Qsan XCubeNXT XN5012D Bedienungsanleitung

XCubeNXT

硬件手册

适用机型:

XN5012D / XN5016D / XN5024D / XN5026D

Edition 1.0 (September 2020)

This document applies to QSAN XCubeNXT XN5000D unified storage systems. QSAN

believes the information in this publication is accurate as of its publication date. The

information issubjecttochange without notice.

Trademarks

QSAN, the QSAN logo, XCubeNXT, and QSAN.com are trademarks or registered

trademarks of QSAN Technology, Inc.

Intel, Xeon, Pentium, Core, Celeron and Intel Inside logo are trademarks of Intel Corporation

in the United States and other countries.

Other trademarks and trade names used in this document to refer to either the entities

claiming the marks and names or their products are the property of their respective owners.

Notices i

Notices

The Information contained in this manual has been reviewed for accuracy. It may include

typographical errors or technical inaccuracies. Changes are made to the document

periodically. These changes will be incorporated in new editions of the publication. QSAN may

make improvements or changes in the products. All features, functionality, and product

specifications are subject to change without prior notice or obligation. All statements,

information, and recommendations in this document do not constitute a warranty of any kind,

express or implied.

Any performance data contained herein was determined in a controlled environment.

Therefore, the results obtained in other operating environments may vary significantly. Some

measurementsmayhavebeenmadeondevelopment-levelsystemsandthereisnoguarantee

that thesemeasurementswillbe the same ongenerally available systems. Furthermore, some

measurements may have been estimated through extrapolation. Actual results may vary.

Users of this document should verify the applicable data for their specificenvironment.

This information contains examples of data and reports used in daily business operations. To

illustrate them as completely as possible, the examples include the names of individuals,

companies, brands, and products.

All of these names are fictitious and any similarity to the names and addresses used by an

actual business enterprise is entirely coincidental.

Regulatory Statements

CE Statement

This device has been shown to be in compliance with and was tested in accordance withthe

measurement procedures specified in the Standards and Specifications listed below.

Technical Standard: EMC DIRECTIVE 2014/30/EU Class A

(EN55032 / EN55024)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

Reserved.

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and uses in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Notice: The changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equivalent.

BSMI Statement

VCCI Statement

VCCI-A

KCC Statement

(This equipment has approved for EMC on purpose of business use and there is possible

for radio interference for home use.)

(A )

(

)

Safety Warnings

1. TheXCubeNXT can operate normallyinthetemperature of 0ºC~40ºC(31.99

~ 103.99°F). Please make sure the environment is well-ventilated.

2. The power cord x 2 and devices connected to the XCubeNXT must provide

a correct supply voltage (100-127V~/ 10A, 50-60Hz. 200-240V~/ 5A, 50-

60Hz).

3. Do not place the XCubeNXT in direct sunlight or near chemicals. Make

sure the temperature and humidity of the environment are in the optimized

level.

4. Place the product right side up at all times.

5. Unplug the power cord and all connected cables before cleaning. Wipe the

XCubeNXT with a dry towel. Do not use chemical or aerosol to clean the

storage.

6. Do not place any objectson the XCubeNXT for the server’s normaloperation

and toavoid overheat.

7. Use the screws provided in the product package to lock the hard disks in the

XCubeNXT when installing hard disks for proper operation.

8. Do not place the XCubeNXT near any liquid.

9. Do not place the XCubeNXT on any uneven surface to avoid falling off anddamage.

10. Do no place the XCubeNXT on the ground and do not step on the system

to prevent any potential damages.

11. Make sure thevoltage iscorrect in the location where the XCubeNXT is

installed.Contact the distributor or the local power supply company for the

information.

12. Do not place any object on the power cord.

13. Do not attempt to repair the XCubeNXT in any occasions. Improper

disassembly of the product may expose the users to electric shock or other

risks. For any inquiries, please contact the distributor.

14. To remove all electrical current from the device, ensure that all power cords

are disconnected from the power source.

