Qeedji SBL10e Bedienungsanleitung
User manual
SBL10e m365_room
1.11.10 002A
2
Legal notice
SBL10e m365_room 1.11.10 (002A_en)
© 2020 Qeedji
Rights and Responsibilities
All rights reserved. No part of this manual may be reproduced in any form or by any means whatsoever. or by any means whatsoever without the
written permission of the publisher. The products and services mentioned herein may be trademarks and/or service marks of the publisher. or
trademarks of their respective owners. The publisher and the author do not claim any rights to these Marks.
Although every precaution has been taken in the preparation of this document, the publisher and the author assume no liability for errors or
omissions, or for damages resulting from the use of the information contained in this document or the use of programs and source code that can go
with it. Under no circumstances can the publisher and the author be held responsible for any loss of profits or any other commercial prejudice caused
or alleged to have been caused directly or indirectly by this document.
Product information
Product design and specifications are subject to change at any time and `Qeedji` reserves the right to modify them without notice. This includes the
hardware, the embedded software and this manual, which should be considered as a general guide to the product. The accessories supplied with the
product may differ slightly from those described in this manual, depending on the developments of the various suppliers.
Precautions for use
Please read and heed the following warnings before turning on the power: - installation and maintenance must be carried out by professionals. - do
not use the device near water. - do not place anything on top of the device, including liquids (beverages) or flammable materials (fabrics, paper). - do
not expose the device to direct sunlight, near a heat source, or in a place susceptible to dust, vibration or shock.
Warranty clauses
The `Qeedji` device is guaranteed against material and manufacturing defects for a certain duration. Check the device warranty duration value at the
end of the document. These warranty conditions do not apply if the failure is the result of improper use of the device, inappropriate maintenance,
unauthorized modification, operation in an unspecified environment (see operating precautions at the beginning of the manual) or if the device has
been damaged by shock or fall, incorrect operation, improper connection, lightning, insufficient protection against heat, humidity or frost.
WEEE Directive
This symbol means that your appliance at the end of its service life must not be disposed of with household waste, but must be taken to a collection
point for waste electrical and electronic equipment or returned to your dealer. Your action will protect the environment. In this context, a collection
and recycling system has been set up by the European Union.
3
1.1
1.1.1
1.1.2
1.1.3
1.1.4
1.2
2.1
3.1
3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.1.8
3.1.9
3.1.10
3.1.11
3.1.12
4.1
4.2
5.1
6.1
6.2
6.3
6.4
6.5
6.6
Table of contents
Part I : Description and installation
Introduction
Device dimensions
Labelling
Installation
Uninstallation
Smart Busy Light applications
Part II : Applicative user interface
Applicative user interface
Part III : Administration console user interface
Administration console user interface
Configuration > Administrator
Configuration > LAN
Configuration > Servers
Configuration > Date and time
Configuration > Tasks
Maintenance > Firmware
Maintenance > Preferences
Maintenance > Logs
Maintenance > Tools
Maintenance > Files
Information > Device
Information > Network
Part IV : Technical information
Technical specifications
Conformities
Part V : Contacts
Contacts
Part VI : Appendix
Appendix: Web services
Appendix: Qether
Appendix: Azure AD User Principal Name
Appendix: AZURE AD Application Powershell module
Appendix: Microsoft Azure AD portal for Microsoft 365
Appendix: Configuration using powerShell for Microsoft 365 (M365)
4
Part I Description and installation
5
1.1 Introduction
This manual explains how to install and configure your device SBL10e.
Recommendations and w arnings
This device is designed for indoor use only.
To ensure better rendering of the SBL10e, the device should not be installed under direct sunlight.
The SBL10e device is designed to be illuminated 12 hours a day, 7 days a week.
Pack age Contents
Articles Description
Device SBL10e device with the default regular ¹ application embedded.
¹ It is possible to easily update the device with the m3 6 5 _room application afterwards.
6
1.1.1 Device dimensions
7
1.1.2 Labelling
Product label
The model of the device, the power supply characteristics, the serial number (PSN) and the MAC address are written on a label stuck on the case.
☛ The QR code on the product label is corresponding to the product identification UR L, for example:
i.q eedj i.tech?model=S B L 10 e&sn=0 13 2 0 -0 0 0 0 9 &mac.lan1=0 0 -1C -E 6 -0 2 -4C -E C &mac.wpan1=D F -2 7 -8 3 -3 C -8 A -9 0 .
Pack ingbox label
This is the label stuck also on the packingbox. It is showing:
the device model,
the product serial number (PSN) (embedded also in the QR code),
the manufacturer Web site.
☛ The QR code on the packingbox label is corresponding to the product P SN , for example:
PSN01320-00009 CD1 .
☛ The serial number of the device could be req uested in case of technical support.
8
1.1.3 Installation
☛ Install the SBL10e device on the E thernet wall plugs of the buildings following the installation map given by your IT departement.
The SBL10e device has to be plugged to an Ethernet wall plug supporting PoE IEEE802.3af.
G iven the device footprint, it is preconised to use Ethernet wall plug plastron with a right insertion.
Consequently, the Ethernet wall plug whose plastron is angled is not supported.
☛ Thanks to the lock pin of its E thernet connector, the SBL10e device can be installed on vertical surfaces, like walls as well as horizontal
surfaces, like ceilings.
10
1.2 Smart Busy Light applications
The m365_room application periodically connects to your M365 (Microsoft 365) solution and to get information about the O ffice calendar of a specific
resource id. If an event has started or happening in the day, the event' s title, the event' s start time and the event' s end time can be watched in the
SBL10e Web user interface. Depending on the event has started, happens soon or will happen later in the day, the appropriate light state/color is
displayed.
Light states and colors
The SLB10e can support the states and colors values showed below.
Color State
OFF
Red ON steady or ON flashing
Green ON steady or ON flashing
Blue ON steady or ON flashing
Orange ON steady or ON flashing
Yellow ON steady or ON flashing
☛ The O N flashing state is fl ashing with this seq uence: O N for 0,5 seconds then O F F for 0,5 seconds every one second.
☛ Depending on the application running on it, some color/ state may be never used.
☛ The light color and state values are stored in the volatile memory (R AM). That means that in case the SBL10e device is unplugged from the
E thernet wall plug then plugged back again, the light comes back to its default state: O F F .
Andere Handbücher für SBL10e
3
Inhaltsverzeichnis
Andere Qeedji Beleuchtungsausrüstung Handbücher
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
