Quadro MC-100 Bedienungsanleitung

AUDIO MICRO SYSTEM

User manual

ENGLISH

MC-100

Please read this User Manual carefully to ensure proper use of this product and keep this manual for further

reference.

ENGLISH

Warnings ................................................................................................................... 1

Precautions ............................................................................................................... 2

Introduction ............................................................................................................... 3

Unpacking .................................................................................................................................... 3

Power Sources ............................................................................................................................ 3

Front panel and Connections .................................................................................................. 4

Operation ................................................................................................................... 5

General operations ................................................................................................... 6

Radio operation......................................................................................................... 6

USB/SD operation .......................................................................................................................6

Playback...................................................................................................................................6

General USB/SD notes .......................................................................................................... 6

AUX jack .....................................................................................................................7

Maintenance & safety ................................................................................................7

Trouble shootings......................................................................................................8

Technical specifications............................................................................................9

Declaration of Conformity.........................................................................................................9

Enviromentally treatment..........................................................................................................9

Technical specifications............................................................................................................9

- 1 -

Do not use the machine either voltage is

not correspond with notified voltage on the

rating plate. If voltage is not correct, it is

possibility of the unit damage or risk of fire.

ENGLISH

- 2 -

Leave space for ventilation, 5cm at least,

though the machine does not produce too much

heat. And the following places are not

suggested as a proper location:

• Unstable surfaces, damp and dirty places

• Places exposed to heat sources or sunlight;

The device culd not be placed closed to the

open flame sources, for example, lighted

candles

• Excessive increased volume of the

headphones can result in damage to or

loss of hearing

This "bolt of lighting" indicates

uninsulated material within your

unit which may cause an electrical

shock. For safety of everyone in your

houshold, please do not remove product

cover.

The "exclamation point" calls

attention to features for which you

should read the enclosed literature

cl osely to pr ev en t opera ti ng a nd

maintenance problems.

For Customer Use

Ente r below th e Seri al No. whi ch is located

On the botto m of the cabinet. Retain th is

Info rmation fo r future refere nce.

Mode No.

Seri al No.

ENGLISH

- 3 -

ENGLISH

PREPARATION FOR USE

Unpacking and Setup

* Carefully remove the unit from the display carton and remove all packing material from the unit

itself.

* Remove any descriptive labels that may be found on either the front or top cabinet of the unit.

Do not remove any labels located on either the back or button cabinet of the unit.

Power Sources

Using AC Power

1. Check the Power voltage, as shown on the product Rating label on the unit bottom, corresponds

to you local AC Power Supply. If it does not, consult your dealer or service centre.plate

2. Connect the AC power into Standard household wall outlet.

3. To switch off unit completely, unplug the power cord from the wall outlet.

Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.

Batteries (not included)

1. Open the battery compartment and insert six batteries, Alkaline type LR14, UM-2 or C-cells with

the correct polarity as indicated by the ”+” and ”-” symbols inside the compartment.

Batteries contains chemical substances, so they should be disposed of properly. Incorrect use of

batteries can cause electrolyty leakage and will corrode the compartment or cause the batteries to

burst. Therefore:

- Do not mix a differenty types of the batteries, e.g. Alkaline with Carbon-Zinc types. Only use

batteries of the same type.

- When inserting new Batteries, do not try to mix old Batteries with new ones.

- Remove the Batteries if the set is not to be used for a long time.

- 4 -

FRONT PANEL AND CONNECTIONS

ENGLISH

13. AC SOCKET

14. FM ANTENNA

15. AUX JACK

16.PHONES JACK

17. VOLUME+ BUTTON

18.VOLUME- BUTTON

19.PRE-DN/-10 BUTTON

20.PRE-UP/+10 BUTTON

21.BATTERY DOOR

1. SD JACK

2.FUNCTION SELECT

3. PLAY/PAUSE/TIME BUTTON

4. USB JACK

5. STANDBY

6. EQ

7. REPEAT/MEMORY

8. LEFT&RIGHT SPEAKER

9. LCD DISPLAY

10.STOP BUTTON

11.NEXT BUTTON

12.BACK BUTTON

Standby mode

After the unit is connected to the power source or the battery is inserted, it is

in standby mode; the clock is shown on the display. Press STANDBY button

to switch it on from the standby mode; the radio mode will be activated.

In the standby mode only clock function is available

Clock setting

In the standby mode press PLAY/PAUSE /TIME button on the device, the hour digits will blink;

Press BACK and NEXT buttons to set hours.

Press PLAY/PAUSE/TIME again, the minute digits will blink; press BACK and

NEXT buttons to set minutes. Press the TIME button again to confirm.

OPERATION

GENERAL OPERATIONS

ENGLISH

- 5 -

Power supply

Battery operation

Open the battery compartment cover. Insert 6 x 1.5V LR14, UM-2 batteries (not include).

Please observe correct battery polarity or the unit will not work.

Close the battery compartment cover.

When the batteries are exhausted, they should be replaced.

Do not recharge or heat the batteries.

Uncharged batteries are not a reason for contacting a repair service.

Disconnect power cord from the socket, when the unit is on battery

supply. Battery power is automatically disconnected when the power cord

is connected to a power socket.

AC operation

Before first plugging the appliance check that voltage indicated on the

rating label corresponds to the mains voltage in your home.

Insert the plug of the power cord into a power supply socket.

- 6 -

Radio operation

USB/SD operation

ENGLISH

Press FUNCTION button to enable the radio mode.

Press and hold PLAY/PAUSE/TIME button; the unit will automatically scan the

frequency range and save all available stations in the memory (up to 30).

When the automatic search will be completed, the unit will start broadcasting

the first found station. If you want to stop the search, press PLAY/PAUSE/TIME

button again.

Press repeatedly BACK and NEXT buttons to adjust the current

frequency manually.

. Press MEMORY button once, the memory slot number will be displayed.

. Press PRESET-UP or PRESET-DOWN buttons to select the desired number.

. Press MEMORY button to save that station.

. Press PRESET-UP or PRESET-DOWN buttons to select a saved station.

. Extend the FM antenna for a better signal reception.

Playback

Turn on the device

Insert a USB device into the USB port or SD card into the slot.

The unit will switch to USB/SD mode automatically and the USB/SD icon will show

in the top of the display. Or, if afterwards you selected another mode, press FUNC.

button repeatedly to select USB mode.

Playback of the first track will start automatically. The display will show PLAY icon

in the top and the number of the track.

Press PLAY/PAUSE/TIME button to pause playback. Press the button again

to resume playback. Press STOP button to stop playback; Play icon will disappear

and the display will show the total number of tracks.

Press repeatedly BACK and NEXT buttons to go to previous or next track.

Press and hold BACK or NEXT buttons for fast reverse or fast forward playback;

release the button for normal playback.

Press REPEAT button once (REP icon will be displayed),the current track will be

played repeatedly. Press the button once again(ALL icon will be displayed),all tracks

will be played repeatedly. Press this button again to return to normal playback(ALL

and REP icons are not displayed).

Press EQ to select function as: CLASSIC -> ROCK ->POP ->JAZZ -> FLAT.

General USB/SD notes

According to the USB 1.1/2.0 Standard, usage of a USB device with power Current consumption

exceeding 500mA is not recommended withoutsupplementary power supply.

Failure to use supplementary power for connected USB drives with power consumption exceeding

this value as well as defective USB drives may cause mechanical or thermal changes of elements

of this unit as well as failure of internal elements of the USB port.

Such damages are not warrantee cases.

Warning: usage of external USB drives containing BIN files in the root directory May cause

malfunction of the unit or damage to the software.

This unit is equipped with a USB socket that can accept and play Mp3 files stored on standard USB

flash(2.0 version)/SD cards up to 32 GB. .FAT and FAT32 file system is support by this unit.

- 7 -

AUX jack

AUX PLAY

You can connect the audio output of an external device to this unit, to listen to the sound of that device

through the speakers of this unit.

To connect an external audio device, please use a standard audio cable with 3.5-mm- to-3.5mm

plugs(not included) to connect the headphone out or audio line-out of the external device to the AUX

input socket of this unit.

Press FUNCTION button repeatedly to select AUX mode; AUX icon will be displayed.

Turn on the external device. You can not control playback with the buttons of this unit except adjusting

the volume.

POWER OFF FUNCTION (ERP 2)

When the radio idle on USB/SD/AUX mode over 10 min. The unit will turn

to standby mode automatically.

ENGLISH

MAINTENANCE & SAFETY

MAINTENANCE

- Place the the unit on a hard and flat surface

so that the system does not tilt.

- Do not expose the unit, batteries to humidity,

rain, sand or excessive heat caused by

heating equipment or direct sunlight.

- Do not cover the unit. Adequate ventilation

with a minimum gap of 15 cm between the

ventilation holes and surroundings surfaces

is necessary to prevent overheating.

- The mechanical parts of the set contain self-

lubricating bearings and must not be oiled or

lubricated

- To clean the unit, use a soft and dry cloth. Do

not use any cleaning agents containing

alcohol, ammonia, benzene or abrasives as

Environmental information

We have done our best to reduce the packaging and make it easy to separate into 3 materials:

Cardboard, Paper pulp and Expandable Polyethylene.

Your set consists of materials which can be recycled if disassembled by a specialized company.

Please observe the local regulations regarding the disposal of packaging, old batteries and old

equipment.

Should the system exhibit a problem, check the following before seeking service.

- 8 -

TROUBLESHOOTING

Possible Cause

Volume not adjusted

Power cord not securely

connected

Batteries dead/ incorrectly

inserted

Electrostatic discharge

Symptom

No Sound / Power

Display does not function

properly.

No reaction to operation of any

of the controls

Solution

Adjust the Volume level

Connect the AC power cord

properly

Insert new batteries correctly

Switch off and unplug the unit.

Connect it after a few seconds.

Do not open the set as there is a risk of electric shock.

If you are unable to remedy a problem by following these hints, consult your dealer or service center.

WARNING:

Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.

ENGLISH

Inhaltsverzeichnis

Andere Quadro Stereoanlage Handbücher

Quadro

Quadro MC-355 USB Bedienungsanleitung

Beliebte Stereoanlage Handbücher anderer Marken

LG CM3330B Bedienungsanleitung

Sony

Sony SS-CEP50 Bedienungsanleitung

Cetacea Sound

Cetacea Sound CVS-II Bedienungsanleitung

Aiwa

Aiwa XR-H66MD Bedienungsanleitung

Denon

Denon UCD-250 Bedienungsanleitung

Sanyo

Sanyo DC-MX41i Bedienungsanleitung

Sharp

Sharp CD-ES600V Bedienungsanleitung

Exibel

Exibel BDX600-UK Bedienungsanleitung

Sanyo

Sanyo DC-F320 Bedienungsanleitung

Philips

Philips FWM583X Bedienungsanleitung

Sharp

Sharp CD-C462 Bedienungsanleitung

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Bedienungsanleitung

Aiwa

Aiwa XR-EM70 Bedienungsanleitung

Cyrus

Cyrus Lyric Bedienungsanleitung

Philips

Philips MCM159/98 Bedienungsanleitung

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Bedienungsanleitung

RCA

RCA RS3965SB Bedienungsanleitung

Sharp

Sharp XL-UH240 Bedienungsanleitung