QDI Advance 6T Bedienungsanleitung

Declaration of Conformity

QUANTUMDESIGNS(HK)LTD.

20th Floor, Devon House, Taikoo Place, 979 King’s Road,

Quarry Bay, Hong Kong

declares that the product

Motherboard

Advance 6T

is in conformity with

(reference to the specification under which conformity is declared in

accordance with 89/336 EEC-EMC Directive

!"EN 55022 Limits and methods of measurements of radio disturbance

characteristics of information technology equipment

!"EN 50081-1 Generic emission standard art 1:

Residential, commercial and light industry

!"EN 50082-1 Generic immunity standard art 1:

Residential, commercial and light industry

European Representative:

QDI COM UTER( UK ) LTD. QDI COM UTER( SCANDINAVIA )A/S

QDI SYSTEM HANDEL GMBH QDI EURO E B.V

QDI COM UTER( FRANCE ) SARL QDI COM UTER HANDELS GMBH

LEGEND QDI S AIN S.L QDI COM UTER( SWEDEN )AB

Signature : lace / Date : HONG KONG/2001

rinted Name : Xu Wenge osition/ Title : Assistant resident

Declaration of Conformity

Trade Name: QDI Computer ( U. S . A. Inc.

Model Name: Advance 6T

Responsible Party: QDI Computer ( U. S. A. Inc.

Address: 41456 Christy Street

Fremont, CA 94538

Telephone: (510 668-4933

Facsimile: (510 668-4966

Equipment Classification: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer:Quantum Designs (HK) Inc.

Address: 20th Floor, Devon House, Taikoo Place

979 Kings Road, Quarry Bay, HONG

KONG

Supplementary Information:

This device complies with Part 15 of the FCC Rules. peration is subject to

the following two conditions : (1) this device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Tested to comply with FCC standards.

Signature : Date : 2001

1. Introduction...........................................1

Overview........................................................................ 1

Key Features.................................................................. 1

2. Installation Instructions......................... 4

ExternalConnectors.................................................4

PS/2 Keyboard & PS/2 Mouse Connectors.....................4

USB1 USB2 and LAN Connectors( optional )................ 4

Parallel Port Connector and Serial Port Connector

( UART1 )Monitor Output Connector(VGA).................... 4

Line-in jack Microphone-in jack Speaker-out jack and

MIDI/Joystick Connector.................................................. 5

USB3 USB4 Connectors................................................ 5

Serial Port Connector( UART2 ) ......................................5

Fan Connectors(CPUFAN CHSFAN BAKFAN)............. 6

Internal Audio Connectors (CD_IN MODEM)...................6

ATX Power Supply Connector & Power Switch.............7

Hard Disk LED Connector (HD_LED) ..............................7

Reset Switch (RESET)....................................................7

Speaker Connector (SPEAKER)......................................7

Power LED Connector(PWR_LED) ................................ 7

ACPI LED Connector(ACPI LED)......................................7

Green LED Connector (GREEN LED)............................. 8

Hardware Green Connector (SLEEP).............................8

Audio/Modem Riser Slot(AMR)........................................8

Wake-Up On LAN (WOL) ............................................. 9

Wake-Up On Internal Modem (WOM).............................. 9

Audio Interface(Reserved).............................................10

JumperSettings........................................................ 11

Enable Front/Back Panel USB Device Wake-up

Function (JUSB1 JUSB2)................................................ 11

FSB Frequency Selection(JFSB1 JFSB2)......................12

Overclocking Jumper Setting(JCLK1 JCLK2)................. 13

CONTENTSCONTENTS

CONTENTS

CPU Bus Ratio Selection(JX1 JX2 JX3 JX4)................ 14

Enable/Disable On-board audio(JSD)............................. 15

Clear CMOS(JCC)........................................................... 15

BIOS-ProtectEasy Jumper(JAV)......................................16

Enable/Disable On-board LAN( J3 )( optional )................16

3. BIOS Description....................................17

UtilitySupport............................................................. 17

AWDFLASH.EXE.............................................................17

AWARD BIOSDescription........................................18

Entering Setup................................................................ 18

Load Optimized Defaults.................................................18

Standard CMOS Features Setup.....................................18

Advanced BIOS Features Setup.....................................22

Advanced Chipset Features Setup.................................24

Power Management Setup ............................................26

PNP/PCI Configurations Setup.........................................29

Integrated Peripherals ..................................................30

PC Health Status..............................................................32

Supervisor/User Password............................................33

Appendix

QDI Driver CD 2000....................................................34

QDI ManageEasy............................................................ 35

BIOS-ProtectEasy........................................................... 35

Norton AntiVirus............................................................. 35

LogoEasy......................................................................36

RecoveryEasy................................................................ 37

QDI BootEasy.................................................................. 45

