including over-

discharge, over-charge, over-current and high/low temperature

10) The system can automatically manage charge and discharge state and

balance voltage of each cell

11) Flexible configuration, multiple battery modules can be in parallel for

expanding capacity and power

12) Adopted self-cooling mode rapidly reduced system entire noise

13) The module has less self-discharge, up to 6 months without charging it on

shelf, no memory effect, excellent performance of shallow charge and

discharge

14) Small size and light weight, standard of 19-inch embedded designed

module is comfortable for installation and maintenance

15) Compatible with the US2000C, US3000, and US2000.

2.2 Specification

Basic Parameters

US3000C

Nominal Voltage (V)

Nominal Capacity (Wh)

3552

Usable Capacity (Wh)

3374.4

Dimension (mm)

442*420*132

Weight (Kg)

Discharge Voltage (V)

44.5 ~ 53.5

Charge Voltage (V)

52.5 ~ 53.5

Recommend Charge/Discharge Current (A)

Max. Charge/Discharge Current (A)

Peak Charge/Discharge Current (A)

90A@15sec

Communication

RS485, CAN

Depth of discharge (%)

Configuration (max. in 1 battery group)

16pcs

Working Temperature

0℃~50℃Charge

-10℃~50℃Discharge

Shelf Temperature

-20℃~60℃

Protective class

IP rating of enclosure

IP20

Humidity

5 ~ 95%(RH)

Altitude(m)

<2000

Certification

TÜV / CE / UN38.3/UL

Design life

10+ Years (25℃/77℉)

Cycle Life

>4,500 25℃

Reference to standards

IEC62619, IEC63056,

IEC62040, IEC62477-1,

UL1973,UL1642,VDE2510-50,

IEC61000-6-2,IEC61000-6-3,

UN38.3

2.3 Equipment interface instruction

Power Switch

ON: ready to turn on.

OFF: power off. For storage or shipping.

Start

Turn on: press more than 0.5s to start the battery module

Turn off: press more than 0.5s to turn off the battery.

RUN

Green LED lighting to show the battery running status

Alarm

Red LED flashing to show the battery has alarm; lighting to show the battery is

under protection.

SOC

6 green LEDs to show the battery’s current capacity.

ADD Switch

Dip1: RS485 baud rate 1: 9600; 0: 115200

Dip2~4, reversed.

Console

For manufacturer or professional engineer to debug or service.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pylontech Kamerazubehör Handbücher

Pylontech

Pylontech Force-L1 Bedienungsanleitung

Pylontech

Pylontech PowerCube-M1 Bedienungsanleitung

Pylontech

Pylontech US5000 Series Bedienungsanleitung

Pylontech

Pylontech US3000 Plus Bedienungsanleitung

Pylontech

Pylontech UP2500 Bedienungsanleitung

Pylontech

Pylontech RV12100 Bedienungsanleitung

Pylontech

Pylontech US3000B Plus Bedienungsanleitung

Pylontech

Pylontech UP5000 Referenzhandbuch

Pylontech

Pylontech Phantom-S Bedienungsanleitung

Pylontech

Pylontech PowerCube-M1 Bedienungsanleitung

Pylontech

Pylontech US2000 Bedienungsanleitung

Pylontech

Pylontech Phantom-S Bedienungsanleitung

Pylontech

Pylontech US2000 PLUS Bedienungsanleitung

Pylontech

Pylontech PowerCube-H1 Bedienungsanleitung

Pylontech

Pylontech UP2500 Bedienungsanleitung

Pylontech

Pylontech US5000-B Bedienungsanleitung

Pylontech

Pylontech Phantom-S Bedienungsanleitung

Pylontech

Pylontech US Series Installationsanleitung

Pylontech

Pylontech US2000B+ Bedienungsanleitung

Pylontech

Pylontech PowerCube-H1 Bedienungsanleitung

Pylontech

Pylontech US2000 Bedienungsanleitung

Pylontech

Pylontech RV12100 Bedienungsanleitung

Pylontech

Pylontech PowerCube-H1 Bedienungsanleitung

Pylontech

Pylontech Pelio-L-5.12 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung