Q-See QSD004C4-250 Bedienungsanleitung

INDEX

1. DVR Features....................................................................... 1

2. Layout

2.1 Front Panel...............................................................................................1

2.2 Rear Panel................................................................................................2

2.3 Remote Control.....................................................................................2

3. Installation

3.1 Installing the Hard Drive..................................................................3

3.2 Connecting Camera and Monitor.................................................3

3.3 Connecting Power Supply…………………………..…..3

4. System Boot

4.1 Detecting Installed Hard Drive.....................................................4

4.2 Recovering Lost Data........................................................................4

4.3 Restore Recording Feature..............................................................4

4.4 Main Screen............................................................................................5

5. DVR Setup

5.1 Setup Menu.............................................................................................5

5.2 Camera Select........................................................................................6

5.3 Record Select.........................................................................................6

5.4 Resolution................................................................................................7

5.5 Record Frame Rate..............................................................................7

5.6 Record Quality ......................................................................................8

5.7 Schedule Set............................................................................................8

5.8 Miscellaneous Menu - Auto Record................................ 9

5.9 Miscellaneous Menu - Password Enable......................... 9

5.10 Miscellaneous Menu – Change Password....................... 9

5.11 Miscellaneous Menu - Color Set..................................... 9

5.12 Miscellaneous Menu - Time Set.................................... 10

5.13 Hard Disk Setup..................................................................................10

5.14 Motion Setup........................................................................................11

5.15 Video Mode...........................................................................................12

5.16 Factory Reset........................................................................................12

6. Recording

6.1 Start Recording....................................................................................12

6.2 Stop Recording....................................................................................13

6.3 Recording Time on Hard Drive..................................................13

7. Playback.............................................................................. 14

8. USB Programming............................................................. 15

8.1 PC Viewer Program........................................................ 15

8.2 Program Buttons ............................................................ 15

8.3 PC Backup..............................................................................................16

9. Specifications...................................................................... 17

10. Appendix

10.1 System Connection Diagram.........................................18

10.2 DVR Accessories (included)......................................... 19

Q-SEE Product Warranty.......................................................... 19

- 1 -

QSD004C4-250 User’s Manual

z4 Channel BNC Camera Input

z1 Channel BNC Video Output

zVideo Source Option: NTSC / PAL

zMotion Detection with Sensitivity and Area Settings

zTime Schedule Recording / Motion Triggered Recording

zOne ATA-100 Hard Drive Interface

zUSB 2.0 Back up to computer

zRemote Control

2.1 Front Panel

CH1 #1 Channel #1 Stop #10 Stop recording / playing

CH2 #2 Channel #2 REC #11 Record

CH3 #3 Channel #3 Menu/Esc #12 Enter / exit setup menu

CH4 #4 Channel #4 SEL/Edit #13 Select / modify item

Quad #5 Quad View Up #14 Move up / left cursor

REW #6 Rewind Down #15 Move down / right cursor

Pause #7 Pause PWR #16 Power indicator LED

Play #8 Play recorded video HDD #17 Hard drive indicator LED

FWD #9 Forward

IR Receiver

Chapter 1: DVR Features

Chapter 2: Layout

- 2 -

QSD004C4-250 User’s Manual

2.2 Rear Panel

USB Port is located on the right side of the case.

2.3 Remote Control

CH1 Select or enlarge Channel #1

CH2 Select or enlarge Channel #2

CH3 Select or enlarge Channel #3

CH4 Select or enlarge Channel #4

Quad Quad View

Rewind

Play recording list

Forward

Record

Pause

Stop recording / playing back

Menu Enter or exit setup menu

Move up / left cursor

SEL Select / modify item

Move down / right cursor

Power Supply Input Grounding Terminal

4 BNC video inputs

1 BNC video output

Fan

- 3 -

QSD004C4-250 User’s Manual

3.1 Installing Hard Drive

Note: This model comes with a 250GB Hard Drive already installed, so

this would only be necessary if you are replacing the hard drive.

1. Unplug the power supply. Don’t install or uninstall HDD when DVR is on!!

2. Carefully open the DVR case.

3. Connect the power cord and data cable to hard disk drive.

The 4 pin connection is the DC power cable for HDD, and the wider cable is the standard

hard drive IDE type connection.

Make sure the HDD is set as MASTER according to the hard drive manual.

4. Carefully replace the case cover.

Cha

ter 3: Installation

(

tional

)

3.2 Connecting Camera and Monitor

There are 4 camera inputs and 1 video output with BNC connectors (Refer to

2.2 Rear Panel). Attach the cable from each of the cameras to one of the BNC video

input ports. Attach a RCA video cable (not included) to the video out put port on the

DVR using a RCA to BNC adapter (included) and to a RCA video in port on the TV.

3.3 Connecting Power Supply

Please only use the power adapter supplied with the DVR. The standard power

supplied to the DVR is DC 12 Volts, 3Amps.

- 4 -

QSD004C4-250 User’s Manual

Chapter 4: System Boot

4.1 Detecting Installed Hard Drive

4.2 Recovering Lost Data

4.3 Restore Recording Feature

Checking HDD ……

MASTER…

RECOVER HDD?

04811-101735

(SELECT)YES/(MENU)NO

Power Error Detected

Restore Hard Disk (Master) OK

Restore REC Mode…………OK

After connecting the power, the system will

boot-up and detect the installed hard drive.

On the screen it will show the hard drive

information.