15. The XCubeNXT should only be installed in restricted access location such

as in the server room and maintained by the qualified service person. The

server room is locked by key or keycard, or other means of security access

and only a qualified service person is allowed to enter the server room.

Reserved.

CAUTION:

Replacing incorrect type of battery will have the risk of explosion. Please

replace the same or equivalent type battery use and dispose of used

batteries according to the instructions.

CAUTION: Restricted Access Location

This system is intended for installation only in restricted access locations

as defined where both these conditions apply:

Access can only be gained by service persons or by users who have

been instructed about the reasons for the restrictions applied to the

location and about any precautions that shall be taken.

Access is through the use of a tool or lock and key, or other means

of security, and is controlled by the authority responsible for the

location.

Warning

Electric shock hazard



The system may have one or more power supply unit (PSU) cords.

To avoid serious injuries, it is recommended that all PSU power

cords must be disconnected by trained service technicians before

installing or replacing system components.

INFORMATION:

QSAN provides a limited warranty for QSAN-branded hardware products:

System hardware and peripheral product (s): 3 years limitedwarranty

from date of original purchase.

For more detail warranty policy, please refer to QSAN official website:

https://www.qsan.com/en/warranty.php

9
 
 
目录 
 
Notices....................................................................................................................1 
Regulatory Statements............................................................................................. 1 
Safety Warnings....................................................................................................... 7 
前言 11
关于产品 ................................................................................................................ 11 
相关文档 ................................................................................................................ 11 
技术支持 ................................................................................................................ 12 
信息、提示和注意事项 ........................................................................................... 12 
符号对照表............................................................................................................. 13 
1.
 简介 ..............................................................................................................14
1.1.
 包装内容物 ................................................................................................. 14 
1.2.
 XN5000D 产品规格..................................................................................... 15 
2.
 硬件概述.......................................................................................................17
2.1.
 前面板/后面板............................................................................................. 17 
2.2.
 磁盘编号..................................................................................................... 21 
2.3.
 磁盘规格与形态 .......................................................................................... 22 
3.
 硬件安装.......................................................................................................24
3.1.
 安装磁盘..................................................................................................... 24 
3.1.1. 安装磁盘所需的工具和零件............................................................ 24 
3.1.2. LFF 磁盘托架说明 ......................................................................... 25 
3.1.3. 安装磁盘 (LFF & SFF)................................................................... 26 
3.2.
 扩展内存..................................................................................................... 30 
3.3.
 安装扩充子卡.............................................................................................. 34 
3.4.
 更换风扇..................................................................................................... 38 
3.5.
 更换电源供应器 .......................................................................................... 39 

10 
© Copyright 2020 QSAN Technology, Inc. All Rights 
Reserved. 
 
 
3.6.
 更换系统控制器 .......................................................................................... 40 
3.7.
 更换内存Cache保护模块............................................................................. 41 
3.8.
 安装导轨..................................................................................................... 42 
3.9.
 连接网络线 ................................................................................................. 46 
3.10.
 启动系统..................................................................................................... 47 
4. 寻找并安装 QSM..........................................................................................48
5. 重新启动 / 关闭 / 注销 QSM..........................................................................50
7.1.
 XN5000D LED 指示灯 ................................................................................ 53 
7.2.
 内存高速缓存保护模块LED和按钮 .............................................................. 57 
7.3.
 主机卡LED指示灯表 ................................................................................... 57 
9.1.
 部署原则..................................................................................................... 60 
9.2.
 部署您的装置.............................................................................................. 61 
10.
 快速维护 .......................................................................................................64
10.1.
 更换风扇模块.............................................................................................. 65 
10.2.
 更换电源供应器 .......................................................................................... 66 
11.
 相关技术支持................................................................................................68
11.1.
 取得技术支持.............................................................................................. 68 
11.2.
 意见回馈..................................................................................................... 69 
Appendix...............................................................................................................70 
End-User License Agreement (EULA).................................................................... 70 
Expansion Enclosure List....................................................................................... 64 
 
 