New Features.................................................................49

Advance 6T (French)..................................................... 50

Layout

CONTENTSCONTENTS

CONTENTS

Manual for Advance 6T series

Chapter 1

Introduction

Overview

The Advance 6T series are high performance cost-effective and energy efficient mainboards

from 66MHz 100MHz and 133MHz based on Socket-370 processors. The green mainboard

utilizes the VIA Apollo PLE133T chipset consisting of the VIA VT8601T( North Bridge ) and

the VIA VT82C686B( South Bridge ). The chipset integrates AGP 2D/3D graphics accelera-

tor to provide high graphics performance. It supports the UltraDMA 33/66/100 IDE PC100/

PC133 SDRAM and AC97 audio. In addition advanced features are supported such as

wake-up on LAN wake-up on internal/external modem ACPI power management and hard-

ware monitoring.ManageEasy our system management application is also supplied to

enable remote monitoring and configuration of the system. BootEasy lets the PC boot

freely and rapidly.

Key Features

Form Factor

#"mATX form factor of 244mm x210mm

Microprocessor

#"Supports 66/100/133MHz FSB speed

#"Supports all Intel® Pentium III(Coppermine) FC-PGA processors at 600EB/667/733/

800EB/866/933MHz/1GHz and future processors with 133MHz FSB speed

#"Supports all Intel® Pentium III(Coppermine) FC-PGA processors at 500/550/600/650/

700/750/800/850MHz and future processors with 100MHz FSB speed

#"Supports all Intel® Celeron FC-PGA processors at 533/566/600/633/667/700/733/

766MHz and future processors with 66MHz FSB speed

#"Supports all Intel® Celeron FC-PGA processors at 800/850/900/950MHz and future

processors with 100MHz FSB speed

#"Supports all Intel® Tualatin Pentium® III/ CeleronTM

FC-PGA2 processors at 1.13/1.20/

1.26GHz and future processors

#"Supports VIA C3(Samuel 2) 700/733/750/800MHz and future processors

Chipset

#"VIA Apollo PLE133T chipset: VT8601T VT82C686B

Memory

#" Provides two 168-pin 3.3V unbuffered 100/133MHz DIMM sockets

#"Supports PC100/PC133 SDRAM

Manual for Advance 6T series

Introduction

Onboard IDE

#" Supports two PCI PIO and Bus Master IDE ports

#""

"Two fast IDE interfaces supporting up to four IDE devices including IDE hard disks

and CDROM drives

#""

"Supports up to mode 4 timing

#""

"Supports Ultra DMA33/66/100

Onboard I/O

#""

"One floppy port supporting up to two 3.5 or 5.25 floppy drives with 360K/720K/

1.2M/1.44M/2.88M format

#""

"Two high speed 16550 fast compatible UARTs(COM1/COM2/COM3/COM4

selective) with 16-byte transmit/receiver FIFOs(UART2 is optional)

#""

"One enabled parallel port at the I/O address 378H/278H/3BCH with additional

bidirection I/O capability and multi-mode as SPP/EPP/ECP (IEEE 1284 compliant)

#""

"Supports PS/2 mouse and PS/2 keyboard

#""

"Provides four USB ports

#""

"Supports LS-120 floppy disk drive and Zip drive

#""

"All I/O ports can be enabled/disabled in the BIOS setup

OnboardAudio

#""

"Standard AC97 Codec interface

OnboardAGP

#""

"Supports AGP 4x

#""

"Integrated 2D/3D Graphics Controller

#""

"Supports 2~ 8Mbytes of Frame Buffer

Onboard LAN( optional )

#""

"Provides One 10/100M LAN interface

#""

"10/100 Mbit/sec Ethernet support

Advanced Features

#""

"PCI- 2.2 compliant

#""

"Provides Trend ChipAwayVirus® On Guard

#""

"Supports wake-up on LAN

#""

"Supports wake-up on internal/external modem

#""

"Supports system monitoring (monitors system temperature CPU temperature voltages

and fan speed)

Manual for Advance 6T series

Chapter 1

#Supports QDI innovations: BootEasy LogoEasy RecoveryEasy BIOS-ProtectEasy

and ManageEasy

#Protects the system BIOS from being attacked by severe virus such as CIH by

enabling Flash Write Protect in CMOS setup or closing the Jumper JAV

BIOS

#Licensed advanced AWARD( Phoenix ) BIOS

#""

" Supports Flash ROM with 2M-bit memory size plug and play ready

#Supports IDE CDROM or SCSI bootup

Green Function

#""

" Supports ACPI (Advanced Configuration and Power Interface) and ODPM (OS

Directed Power Management)

#" Supports ACPI power status: S0( Full-on ) S1( Suspend ) S4(STD suspend

to Disk)(depending on OS ) S5(Soft-off)

Main Expansion Slots and Connectors

Slot/Port (Quantity) Description

PCI( 3 ) PCI slots

ISA( 1 ) ISA slot

IDE( 2 ) IDE ports

FLOPPY( 1 ) Floppy Drive port

DIMM( 2 ) DIMM sockets

USB( 4 ) USB connectors

VGA( 1 ) VGA connector

PARALLEL( 1 ) Parallel connector

AMR( 1 ) AMR slot

MIDI/Joystick( 1 ) MIDI/Joystick connector

Manual for Advance 6T series

-- T is page is intentionally left blank--

Manual for Advance 6T series

Chapter 2

Installation Instructions

This section covers External Connectors and Jumper Settings. Refer to the motherboard

layout chart for the locations of all jumpers external connectors slots and I/O ports.

Furthermore this section lists all necessary connector pin assignments for your reference.

The particular states of the jumpers connectors and ports are illustrated in the following

figures. Before setting the jumpers or inserting these connectors please pay attention to

the directions.

Be sure to unplug the AC power supply before adding or removing expansion

cards or other system peripherals, otherwise your motherboard and expan-

sion cards might be seriously damaged.

External Connectors

PS/2 Keyboard Connector, PS/2 Mouse Connector

PS/2 keyboard connector is for the usage of PS/2 keyboard. If using a standard AT size

keyboard an adapter should be used to fit this connector. PS/2 mouse connector is for the

usage of PS/2 mouse.

USB1, USB2 and LAN Connectors( LAN Connector is optional )

Two USB ports are for connecting USB devices. The RJ-45 connector is for onboard LAN.

Parallel Port, Serial Port Connector( UART1 ), Monitor Output Connec-

tor( VGA )

The parallel port connector can be connected to a parallel device such as a printer. The

serial port UART1 connector can be connected to a serial port device such as a serial port

mouse. The VGA connector is for output to a VGA-compatible device. You can enable/

disable them and choose the IRQ or I/O address in INTEGRATED PERIPHERALS in AWARD

BIOS SETUP.

Chapter 2

PS/2 Mouse Connector

PS/2 Keyboard Connector

USB1

USB2

LAN(optional)

L NK ACT VE

Parallel Port

UART1 VGA

Manual for Advance 6T series

Line-in jack, Microphone-in jack, Speaker-out jack and

MIDI/Joystick Connector

The Line-in jack can be connected to devices such as a cassette or minidisc player for

playback or recording. The Microphone-in jack can be connected to a microphone for voice

input. The Speaker-out jack allows you to connect speakers or headphones for audio

output from the internal amplifier.

The MIDI/Joystick connector allows you to connect a game joystick or a MIDI device.

USB3, USB4Connector

Besides USB1 2 on the back panel the mainboard also have a 10-pin header on board which

may connect to a front panel USB cable to provide additional two USB ports.

Serial Port Connector( UART2 )(optional)

Besides UART1 on the back panel the mainboard also have a header on board which may

connect to a cable to provide an additional UART port.

Installation Instruction

MIDI/Joystick

Speaker out Line in Microphone in

+5v

D3-

D3+

GND

D4+

D4-

+5v

USB3,4

UART2

Andere Handbücher für Advance 6T

Inhaltsverzeichnis

Andere QDI Hauptplatine Handbücher

QDI

QDI P5I430TX Titanium IB+ Bedienungsanleitung

QDI

QDI PlatiniX 2E/333 Bedienungsanleitung

QDI

QDI P6I440LX/L6 Bedienungsanleitung

QDI

QDI Advance 5/133E Bedienungsanleitung

QDI

QDI Advance 10T Series Bedienungsanleitung

QDI

QDI Advance 10TM Bedienungsanleitung

QDI

QDI PlatiniX 2E/333 Bedienungsanleitung

QDI

QDI P5I865PE Bedienungsanleitung

QDI

QDI KinetiZ 7T Bedienungsanleitung

QDI

QDI PlatiniX 1D Series Bedienungsanleitung

QDI

QDI Brilliant IV Bedienungsanleitung

QDI

QDI SynactiX 2EP Bedienungsanleitung

QDI

QDI Advance 12 Series Bedienungsanleitung

QDI

QDI KinetiZ 7E Bedienungsanleitung

QDI

QDI CenturieX 2 Bedienungsanleitung

QDI

QDI LEGEND-V Bedienungsanleitung

QDI

QDI P6I440BX/B1S Bedienungsanleitung

QDI

QDI ZillioX 9 Bedienungsanleitung

QDI

QDI K7VM400M Pro Series Bedienungsanleitung

QDI

QDI WinneX 3 Bedienungsanleitung

QDI

QDI Superb 4 Series Bedienungsanleitung

QDI

QDI Superb 4L Bedienungsanleitung

QDI

QDI P51437/250a Bedienungsanleitung

QDI

QDI PENTIUM II P6I440EX/ATX EXCELLENT 1 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung