Qualstar Qi Bedienungsanleitung

Desktop LTO SAS

Qi Dimensions & System Requirements................ 3

Qi Features..................................................................4

Qi Unpacking/Contents..............................................5

Connecting the Qi to Your Computer.......................6

Powering on Your Qi.................................................. 7

Loading and Unloading the LTO cartridge

into Your Qi..................................................................8

Cleaning Your Qi.........................................................9

Appendix A: Qi Cartridge Compatibility.................10

Appendix B: Qi Error Codes and Messages..11–13

Product Warranty Caution.......................................14

Thank you for

purchasing your

Qi Desktop LTO

SAS!

With Qualstar's Qi Desktop

LTO SAS, your data is kept

secure on industry standard

LTO tape cartridges that

feature a shelf life of

30-plus years.

For more information,

please contact us at

support@Qualstar.com or

visit us at Qualstar.com

may be mentioned in this manual which

are the property of other companies.

Rev 102020

TABLE OF CONTENTS

DIMENSIONS & SYSTEM REQUIREMENTS

1) PC or server

2) Host bus adapter (HBA)

3) SAS cable

4) Backup software

Front view

10.2"

Side view

2.58"

Rear view

FEATURES

Front view

Rear view

Cartridge door

Cartridge unload

button

Ready light (green)

Encryption key

Fault light (amber)

SCD dot

Single character

display (SCD)

Mini-SAS SFF-8088 (F) port

On/Off switch

Power jack

Fan

12 4 5

2 43

6 7

UNPACK YOUR Qi DESKTOP LTO SAS

Kit Contents

• Qi Desktop LTO SAS with LTO-6, LTO-7, or LTO-8 drive

• Applicable data tape cartridge (optional)

• Power cord

• Quick-start guide

CONNECTING YOUR Qi

1) Before proceeding, ensure that your computer is powered off and the Qi’s power

switch is set to the off [o] position.

2) Connect a compatible SAS cable to a compatible SAS HBA in your computer and

the other end of the cable to the Qi.

3) Attach the AC power cord to the power

jack on the Qi.

Note: You must have a functioning

SAS HBA installed in your computer

before attaching the Qi.

POWERING ON YOUR Qi

1) Switch the power button located on the back of the unit to the on [–] position.

2) Wait for the ready light on front of the Qi to illuminate steady green.

3) Power on your computer.

Note: When initially powered on, the Qi will perform a hardware power on self-test

(POST). The POST checks to make sure that the LTO drive is functioning properly.

Wait until the single character display (SCD) presents a sustained green light to

indicate POST is complete. POST takes approximately 12 seconds.

Note: If the Qi is powered on with a tape cartridge installed, the system will perform

a much more intensive POST while the system verifies the integrity of the data on

the tape.

Note: Never leave a tape in the Qi with the unit powered off!

Note: Never remove power from the Qi during read, write, load, and unload activities.

LOADING THE LTO CARTRIDGE

1) Make sure the Qi is powered on and the green ready light is illuminated. Do not try

to insert a tape cartridge before the green ready light is on and steady.

2) Insert the cartridge in to the LTO drive. The cartridge goes in with the arrow

pointing upward.

3) Apply gentle pressure until the drive engages the cartridge.

4) When the cartridge is loaded, the green ready light will glow steady green.

UNLOADING THE LTO CARTRIDGE

1) If applicable, use the backup/archive application that you are using to unload the

LTO tape cartridge. This ensures that the application has finished writing data to the

tape before the cartridge is unloaded.

2) Once the backup/archive application has completed its unload process, check to

see if the cartridge has been unloaded. If the cartridge has not been unloaded,

press the blue unload button on the front of the drive. During the unload process,

the drive will complete all tasks, rewind the tape, and unload the cartridge. The

green ready light will flash during the unload process.

3) After the cartridge partially unloads, grasp the cartridge and remove from the drive.

CLEANING THE Qi LTO TAPE DRIVE

The Qi will alert you when it is necessary to clean the LTO tape drive.

The SCD will display a “C” to indicate a cleaning is required. To clean, insert a

cleaning cartridge into the LTO drive. Cleaning begins automatically. When the

process is finished, the cartridge is unloaded, and the SCD will be blank.

Note: The drive will automatically unload an expired cleaning cartridge.

APPENDIX A: CARTRIDGE COMPATIBILITY

Many tape drive and backup failures are caused by damaged or badly handled

tape media.

PROTECT YOUR MEDIA

• Keep the LTO cartridge in the case provided.

• Follow the temperature, humidity, and acclimatization

guidelines on the media packaging.

• Avoid dropping and/or rough handling,

as this is likely to damage the cartridge.

• Inspect it regularly for damage.

Write-protect

switch

LTO Tape Cartridges

Desktop SAS

LTO-7 Read Only

Desktop SAS

LTO-8 Read/Write

Read/Write

12 TB

(Ultrium 8)

6 TB

(Ultrium 7)

2.5 TB

(Ultrium 6)

1.5 TB

(Ultrium 5)

Read/Write

Desktop SAS

LTO-6

800 GB

(Ultrium 4)

Read/Write Read/Write Read Only

Inhaltsverzeichnis

Andere Qualstar Lagerung Handbücher

Qualstar

Qualstar XLS Series Bedienungsanleitung

Qualstar

Qualstar 9-Track Tape Drives 3400 Series Bedienungsanleitung

Qualstar

Qualstar RLS-4470 Betriebsanleitung

Qualstar

Qualstar XLS Series Technisches Handbuch

Qualstar

Qualstar Q40 Bedienungsanleitung

Qualstar

Qualstar Q80 Bedienungsanleitung

Qualstar

Qualstar Q1 Bedienungsanleitung

Qualstar

Qualstar 34XX Series Bedienungsanleitung

Qualstar

Qualstar XLS Series Betriebsanleitung

Qualstar

Qualstar Q24 Bedienungsanleitung

Qualstar

Qualstar HP9000 Bedienungsanleitung

Qualstar

Qualstar Q48 Bedienungsanleitung

Qualstar

Qualstar Qi Desktop LTO SAS Bedienungsanleitung

Qualstar

Qualstar 105X Bedienungsanleitung

Qualstar

Qualstar RLS-8350 Betriebsanleitung

Qualstar

Qualstar Q40 Bedienungsanleitung

Qualstar

Qualstar 1260 Bedienungsanleitung

Qualstar

Qualstar RLS-8350 Bedienungsanleitung

Qualstar

Qualstar RLS-8350 Betriebsanleitung

Qualstar

Qualstar XLS-810160 Technisches Handbuch

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung