Q-See QS218-411 Bedienungsanleitung

Quick Installation Guide

8 Channel H.264 Compression DVR with

(CIF) Real-Time Recording and

4 Color CMOS Camera Kits

MODEL QS218-411

Q-SEE QUICK INSTALLATION GUIDE

-4

1 | Page

4 - Color CMOS Cameras with Stands

(2) QSM1424C (6mm Lens)

(2) QSM1424W (3.6mm Lens)

Remote

Control

USB 2.0

Mouse

Ethernet

Cable

BNC (M) - RCA (F)

Adapters

(2 Included)

Camera Cables

(4 Included)

Power Supply &

4 -Way Splitter

For Cameras

Pre-Installed

Hard Drive

User’s

Manual

Software

Power Supply

for DVR

QS218 DVR

PART 1 - PACKAGE CONTENTS:

Q-SEE QUICK INSTALLATION GUIDE

-4

2 | Page

PART 2 - DVR CAMERA AND POWER CONNECTIONS

Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated.

Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of

10 nanoseconds or less.

WARNING: Power supply for DVR is 19 Volt, power supply for CAMERAS is 12 Volt, make sure

you use the correct power supply for the correct device.

Q-SEE QUICK INSTALLATION GUIDE

-4

3 | Page

PART 4 - CONNECTING THE DVR TO YOUR TV

1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR.

2. Connect the other end of the RCA cable to the Video Input on the TV if you are using a television screen.

3. If you are using a PC monitor, plug the VGA cable (not included) to the VGA port on the DVR.

4. Connect the other end of the VGA cable to the monitor.

Q-SEE QUICK INSTALLATION GUIDE

-4

4 | Page

PART 5 - DVR CONTROLS: FRONT PANEL

Item

Number Name/Symbol Description

1 STANDBY Press to set the system in standby mode.

2 IR SENSOR IR Receiver for remote control.

3 LED INDICATORS Shows status of hard drive, recording, alarm, HDD full and network.

4 CHANNEL/NUMBER

S/ PLAYBACK

Press buttons 1-8 to view the selected channel full-screen; press buttons 1-0 to input

passwords and user IDs.

5 MENU

EXIT Press to open/close the main menu.

6 NAVIGATION/OK

In menus, press to confirm selections; in PTZ mode, press to

change the navigation buttons to control a connected PTZ camera

(not included)

ARROW Press to move cursor up; in PTZ mode, press to pan camera up.

DOWN

ARROW Press to move cursor down; in PTZ mode, press to pan camera down.

LEFT

ARROW Press to move cursor left; in PTZ mode, press to pan camera left.

RIGHT

ARROW Press to move cursor right; in PTZ mode, press to pan camera right.

7 Connect a USB flash drive to the top port for data backup and firmware upgrades

connect a USB mouse to the bottom port.

8 DURING

PLAYBACK PRESS:

Increase reverse playback speed 1X, 2X, 4X.

Press to freeze playback to one frame, then press again to

advance frame-by-frame.

Press to start playback

Press to slow playback speed by 1/2, 1/4, 1/8.

Press to increase forward playback speed 1X, 2X, 4X, 8X.

Q-SEE QUICK INSTALLATION GUIDE

-4

5 | Page

PART 6 - ACCESSING THE DVR MENUS

PART 7 - SETTING UP CAMERAS

FOR VIEWING AND RECORDING

PART 8 - TO START RECORDING

Using higher quality settings results in better video quality, but takes up more space on the hard drive. Choosing

lower settings result in lower video quality, but takes up less space on the hard drive.

AUDIO: If audio is ENABLED sound will be recorded with the video from the channels, and will have audio output in

playback mode. If audio is DISABLED, sound will not record, and there will be no audio output in playback mode

(Audio cameras or a microphone is required to record the sound).

REC MODE: select POWER UP or TIMER RECORD. If you select POWER UP, the system will record continuously

(Normal Recording) when the system is powered on. If you select TIMER RECORD, you have to set a recording

schedule on the system.

REC SIZE:Choose the time length of all recorded files: 15, 30, 45, 60 min. (Max = 60 min)

MASK FIELD SETUP: lets you block a specific portion of a channel you do not want recorded or shown on the display screen.

This can be useful if you need to conceal a sensitive area being captured by the installed camera.

Choose MENU by right clicking on the mouse or by pushing the MENU button

on the DVR front panel or remote control.

The Main Menu offers the following Setup Features:

SEARCH: Search for recorded video on the system.

RECORD: Enable recording & audio, set resolution & quality, recording mode

and file size.

HDD: Display hard drive status and format the internal hard drive of the

system.

BASIC

: Open the Basic Setup Menu, which lets you set the system

language, date and time, Device IDs and passwords, and configure audio

and video settings.

ADVANCE

: Opens the Advanced Setup Menu, which lets you view

system info, configure alarm, PTZ, mobile, and network settings.

EXIT: Closes the Main Menu.

From the Main menu, select BASIC then DISPLAY. Here you can setup the

name display (up to 8 characters) and position of each channel (cameras).

Select COLOR SETUP to adjust the image brightness, saturation, contrast and

hue settings for each channel (camera). You can also choose whether each

channel can be previewed in LIVE MODE and/or RECORDING MODE.

This System offers 3 modes for recording:

1. Manual 2. Time Schedule 3. Motion Detection.

From the main menu, select RECORD to enter into the

Record Setup menu (shown on the left).

CHANNEL:

“ON” enables video to record from the

respective camera. If the channel is set to “OFF”, video

from that channel will not record.

QUALITY: Best, Good, Normal

Q-SEE QUICK INSTALLATION GUIDE

-4

6 | Page

Manual Recording:

From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be

created with the Pack Time intervals you selected.

Time Schedule Recording:

From the Record Setup screen, set the Rec Mode to TIMER RECORD and click “SCHEDULE”. This will display the

Schedule menu (see image above). Select the channels (cameras) that you wish to record on a schedule. The options

are: CH-1 through CH-8, and ALL. Click on the green GENERAL option box then click on the boxes for the days and times

that you want to record using this option on the timeline. You can use the [From – To] pull-down menus and COPY

button to copy settings from one day to another day, or all days. Your DVR will record on it’s Time Schedule, and

separate files with the Pack Time Interval you selected. Click APPLY to activate your customized schedule, and then

reboot the DVR.

Motion Detection Recording:

From the Record Setup screen, set the Rec Mode to TIMER RECORD and click “SCHEDULE”. This will display the Schedule

menu (See picture above). The options are: CH-1 through CH-8, and ALL. Click on the red ALARM option box then click on

the boxes for the days and times that you want to record using this option on the timeline. You can use the [From – To]

pull-down menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on

Motion Detection. Click APPLY to activate your customized schedule, and then go to the Devices option (red box in first

below picture) and select the Motion Option (red box in second picture below), which will display the Motion Detect Box.

Grid Explanation:

Red = Alarm (motion detection) recording

Green = General (time schedule) recording

Transparent = No recording

Blue = The channel and date selected.

Q-SEE QUICK INSTALLATION GUIDE

-4

7 | Page

PART 9 - SETTING UP THE DVR TO PLAYBACK

In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow play at 1/2x, 1/4x, and 1/8x, or normal

play, pause and play frame by frame using the playback control bar, and adjust volume by clicking or sliding tune control

bar. When playback has finished, system will return to previous menu.

The Motion Detection Menu has 3 sections, including

Channel Status, Sensitivity and Motion Area.

Status: This option allows you to enable motion

detection on any channel.

Sensitivity: This option allows you to set sensitivity

level of motion detection from 1 to 4, with 4 being the

highest.

MD Area: Allows you to set the area of the camera

view that you want to be sensitive to motion.

Next, click on the MD AREA SETUP button, which will display

the picture on the left. This option allows you to select the area

you want to be sensitive to motion. You can set this area by

using the mouse or REV, FWD, and SEL keys on the front panel.

Once you have set the area, right click with the mouse or push

the ESC key key to save the setting. After you have set all of the

cameras, click on the Apply button to save the settings.

Searched Playback:

From the Main Menu select SEARCH to display the Video

Search Menu shown to the right. If you input a specific

date and click Search, you will find all the recordings for

that day. When you select an item, you will playback the

recordings in 4 channel mode; or, click [File list] button

to display File list interface, where you can playback or

backup the file you selected. See File List heading below.

Q-SEE QUICK INSTALLATION GUIDE

-4

8 | Page

PART 10 - BACKING UP THE VIDEO ON THE DVR

Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 9 to go to the File List

in the Search menu.

If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the file you

wish to back up by placing a check mark in the BAK box and hit the [BACKUP] button on bottom of the screen. You will then

receive a pop up screen as illustrated below showing you the progression of your backup. Once backup is complete, you will

then receive a pop up message informing you that you have backed up your files successfully. Note that all files will be in an

H264 format that can be converted to AVI using the playback software that comes with the DVR or through the remote

viewer program. Once converted, you can then view these files through any program that supports an AVI format.

File List:

On the Search Menu click the Search button then click File list to display the

sub-menu shown in the picture on the left.

This option will allow you to view all of the available files by channel and type

(all, normal, or alarm).

You can click on a file to playback the file.

Use the buttons on the side panel to navigate the file list:

FIRST: Jump to the first page of the list

PRE: Turn to the previous page

NEXT: Turn to the next page

LAST: Jump to the last page of the list

ALL: Select all files

OTHER: Clear all files

BACKUP: After selecting a file(s), click to begin copying the data to a USB

flash drive (not included)

Q-SEE QUICK INSTALLATION GUIDE

-4

9 | Page

Questions or Comments?

Mailing Address: Customer Service:

DPS, Inc. Phone: 877-998-3440 x 538

8015 E. Crystal Dr. Email: cs@dpsi-usa.com

Anaheim, CA 92807 Live Chat from our Website

Website: Tech Support:

http://www.q-see.com Phone: 877-998-3440 x 539

Fax: Email: ts@dpsi-usa.com

714-998-3509 Live Chat from our Website

REVISED 9/23/2010

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Q-See Sicherheitssystem Handbücher

Q-See

Q-See QSD6209C9--250 Bedienungsanleitung

Q-See

Q-See QR4074-411 Bedienungsanleitung

Q-See

Q-See QT528-435 Bedienungsanleitung

Q-See

Q-See Premium QC5416-16E3-1 Bedienungsanleitung

Q-See

Q-See QS458-811-5 Bedienungsanleitung

Q-See

Q-See QR4274-418 Bedienungsanleitung

Q-See

Q-See Home Security System Bedienungsanleitung

Q-See

Q-See QSDT304C2 Bedienungsanleitung

Q-See

Q-See QR424-403 Bedienungsanleitung

Q-See

Q-See QC444-403 Bedienungsanleitung

Q-See

Q-See QT4760-16A6-5 Bedienungsanleitung

Q-See

Q-See Q25DVR4ES Bedienungsanleitung

Q-See

Q-See QR4074-426 Bedienungsanleitung

Q-See

Q-See QC40198 Bedienungsanleitung

Q-See

Q-See QR4174-411 Bedienungsanleitung

Q-See

Q-See WR414-411 Bedienungsanleitung

Q-See

Q-See QC40198 Bedienungsanleitung

Q-See

Q-See QS SERIES Bedienungsanleitung

Q-See

Q-See QC804-261-1 NVR Bedienungsanleitung

Q-See

Q-See QC308 Bedienungsanleitung

Q-See

Q-See Premium QC308-8E4 Bedienungsanleitung

Q-See

Q-See QC40196-833 Bedienungsanleitung

Q-See

Q-See QC5416 Bedienungsanleitung

Q-See

Q-See QC40198 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung