QDI PlatiniX 2D Bedienungsanleitung
Declaration of Conformity
QUANTUM DESIGNS(HK) LTD.
20th Floor, Devon Hou e, Taikoo Place, 979 King Road,
Quarry Bay, Hong Kong
declares that the product
Mainboard
PlatiniX 2D
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive
!"EN 55022 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
!"EN 50081-1 Generic emission standard art 1:
Residential, commercial and light industry
!"EN 50082-1 Generic immunity standard art 1:
Residential, commercial and light industry
European Representative:
QDI COM UTER( UK ) LTD. QDI COM UTER( SCANDINAVIA )A/S
QDI SYSTEM HANDEL GMBH QDI EURO E B.V
QDI COM UTER( FRANCE ) SARL QDI COM UTER HANDELS GMBH
LEGEND QDI S AIN S.L. QDI COM UTER( SWEDEN )AB
Signature : lace / Date : HONG KONG/2001
rinted Name : Xu Wenge osition/ Title : Assistant resident
Declaration of Conformity
Trade Name: QDI Computer ( U. S . A. Inc.
Model Name: PlatiniX 2D
Responsible Party: QDI Computer ( U. S. A. Inc.
Address: 41456 Christy Street
Fremont, CA 94538
Telephone: (510 668-4933
Facsimile: (510 668-4966
Equipment Classification: FCC Class B Subassembly
Type of Product: Motherboard
Manufacturer:Quantum Designs (HK) Inc.
Address: 20th Floor, Devon House, Taikoo Place
979 Kings Road, Quarry Bay, HONG
KONG
Supplementary Information:
This device complies with Part 15 of the FCC Rules. peration is subject
to the following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2001
II
CONTENTSCONTENTS
CONTENTSCONTENTS
CONTENTS
1. Introduction ............................................... 1
Overview ........................................................................ 1
Key Features .................................................................. 1
2. In tallation In truction ............................. 4
External Connectors .............................................. 4
PS/2 Keyboard /Mouse Connector ................................... 4
USB1, USB2 and AN Connectors ................................... 4
Parallel Port, Serial Port Connectors................................... 5
ine-in jack, Mic-in jack, Speaker-out jack and
MIDI/Joystick Connector........................... .... ......................5
Chassis Security Switch(CHSSEC).....................................5
ATX 12V Power Supply Connectors & Power Switch ...... 6
Hard Disk ED Connector ( HD_ ED ) ............................... 6
Reset Switch ( RESET ) ................................................... 6
Speaker Connector ( SPEAKER ) ..................................... 7
Power ED Connector( PWR_ ED ) ................................. 7
Green ED Connector( GREEN_ ED ) .............................. 7
ACPI ED Connector( ACPI_ ED ) .................................... 7
Hardware Green Connector ( S EEP SW ) ...................... 7
Key ock Connector( KEY K ) ........................................ 7
USB3, 4 Connector .......................................................... 8
Infrared Header ( IrDA ) ................................................... 8
Sound Connector( PC-PCI ) .............................................. 8
Fan Connectors( CPUFAN , CHSFAN, PWRFAN ) .............. 9
Intruder Detect Switch( JINTR ) ........................................ 9
Wake-Up On AN ( WO ) ................................................10
Wake-Up On Internal Modem ( WOM )................................10
Audio Connectors ( AUXIN, CD_IN, MODEM ).....................11
4-pin SMBus Connector( SMBUS ).....................................11
Diagnosis ED ....................................................................12
Communication and Networking Riser Slot( CNR )..............12
Audio Interface...................................................................13
Main Expqnsion slot and Connectors.........................13
Jumper Settings......................................... ..................14
BIOS-Protection Jumper( JAV )................. .........................14
Overclocking Jumper Setting( JFS0,JFS1 ).........................15
II
CONTENTSCONTENTS
CONTENTSCONTENTS
CONTENTS
Clear CMOS(JCC)..................................................16
CPU Core Voltage Setting( JVID0~4 ).....................16
Enable Front/Back Panel USB Device
Wake-up Function( JUSB, JFUSB )........................18
Enable/Disable onboard Audio( JSD )....................18
Enable keyboard password power-on
function(JKB).........................................................19
3. BIOS De cription.............................20
Utility Support.....................................................20
AWDF ASH.EXE ....................................................20
AWARD IOS Description...............................21
Entering Setup .......................................................21
oad Optimized Defaults .......................................21
Standard CMOS Features Setup............................21
CPU SpeedEasyII Setup..........................................25
Advanced BIOS Features Setup............................26
Advanced Chipset Features Setup........................28
Power Management Setup.....................................30
PnP/PCI Configurations Setup.................................33
Integrated Peripherals.............................................34
PC Health Status.....................................................37
Password Setting...................................................39
Boot with BIOS defaults.........................................39
Appendix...........................................................40
DI Driver CD......................................................40
ManageEasy........................................................41
BIOS-ProtectEasy...............................................41
Norton AntiVirus..................................................41
LogoEasyII...........................................................42
BootEasy..............................................................43
RecoveryEasy......................................................46
StepEasyII............................................................54
SpeedEasyII........................................................56
Platinix2D(French).............................................58
Platinix2D(Spanish)............................................62
Layout
Manual for latiniX 2D series
Chapter 1
Chapter 1
Introduction
Overview
PlatiniX 2D series of mainboards utilize Intel® 845DDR chipset consisting of two compo-
nents: the Intel® i845DDR Memory Controller Hub(Brookdale MCH) and the 82801BA I/O
Controller Hub2(ICH2), providing a fully compatible, high performance and cost-effective
PC/ATX platform. The new integrated technologies, together with AGP 4X support, AC97
audio, integrated AN(optional), 4 USB ports, and ATA66/100/33, give customers an
advanced, multimedia solution at reasonable price. It provides 400MHz host bus speed to
support Intel®
Pentium 4 socket 478 processors and the largest DDR memory capacity is
up to 2GB. It also provides advanced features such as Wake up by USB devices, Wake-
on- AN, Wake-on-Modem, ACPI and Keyboard Password Power-on functions. Suspend
to RAM, the optimal implementation of the Advanced Configuration and Power Interface
(ACPI) specification, makes the PCs power consumption drop to the lowest possible level
and enable quick wakeup. BootEasy, QDI innovation, lets the PC boot freely and rapidly.
StepEasyII, our new innovation is also supplied to enable you to adjust CPU frequency
step by step easily to utilize CPUs potential ability.
Key Features
Form factor
#"ATX form factor of 305mm x 224mm
Microprocessor
#"Supports Intel® Pentium 4 (Willamette) socket 478 processors at 1.4/1.5/1.6/1.7/1.8/1.9
2.0GHz and above
#"Supports Intel® Pentium 4 (Northwood) socket 478 processors at 2.0/2.2GHz and
above
#"Supports 400MHz host bus speed
System memory
#"Provides two 184-pin DDR SDRAM interfaces
#"Supports DDR200/DDR266 SDRAM
#"Supports 64/128/256/512Mb technology up to 2GB
Onboard IDE
#"Supports Independent timing of up to 4 drives
#"Supports Ultra ATA 33/66/100, PIO mode
#"Two fast IDE interfaces supporting four IDE devices including IDE hard disks and CD
ROM drives
Manual for latiniX 2D series
Introduction
Onboard LAN (available on PlatiniX 2D-L/-AL, PlatiniX 2DI-L/-AL)
#"10/100 Mbit/sec Ethernet support
#"10/100M AN interface built-in on board
4 US
#"USB 1.1 compliant
#"Supports wake-up from S1 (power on suspend), S3(depends on device)
Onboard I/O
#"One floppy port supporting up to two 3.5″ or 5.25″ floppy drives with 360K/720K/1.2M/
1.44M/2.88M format
#"Two high speed 16550 compatible UART (COM1/COM2/COM3/COM4 selective) with
16 byte send/receive FIFO
#"One parallel port supports SPP/EPP/ECP mode
#"Infrared interface
#"All I/O ports can be enabled/disabled in the BIOS setup
Onboard Audio(available on PlatiniX 2D-A/-AL, PlatiniX 2DI-A/-AL)
#"AC97 2.1 Specification Compliant
#"16bit stereo codec
#"Multiple stereo input mixer
#"Mono and stereo volume control
#"Provides onboard ine-in Jack, Microphone-in Jack, Speaker-out Jack with onboard
amplifier and MIDI/Joystick Connector
AGP Interface
#"AGP Connector supports AGP 2.0 including AGP 4x data transfers
Advanced features
#"PCI 2.2 Specification Compliant
#"Provides Trend ChipAwayVirus On Guard
#"Supports Windows 98/2000/ME soft-off
#"Supports Wake-on- AN and Wake-on-Modem
#"Supports Keyboard Password Power-on function
#"Supports system monitoring(monitors CPU and system temperatures, system
voltages, fan speed)
#"Providing QDI innovations: RecoveryEasy, BIOS-ProtectEasy, ogoEasyII,
ManageEasy(optional), BootEasy, StepEasyII, SpeedEasyII.
Manual for latiniX 2D series
Chapter 1
IOS
#"icensed advanced AWARD(Phoenix) BIOS, supports flash ROM, plug and play ready
#"Supports IDE CDROM/SCSI boot up
Green function
#"Supports ACPI (Advanced Configuration and Power Interface) and ODPM (OS
Directed Power Management)
#"Supports ACPI power status: S0 (full-on), S1 (power on suspend), S3 (suspend
to RAM), S4(suspend to Disk,depends on OS) and S5 (soft-off)
New Feature
#"CPU,AGP,DDR Voltage adjusting function
Adjusting CPU core voltage in BIOS to improve system stability and overclocking ability.
