Qlogic SANbox 5000 Series Bedienungsanleitung

[Quick Start Guide ]

QUICK START GUIDE

FIBRE CHANNEL SWITCH INSTALLATION d

SANbox®5000 Series

for Windows®Operating Systems

Purchasers of OEM products should consult with the OEM for support.

Support Headquarters QLogic Corporation

12984 Valley View Road

Eden Prairie, Minnesota 55344-3657

USA

QLogic Web Site www.qlogic.com

Technical Support Web Site support.qlogic.com

Technical Support Email [email protected]

Technical Training Email [email protected]

North American Region

Email [email protected]

Phone +1-952-932-4040

Fax +1 952-974-4910

Europe, Middle East, and Africa Region

Email [email protected]

Phone Numbers by Language +353 1 6924960 - English

+353 1 6924961 - Français

+353 1 6924962 - Deutsch

+353 1 6924963 - Español

+353 1 6924964 - Português

+353 1 6924965 - Italiano

Asia Pacific Region

Email [email protected]

Phone Numbers by Language +63-2-885-6712 - English

+63-2-885-6713 - (Mandarin)

+63-2-885-6714 - (Japanese)

+63-2-885-6715 - (Korean)

Latin and South America Region

Email [email protected]

Phone Numbers by Language +52 55 5278 7016 - English

+52 55 5278 7017 - Español

+52 55 5278 7015 - Português

Quick Start Guide

Installation Instructions

Congratulations on your purchase of the SANbox® 5000 Series Fibre Channel Switch. This guide describes the steps

to install and activate your new switch using a Windows® workstation. For advanced options and instructions (including

Solaris®, Linux®, and Mac OS X® installations), refer to the SANbox 5000 Series Fibre Channel Switch Installation

Guide on the product CD.

NOTE: Do not apply power to the switch until instructed in Step 5.

Step 1. Verify the Package Contents

The SANbox 5000 Series Fibre Channel Switch is shipped with the following items:

1 SANbox 5000 Series Fibre Channel Switch

1 AC Power cord (5600)

2 AC Power cords (5602)

4 Rubber feet

2 Mounting brackets (5600)

1 Mounting screws (5600)

1 Enterprise Fabric Suite 2007 CD (free 30-day trial)

NOTE: Determine if your switch order included Small Form Factor Pluggable (SFP) transceivers. If so, your switch

may come with 8, 12, or 16 SFPs depending on your switch configuration. If you ordered SFPs and XPAK switch stacking

cables separately, they will arrive in a different package. XPAK switch stacking cables connect SANbox 5000 Series

switches together through the XPAK ports. The switch must have a 20-port license to enable the XPAK ports, or you

must activate the 10-Gbps ports using the mPort Technology™ feature in Enterprise Fabric Suite 2007.

Step 2. Mount the Switch

❑5600 Rack Mount with Brackets: Fasten the brackets to

the switch using 2 screws per bracket. Choose the

bracket holes to produce the desired set back. Place the

switch in a standard 19" rack and fasten each bracket to

the rack with two screws.

❑Rack Mount with Rail Kit: Install the SANbox 3000/5000

rail kit in a standard 19" rack as described in the Rack

Mounting Guide.

ALALA

Step 3. Stack Switches

If your switch is licensed for 20 ports, or you have activated the 10-Gbps ports using the mPort Technology feature in

Enterprise Fabric Suite 2007, you can connect up to six switches together through the 10-Gbps ports using XPAK switch

stacking cables. Stacking provides performance and fail-over while preserving ports for devices.

❑For a 2-switch stack, use two 3-inch stacking cables.

❑For a 3-switch stack, use two 3-inch stacking cables and one 9-inch stacking cable.

❑For a 4-switch stack, use three 3-inch stacking cables and three 9-inch stacking cables.

❑For a 5-switch stack, use four 3-inch stacking cables and four 9-inch stacking cables.

❑For a 6-switch stack, use two 3-inch stacking cables and six 9-inch stacking cables.

❑Remove the 10-Gbps port covers according to the instructions provided with the stacking cables. Connect 2, 3, 4,

5, or 6 switches into stacks.

2-SWITCH STACK

3-SWITCH STACK

4-SWITCH STACK

5-SWITCH STACK

6-SWITCH STACK

Step 4. Install Transceivers

An SFP transceiver is required for each switch port that will be connected to a device or another switch. The SANbox

5200 series switches support 1-Gbps and 2-Gbps transmission. The SANbox 5600 series switches support 1-Gbps,

2-Gbps, and 4-Gbps transmission.

❑To install an SFP transceiver, insert the transceiver into the switch port and gently press until it snaps in place. The

transceiver will fit only one way. If the transceiver does not install under gentle pressure, flip it over and try again.

Step 5. Apply Power to the Switch

❑Attach the AC power cord(s) to the switch and wall

outlet or power strip. Verify that the Input Power LED

is illuminated.

❑The switch runs its self tests and begins normal

operation – this may take a few minutes. Verify that

the Heartbeat LED is blinking (once per second) and

the System Fault LED is NOT illuminated.

Step 6. Verify Workstation Requirements

❑Verify that your workstation can support the QuickTools™ application with the following minimum requirements:

❑Windows® 2003 SP1/SP2/R2 and XP

❑256 MB memory minimum; 512 MB recommended

❑1 GHz processor

❑Video card with 256 colors

❑CD ROM drive, RJ-45 Ethernet port

❑Internet Browser: Microsoft® Internet Explorer® 5.0, Netscape Navigator® 6.0, Firefox 1.0, or Mozilla™ 1.5

❑Java® 2 Standard Edition Runtime Environment 1.4.2

❑The default IP address of a new switch is 10.0.0.1. Ensure that your workstation is configured to communicate

with the 10.0.0 subnet.

Step 7. Connect the Workstation to the Switch

❑Connect the workstation to the switch using an Ethernet crossover cable, switch, or hub. If you are using a Windows

workstation, you must have a live Ethernet connection when the workstation powers up.

INPUT POWER

LED

HEARTBEAT

LED

SYSTEM

FAULT LED

Step 8. Log In to the Switch

You can log in to and manage the switch using the command line interface, the QuickTools web applet, or the optional

workstation-based application, Enterprise Fabric Suite 2007™. This guide will describe the use of QuickTools. For more

information about using Enterprise Fabric Suite 2007 under the 30-day trial license, see the SANbox 5000 Series Fibre

Channel Switch Installation Guide.

❑Open an Internet browser and enter the default IP address 10.0.0.1 to start the QuickTools web applet.

❑Log in to the switch using the default user name (admin) and password (password).

Step 9. Run the Configuration Wizard

❑Obtain the IP address and subnet mask from your network administrator.

❑Open the QuickTools Wizards menu and select Configuration Wizard. Follow the instructions to set network

parameters and the password. The default user name is admin; the default password is password. Changing the

IP address will terminate the QuickTools session.

❑Open an Internet browser again and enter the new IP address to log in to switch.

Step 10. Connect Devices and Switches

❑Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port

auto-negotiates the proper port type with the connected device or switch.

Congratulations!

You have successfully installed your QLogic SANbox 5000 Series Switch!

trademarks or trademarks of QLogic Corporation. All other brands and product names are trademarks or registered

trademarks of their respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic

Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without

notice, to makes changes in product design or specifications.

*50328-08 A*

JQLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656

949.389.6000 www.qlogic.com

50328-08 A

Andere Handbücher für SANbox 5000 Series

Inhaltsverzeichnis

Andere Qlogic Schalten Handbücher

Qlogic

Qlogic SANbox 5800V Series Bedienungsanleitung

Qlogic

Qlogic HyperStack 9000 Series Bedienungsanleitung

Qlogic

Qlogic SANbox 5000 Series Bedienungsanleitung

Qlogic

Qlogic SANbox 5600Q Bedienungs- und Wartungsanleitung

Qlogic

Qlogic SANbox 1400 Series Bedienungsanleitung

Qlogic

Qlogic 3000 Series Bedienungsanleitung

Qlogic

Qlogic QLogic 9000 Series Bedienungsanleitung

Qlogic

Qlogic SANbox 3050 Bedienungsanleitung

Qlogic

Qlogic SANbox 5600 Series Handbuch

Qlogic

Qlogic SANbox2 SANbox2-64 Handbuch

Qlogic

Qlogic SANbox 5802V Bedienungsanleitung

Qlogic

Qlogic SANbox 1400 Series Bedienungsanleitung

Qlogic

Qlogic SANbox 5202 Handbuch

Qlogic

Qlogic SANbox 5800V Series Bedienungsanleitung

Qlogic

Qlogic SANbox 3810 Bedienungsanleitung

Qlogic

Qlogic SANbox2 SANbox2-64 Handbuch

Qlogic

Qlogic SANbox 5602 Bedienungsanleitung

Qlogic

Qlogic SANbox 5000 Series Bedienungsanleitung

Qlogic

Qlogic SANbox2 SANbox2-64 Handbuch

Qlogic

Qlogic SANbox 5600 Series Bedienungsanleitung

Qlogic

Qlogic QLogic 12000 Series Bedienungsanleitung

Qlogic

Qlogic 5600Q Bedienungsanleitung

Qlogic

Qlogic SANbox 3810 Bedienungsanleitung

Qlogic

Qlogic SANbox 5600 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung