Quandify CubicDetector QCD01 Bedienungsanleitung
Manual & Datasheet
CubicDetector
QCD01
Intelligent water detector
Detects and alerts for water leaks when in direct contact with water.
Measures temperature &humidity to warn from frozen pipes and mold risk
When used in conjunction with the CubicSecure, leaks can also trigger an
automatic water supply shut-off
Thank you for choosing the CubicDetector
The CubicDetector is an intelligent water detector that protects your home from water and extreme
temperature and humidity damages by measuring water flooding as well as room temperature and
humidity. The device should ideally be placed on strategic locations where water damages often
occur, e.g. near toilets, freezer, washing machine, air conditioners etc.
To maximize protection, the device can automatically shut off the water supply in case of a leakage
when used in conjunction with Quandify’s CubicSecure.
The CubicDetector is easy to set up, and it requires no previous experience. This guide will assist you
in getting your CubicDetector up and running.
Common installation areas
Near or under:
- Washing machine
- Dishwasher
- Toilet
- Bath
- Kitchen sinks
- Under or near water appliances
- Water heater or heating boiler
- Water tanks
- Water pumps
- Basements
- Air conditioners
- Refrigerator or freezers
Still stuck?
Feel free to reach out to us at https://quandify.com/support or visit our website for more
information: quandify.com.
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints. 2 of 7
INTRODUCTION
PACKAGE CONTENTS
●CubicDetector - 1x
●CR123A Lithium cell included - 1x
●Optional wall mount with self-adhesive backing - 1x
●Wall mount screws - 2x
●Leak sensing cable - 1x
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints. 3 of 7
INSTALLATION GUIDE
The wall mount and leak sensing cable is intended to be used for small spaces, such as under
appliances.
Installation steps:
1. Remove the top cover, by holding the
CubicDetector in your hand, while
twisting the cover counter clockwise.
2. Pull out the battery insulator, the LED
should start blinking blue.
3. Put back the top cover in place.
4. Follow instructions in the Quandify
app for Wi-Fi setup.
5. Only attach the wall mount if using
the leak sensing cable.
Internal view
Factory Reset:
1. Remove the top cover, by holding the
CubicDetector in your hand, while
twisting the cover counter clockwise.
2. Remove the battery.
3. Press and hold the reset button while
putting back the battery.
4. Release the button when the LED
starts blinking blue.
5. Attach the top cover, in reverse order
of removal. Turn the top cover until
the three notches align.
Wi-Fi Reset:
1. Remove the top cover, by holding the
CubicDetector in your hand, while
twisting the cover counter clockwise.
2. Press and hold the reset button for
10 seconds.
3. Release the reset button when the
LED turns purple.
4. The device will now be in pairing
mode and the LED should be blinking
blue.
5. Put back the top cover in place.
6. Follow instructions in the Quandify
app for Wi-Fi setup.
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints. 4 of 7
SPECIFICATIONS
Storage conditions:
5 °C ... 55 °C
Environment:
Indoor usage
Temperature range:
-25°C … 60°C
Temperature accuracy:
±1.5°C
Humidity range:
0 - 100 % RH (Relative Humidity)
Humidity accuracy
± 5 %
Sound level:
85 dB
Wi-Fi connectivity:
2.4 GHz Wi-Fi, (802.11bgn)
Cloud data resolution:
30 min
Weight:
80 grams (excluding packaging)
Dimensions:
Width: 67 mm, height: 67 mm, length 25 mm
Leak sensor cable:
1219 x 27 x 8 mm
Replaceable battery:
CR123A lithium cell, up to 3 years battery life*
Warranty:
2 years
*The battery life depends on the total duration of which the device is in active Wi-Fi mode and alarm
mode .
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints. 5 of 7
STATUS & ALARM INFORMATION
STATUSES
LED PATTERN
LE
D
MEANING
ACTION
OFF
-
Normal operation when powered
-
BLUE blinking
🔵
Device is in pairing mode and is visible on Wi-Fi
list
Pair using
smartphone app
PURPLE blinking
🟣
Device is performing an OTA update
Wait until the LED
stops blinking.
15s RED blinking
on wakeup
🔴
Device is in offline mode, Wi-Fi not used
Perform a Wi-Fi
reset to go back to
pairing mode
10s RED + BLUE
blinking
🔴
🔵
Device is in fatal fault mode
Perform a factory
reset or contact
support
1s RED blinking on
wakeup
🔴
Device is in low power mode, Wi-Fi disabled
Replace battery
Single PURPLE
blink
🟣
Device is booting up
-
ALARMS
ALARM
MEANING
ACTION
Continuously
beeping + RED
blinking
Water is detected in direct contact with the
device or leak sensor cable
Remove device from
water and check for
leaks
Single beep every
60s
Low battery warning (< 5%) and is in low
power mode
Replace battery
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints. 6 of 7
SERIAL NUMBER
You can find the 12 number serial number under the device, both in the form of a QR code, as well
as its digits written on the right side of “S/N”, depicted below:
MAINTENANCE & SERVICE
If a unit is faulty, please contact your authorized distributor for further assistance. All service must be
performed by an authorized Quandify service center. If external parts need to be replaced, only
original manufacturer spare parts should be used.
For more information or support, go to https://quandify.com/support.
Copyright © Quandify AB 2017-2023
All rights reserved
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints. 7 of 7
Inhaltsverzeichnis
Andere Quandify Sicherheitssensor Handbücher
