Quanmax QBOX-2020 Bedienungsanleitung
QBOX-2020
Fanless Box Computing
User's Manual
Version 1.0
Quanmax Inc.
User Manual
Copyright
©2009 by Quanmax Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval sys-
tem, translated into any language, or transmitted in any form or by any means such as
electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,
without prior written permission from Quanmax Inc.
Other brands and product names used herein are for identication purposes only and
may be trademarks of their respective owners.
Disclaimer
Quanmax Inc. shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
Quanmax Inc. makes no representation or warranty regarding the content of this manual.
Information in this manual had been carefully checked for accuracy;however, no guar-
antee is given as to the correctness of the contents. For continuing product improve-
ment, Quanmax Inc. reserves the right to revise the manual or make changes to the
specications of this product at any time without notice and obligation to any person or
entity regarding such change. The information contained in this manual is provided for
general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may
cause undesired operation.
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only
with the same or its equivalent as recommended by Quanmax Inc. Dispose
used battery according to the manufacturer's instructions.
Safety Information
Read the following precautions before setting up a Quanmax Product.
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected.
If possible, disconnect all power cables from the existing system before you add a
device.
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
•
Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
•
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
•
If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
Operation safety
•
Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
•
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualied service
technician or your retailer.
TABLE OF CONTENTS
1 Function Introduction ..............................................................................................5
1.1 Model Specications ........................................................................................5
1.2 QBOX-2020 Illustration <Mainboard, System> ................................................6
1.3 Memory Module Installation .............................................................................8
1.4 Power Supply ...................................................................................................9
1.5 RJ-45 LAN Connector LEDs ..........................................................................10
1.6 Connectors Guide .......................................................................................... 11
1.7 Jumpers Guide...............................................................................................18
2 System Installation ...............................................................................................20
2.1 System Introduction .......................................................................................20
2.2 Opening Chassis............................................................................................21
2.3 Installing Memory ...........................................................................................22
2.4 Installing HDD ................................................................................................23
2.5 Installing SSD.................................................................................................24
2.6 Installing MINI PCI Express Expansion Card (WiFi Module) .........................25
2.7 Installing CF Card ..........................................................................................26
3 BIOS .....................................................................................................................27
3.1 Entering The BIOS .........................................................................................27
3.2 Main ...............................................................................................................29
3.3 Advanced .......................................................................................................30
3.4 Boot................................................................................................................35
3.5 Security ..........................................................................................................36
3.6 Chipset ...........................................................................................................37
3.7 Power .............................................................................................................38
3.8 Exit .................................................................................................................40
4 System Resources.................................................................................................41
4.1 Watch Dog Timer Setting ...............................................................................41
4.2 AMI Post Code ...............................................................................................42
4.3 Resource List .................................................................................................46
5 Packing List ...........................................................................................................48
5.1 Packing List....................................................................................................48
5
English
1 Function Introduction
CPU • Intel Atom N270 1.6GHz Processor with 533MHz FSB
Chipset • Intel 945GSE + ICH7M
Memory • 1 x DDRII-533 SO-DIMM Up to 2GB
Display • Integrated Intel GMA-950 GFx Core in 945GSE MCH
ATA • 1 x Serial ATA port with 150MB/s HDD transfer rate
LAN Chipset • 2 x Intel 82574L Gigabit Ethernet
Watchdog • 1 ~ 255 level reset
Serial Port • Support 2 x RS-232 ports and 1 x RS232/422/485
USB Port • 4 x USB 2.0 ports
LAN • 2 x RJ45 ports for GbE
Video Port • 1 x DVI-I female connector for DVI-D and VGA Output
GPIO Port • Support 4 in and 4 out GPIO ports (share with 1 x RS232)
Audio • Mic-in/Line-out
Expansion Bus • 1 x Mini-card slot
Storage • 1 x 2.5" drive bay for SATA Type Hard Disk Drive / SSD
Qualication • CE, FCC
1.1 Model Specifications
6
English
Operating Temp. • -20 ~ -60°C, ambient w/ air
Storage Temp. • -40 ~ 85°C
Relative Humidity • 10 ~ 95% @ 40°C (non-condensing)
Vibration • MIL-STD-810F, Method 514.5, Procedure 1, Category 4
Shock & Crash • Operating 20G (11ms), Non-Operating 60G with HDD
• Operating 40G (11ms), Non-Operating 80G with SSD
• Crash 100G (11ms)
Power Input • DC 12V Input
Construction • Aluminum alloy
Mounting • Supports both of wall-mount/VESA-mount
Weight • 960g (barebone)
Dimensions • 182(L) x 167.6(W) x 35(H) mm
1.2 QBOX-2020 Illustration
Mainboard
7
English
System
182
195,64
209,64
60
120
167,6
34,95
41,6
8
English
1.3 Memory Module Installation
The QBOX-2020 provide one 200pins SODIMM slot for DDR2 533MHz SDRAM memo-
ry modules and supports memory sizes up to 2GB.
These DIMM slots are inteded for memory modules.
DDR2 SO-DIMM Slot
200-pin, 1.8V
Installing Memory Module
1. Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with the key on the
slot and insert the DIMM into the slot at 45-degree angle.
2. Push the DIMM gently forwards until the slot levers click and lock the DIMM in place.
Follow the same procedures to install the second DIMM if necessary.
3. To uninstall the DIMM, ip the slot levers outwards and the DIMM will be released
instantly.
Important
You can barely see the golden nger if the DIMM is properly inserted in the DIMM slot.
9
English
1.4 Power Supply
5V/12V HDD Power Connector : JPWR1
This connector provides power to the hard disk drives.
12V System Power Connector : PWR1
This connector provides power to the hard disk drives.
Important
Power supply of 200watts (and above) is highly recommended for system stability.
10
English
USB Port
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,
mouse, or other USB-compatible devices.
LAN
The standard RJ-45 LAN jack is for connection to the local Area Network (LAN). You
can connect a network cable to it.
1.5 RJ-45 LAN Connector LEDs
Speed IndicatorActivity Indicator
Left LED Right LED
Active LED 100M/1000 Speed LED
LED Color Yellow Green/Orange
10M Cable
Plug-in
No Transmission OFF OFF
Transition Yellow (Blinking) OFF
100M Cable
Plug-in
No Transmission OFF Green (Lighting)
Transition Yellow (Blinking) Green (Lighting)
1000M Cable
Plug-in
No Transmission OFF Orange (Lighting)
Transition Yellow (Blinking) Orange (Lighting)
In S3/S4/S5 standby State Green (Lighting) OFF
Inhaltsverzeichnis