Adjusting AGP voltage in BIOS to improve system stability and overclock ability.
Adjusting DDR voltage in BIOS to improve system stability and overclock ability.
#" Diagnosis LED
The mainboard provides Diagnosis ED function to indicate CPU, chipset, memory,
PCI device, clockgen and Video status during system booting up.This function may
make maintance of your computer more convenient and simple.During POST, if CPU is
burned out or the BIOS chip is damaged or CPU is absent, ED1 will blink at a frequency
of 1Hz, when the POST comes to CPU checking and chipset initializing, memory testing,
PCI detecting, clockgen initializing and Video initializing, the EDs will light up in turn.
When the POST finishes all the 5 EDs will turn off. Otherwise the coresponding ED
will remain light up to indicate a problem occurs.
#" Po er supply flexibility
Users are strongly recommanded to use an ATX12V power supply. However, the
PlatiniX 2D mainboard can also work with a legacy ATX power supply as long as its
+12V rail can deliver enough current(at least 8 Amperes).
NOTE: System stability with an ATX power supply is not guaranteed here and we are
not responsible for any damage caused.
T-- This page is intentionally left blank --his
Manual for latiniX 2D series
Chapter 2
PS/2 Mouse
Connector
PS/2 Keyboard
Connector
@
Chapter 2
Installation Instructions
This section covers External Connectors and Jumper Settings. Refer to the mainboard
layout chart for locations of all jumpers, external connectors, slots and I/O ports.
Furthermore, this section lists all necessary connector pin assignments for your refer-
ence. The particular state of the jumpers, connectors and ports are illustrated in the
following figures. Before setting the jumpers or inserting these connectors, please
pay attention to the direction.
External Connectors
PS/2 Keyboard/Mou e Connector
PS/2 keyboard connector is for the usage of PS/2 keyboard. If using a standard AT size
keyboard, an adapter should be used to fit this connector. PS/2 mouse connector is for
the usage of PS/2 mouse.
USB1, USB2 and LAN Connector
( AN connector is only available on PlatiniX 2D- /-A , PlatiniX 2DI- /-A )
Two USB ports are for connecting USB devices. The RJ-45 connector is for onboard AN.
Be sure to unplug the AC po er supply before adding or removing expansion
cards or other system peripherals, other ise your mainboard and expansion
cards might be seriously damaged.
USB1
USB2
LAN(optional)
L NK ACT VE
Manual for latiniX 2D series
Parallel Port, Serial Port Connector (UART1, UART2)
The parallel port connector can be connected to a parallel device such as a printer.
The serial port UART1,2 connectors can be connected to a serial port device such as a
serial port mouse. You can enable/disable them and choose the IRQ or I/O address in
Integrated Peripherals from AWARD CMOS SETUP.
Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joy tick
Connector (available on PlatiniX 2D-A/-AL, PlatiniX 2DI-A/-AL)
The ine-in jack can be connected to devices such as a cassette player or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio
output from the internal amplifier.The MIDI/Joystick connector allows you to connect a
game joystick or a MIDI device.
Installation Instructions
MIDI/Joystick
Speaker out Line in Microphone in
Parallel Port
UART1 UART2
Cha i Security Switch (CHSSEC)
The connector connects to the chassis security switch on the case. The system can
detect the chassis intrusion through the status of this connector. If the connector has
been closed once, the system will record the status and indicate the chassis has been
opened. You can monitor or check this information from QDI ManageEasy(optional) soft-
ware.
GND
ndicate signal
CHSSEC
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere QDI Hauptplatine Handbücher
QDI
QDI LEGEND-V Bedienungsanleitung
QDI
QDI P5I945P Bedienungsanleitung
QDI
QDI WinneX 5 Bedienungsanleitung
QDI
QDI BA1 Bedienungsanleitung
QDI
QDI PlatiniX 4N Series Bedienungsanleitung
QDI
QDI P6I440BX/B1S Bedienungsanleitung
QDI
QDI P6I440EX/MATX EXCELLENT II Bedienungsanleitung
QDI
QDI PlatiniX 1 Bedienungsanleitung
QDI
QDI WinneX3E Bedienungsanleitung
QDI
QDI K8N4 Series Bedienungsanleitung
QDI
QDI P4I848P Bedienungsanleitung
QDI
QDI P4I865G Bedienungsanleitung
QDI
QDI BrillianX 8V Bedienungsanleitung
QDI
QDI PlatiniX P8/333 Series Bedienungsanleitung
QDI
QDI GeniuX 4 Bedienungsanleitung
QDI
QDI GeniuX 1 Bedienungsanleitung
QDI
QDI ZillioX 9 Bedienungsanleitung
QDI
QDI K8V800 Bedienungsanleitung
QDI
QDI P6I440LX/L6 Bedienungsanleitung
QDI
QDI Advance 10T Series Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