A power error can cause data to be lost, the

DVR system can automatically recover lost

data after power is reconnected.

If a power error occurs during the

recording process, the system will

automatically resume recording after

power is reconnected.

- 5 -

QSD004C4-250 User’s Manual

4.4 Main Screen

5.1 Setup Menu

Menu Directory

CAMERA SELECT

RECORD SELECT

RESOLUTION

RECORD FRAME

RECORD QUALITY

SCHEDULE SET

MISCELLANEOUS MENU

HARD DISK SET

MOTION SET

Chapter 5: DVR Setup

AUTO RECORD

PASSWORD ENABLE

PASSWORD CHANGE

COLOR SET

TIME SET

While the DVR is running, the monitor

will display the information from the

cameras as follows:

Upper left: Percentage of space used on

hard drive.

Middle: Channel number (CH1 through

CH4)

Bottom right: Date and Time

Bottom left: System status. (Refer to 6.1

Start Recording)

＞

VIDEO MODE

FACTORY RESET

MAIN

- 6 -

QSD004C4-250 User’s Manual

[Menu]: enter system menu

Note: If you are recording to enter

Menu you need to push stop button to

stop recording first.

[Up] and [ Down]: move the cursor

[SEL]: select/modify settings

[Menu]: press again to exit

MAIN MENU

CAMERASELECT 1234

RECORDSELECT 1234

RESOLUTION EACH

RECORDFRAME 25

RECORDQUALITY HIGH

SCHEDULE SET

MISCELLANEOUS MENU

HARD DISK SET

MOTION SET

VIDEOMODE PAL

FACTORY RESET

PRESS (UP，DOWN), ENTER (SELECT)

PRESS (MENU) TO EXIT

5.2 Camera Select

The DVR system can display 4 camera

feeds in one picture (Quad Mode).

You can configure which cameras are

displayed.

Press [ SEL] to modify setting, or press

[CH1], [CH2], [CH3] and [CH4] to

select each channel separately.

If a channel is disabled, the system will display “OFF” on the monitor, and this

channel will not be selected to record. (Refer to 5.3 Record Select)

5.3 Record Select

Configure which channels you want to record.

Note: If no channels are selected, an error message will appear briefly on

the screen when record is selected.

- 7 -

QSD004C4-250 User’s Manual

5.4 Resolution

There are two resolutions for video recording:

EACH Mode:

The DVR compresses and records each video channel separately so you can

enlarge a single channel to full screen display and still be recording on all channels.

You can also record on specific channels, for example, you can turn off the

recording function of CH1 and CH2 and then the system will only record video on

CH3 and CH4.

Press [CH1], [CH2], [CH3], and [CH4] to enlarge relative channel to full

screen display.

In EACH Mode you can use the Auto Switch Function.

Auto Switch Function:

When the system is in live mode or recording mode, press the [QUAD] button

and hold for three (3) seconds to make each video channel enlarge to full screen in

sequence.

The full screen view of each channel will be displayed for three (3) seconds,

including Quad view.

The switch will last until any button is pushed.

For example, [ Stop] will stop the switch and may stop the recording

depending on Record Schedule Settings (5.7 Schedule Set).

QUAD Mode:

The DVR will compress and record all 4 video channels into one file, therefore,

you cannot enlarge a single channel to full screen in play back mode or live

monitoring mode.

Auto Switch Function is not available in QUAD Mode.

5.5 Record Frame Rate

Record frame rate will affect the movement of objects in recorded video. More

frames per second gives smoother movement and uses more hard drive space.

System default value is 30fps (frames per second) for NTSC (PAL is 25fps),

which means the system will record 30 frames per second shared by all cameras.

You can set frame rate for NTSC to 30,15,10,7,5,4,3,2,1 frames per second (PAL is

25,12,8,6,4,3,2,1)

Inhaltsverzeichnis

Andere Q-See Sicherheitssystem Handbücher

Q-See

Q-See QR4174-418 Bedienungsanleitung

Q-See

Q-See qr404-411 Bedienungsanleitung

Q-See

Q-See QT548-841-5 Bedienungs- und Sicherheitshinweise

Q-See

Q-See QC444-403 Bedienungsanleitung

Q-See

Q-See QS458-811-5 Bedienungsanleitung

Q-See

Q-See QT17DVR4C Bedienungsanleitung

Q-See

Q-See Presidio Series Bedienungsanleitung

Q-See

Q-See QSDL506W Bedienungsanleitung

Q-See

Q-See Home Security System Bedienungsanleitung

Q-See

Q-See QR414-430 Bedienungsanleitung

Q-See

Q-See QSD2304C4-250 Bedienungsanleitung

Q-See

Q-See QSDL503AD Bedienungsanleitung

Q-See

Q-See QC9416-16V2 Bedienungsanleitung

Q-See

Q-See QM14QD4B Bedienungsanleitung

Q-See

Q-See QC308 Bedienungsanleitung

Q-See

Q-See QSDT304C2 Bedienungsanleitung

Q-See

Q-See QT4760-16A6-5 Bedienungsanleitung

Q-See

Q-See QH50DVR8C Bedienungsanleitung

Q-See

Q-See QS218-411 Bedienungsanleitung

Q-See

Q-See QR4274-418 Bedienungsanleitung

Q-See

Q-See QT528-435 Bedienungsanleitung

Q-See

Q-See QR40198-403 Bedienungsanleitung

Q-See

Q-See Premium QC308-8E4 Bedienungsanleitung

Q-See

Q-See QC40198 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung