Quanmax ECX-BW00 Bedienungsanleitung

ECX

BW00 User’s Manual

ECX-BW00

Single Board Computer in Intel®ECX FormFactor

with Intel®Braswell SoC Quad Core Processor,

Celeron® N3160

User’s Guide

ECX

BW00 User’s Manual

Contact Info: Quanmax Inc.

4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District,

Taipei 114Taiwan

Tel: +886-2-2799-2789

Fax:+886-2-2799-7399

Visit our site at: www.quanmax.com

Theinformationin this user’sguide isprovided for referenceonly.Quanmax does notassume any

liabilityarising outof the application oruseof the informationor productsdescribed herein. Thisuser’s

guide may contain or referenceinformation and productsprotected bycopyrightsor patentsanddoes

not convey anylicense under the patent rightsof Quanmax, northe rights of others.

Quanmax is a registeredtrademark ofQuanmax. All trademarks, registered trademarks, andtrade

user’sguide containsinformation proprietary toQuanmax. Customers may reprintand use this user’s

guide in other publications.Customers may alter thisuser’sguide and publish it onlyafter they remove

theQuanmax name, cover,andlogo.

Quanmax reserves the right tomake changeswithoutnoticeinproductor componentdesignas

warranted byevolutionin user needs orprogressin engineering or manufacturing technology.

Changeswhich affectthe operation oftheunitwill bedocumentedin thenext revisionof this user’s

guide.

Content

ECX

BW00 User’s Manual

Content

Content......................................................................................................................................3

Figures ......................................................................................................................................5

Tables........................................................................................................................................6

Safety Instructions...................................................................................................................8

　Before You Begin....................................................................................................8

　When Working Inside a Computer.......................................................................8

　Preventing Electrostatic Discharge......................................................................9

Preface....................................................................................................................................11

　How to Use This Guide........................................................................................11

　Unpacking..............................................................................................................11

　Regulatory Compliance Statements ..................................................................11

　Warranty Policy.....................................................................................................12

　Maintaining Your Com puter.................................................................................13

Chapter 1 Introduction.......................................................................................................16

　Over view ................................................................................................................16

　Product Specifications..........................................................................................17

　System Block Diagram.........................................................................................18

　Mechanical Dimensions.......................................................................................19

Chapter 2 Hardware Settings ...........................................................................................20

　Over view ................................................................................................................20

　Jumper Settings and Pin Definitions..................................................................21

Jumper Settings..................................................................................................22

Internal Connector Pin Assignment.................................................................24

Rear Panel Pin Ass ignments ............................................................................33

Chapter 3 System Installation...........................................................................................36

　Memory Module Installation................................................................................36

Chapter 4 AMI BIOS Setup...............................................................................................38

　Over view ................................................................................................................38

　Main Menu .............................................................................................................39

　Advanced Menu....................................................................................................40

　Power Menu...........................................................................................................53

　Security Menu .......................................................................................................54

　Boot Menu..............................................................................................................55

　Save & Exit Menu .................................................................................................56

Content

ECX

BW00 User’s Manual

Chapter 5 Driver Installation.............................................................................................58

Appendix A DIO (Digital I/O) Sam ple Code....................................................................59

Appendix B WatchDog Timer Sample Code.....................................................................62

Figures

ECX

BW00 User’s Manual

Figures

Figure 1 Block Diagram........................................................................................18

Figure 2 Mechanical Dimensions........................................................................19

Figure 3 Jumper Connector.................................................................................20

Figure 4 Jumper and Connector Locations.......................................................21

Figure 5 Rear Panel IO.........................................................................................33

Figure 6 Align the SO-DIMM Memory Module with the onboard socket......36

Figure 7 Press down on the SO-DIMM Memory Module to lock itin place.37

Tables

ECX

BW00 User’s Manual

Tables

Table 1 ECX-BW00 Specification........................................................................17

Table 2 Jumper List...............................................................................................22

Table 3 JP1 RTC Reset Selection ......................................................................22

Table 4 JP2 Backlight Enable Selection............................................................22

Table 5 JP4 Panel & Backlight Power Selection ..............................................22

Table 6 JP6 USB Power Selection .....................................................................23

Table 7 JP7 ME F/W Selection............................................................................23

Table 8 JP8 Keyboard Lock Selection...............................................................23

Table 9 JP9 AT / ATX Power Mode Selection...................................................23

Table 10 BAT1 CR2032 Battery Power Input Wafer........................................25

Table 11 CN1 DC12V Power Input Wafer..........................................................25

Table 12 CN2 Micro-SD Card Cage ...................................................................25

Table 13 CN3 eDP Panel Connector..................................................................26

Table 14 CN4 PS/2 Keyboard / Mouse Wafer..................................................26

Table 15 CN6 VGAHeader..................................................................................26

Table 16 CN7 SIM Interface Wafer for MPCIE1 ...............................................27

Table 17 CN10 USB2.0 Port DN_1, DN_2 Pin Header...................................27

Table 18 CN11 Digital Input / Output Wafer ......................................................27

Table 19 CN12 HDD Power Output Wafer........................................................27

Table 20 CN15 Audio Input / Output Pin Header..............................................28

Table 21 CN16 Left Channel 3W Audio AMP Output Wafer ...........................28

Table 22 CN19 Right Channel 3W Audio AMP Output Wafer ........................28

Table 23 CN20 COM1 RS-232/422/485 Port Wafer........................................28

Table 24 CN21 COM2 RS-232/422/485 Port Wafer........................................29

Table 25 CN22~CN25 COM3~6 RS-232 Port Wafer.......................................29

Table 26 CN27 MPCIE Activity LED Pin Header..............................................29

Table 27 FAN1 DC5V FAN Wafer .......................................................................29

Table 28 FP1 Front Panel 1 Pin Header............................................................30

Table 29 FP2 Front Panel 2 Pin Header............................................................30

Table 30 MPCIE1 Mini-PCI Express v1.2 Socket (Full Size) .........................31

Table 31 MSATA1 Serial ATA Port 1 mSATASocket (Full Size, optional for

MPCIE2) .........................................................................................................32

Table 32 SATA1 Serial ATA Port 0 Connector...................................................32

Table 33 SATA2 Serial ATA Port 1 Connector (default unmounted)..............32

Tables

ECX

BW00 User’s Manual

Table 34 Rear Panel Connector Lis t...................................................................33

Table 35 CN13 GbE LAN1 RJ-45 Connector....................................................33

Table 36 CN14 GbE LAN2 RJ-45 Connector....................................................33

Table 37 CN8 USB3.0 Port-0,1 Type-AConnector..........................................34

Table 38 CN9 USB3.0 Port-2,3 Type-AConnector..........................................34

Table 39 CN17 DisplayPort Connector..............................................................34

Table 40 CN18 HDMI Connector........................................................................35

Table 41 ECX-BT00 BIOS Main Menu...............................................................39

Table 42 Ad vanced Menu.....................................................................................40

Table 43 Advanced Menu – Display Configuration..........................................41

Table 44 Advanced Menu – Super IO Configuration.......................................42

Table 45 Advanced Menu – Super IO Configuration – Serial Port 1

Configuration..................................................................................................42

Table 46 Advanced Menu – Super IO Configuration – Serial Port 2

Configuration..................................................................................................43

Table 47 Advanced Menu – Super IO Configuration – Serial Port 3

Configuration..................................................................................................44

Table 48 Advanced Menu – Super IO Configuration – Serial Port 4

Configuration..................................................................................................45

Table 49 Advanced Menu – Super IO Configuration – Serial Port 5

Configuration..................................................................................................46

Table 50 Advanced Menu – Super IO Configuration – Serial Port 6

Configuration..................................................................................................47

Table 51 Advanced Menu – CPU Chipset Configuration................................48

Table 52 Advanced Menu –SATA Configuration...............................................49

Table 53 Advanced Menu – USB Configuration...............................................50

Table 54 Advanced Menu – DIO Configuration................................................51

Table 55 Advanced Menu – H/W Monitor..........................................................52

Table 56 Power Configuration .............................................................................53

Table 57 Security Menu........................................................................................54

Table 58 Boot Menu..............................................................................................55

Table 59 Save & Exit Menu..................................................................................56

Safety Instructions

ECX

BW00 User’s Manual

Safety Instructions

Before You Begin

Before handling the product, read the instructions and safety guidelines on the

following pages to prevent damage to the product and to ensure your own personal

safety. Refer to the “Advisories” section in the Preface for advisory conventions used

in this user’s guide, including the distinction between Warnings, Cautions, Important

Notes, and Notes.

Always use caution when handling/operating a computer. Only qualified,

experienced, authorized electronics service personnel should access the

interior of a computer. The power supplies produce high voltages and

energy hazards, which can cause bodily harm.

Use extreme caution when installing or removing components. Refer to the

installation instructions in this user’s guide for precautions and procedures.

If you have any questions, please contact Quanmax Post-Sales Technical

Support.

WARNING

High voltages are present inside the chassis when the unit’s power cord is

plugged into an electrical outlet. Turn off system power, turn off the power

supply, and then disconnect the power cord from its source before

removing the chassis cover. Turning off the system power switch does not

remove power to components.

When Working Inside a Computer

Before taking covers off a computer, perform the following steps:

1. Turn off the computer and any peripherals.

2. Disconnect the computer and peripherals from their power sources or

subsystems to prevent electric shock or system board damage. This does not

apply when hot swapping parts.

Safety Instructions

ECX

BW00 User’s Manual

3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the

following page.

4. Disconnect any telephone or telecommunications lines from the computer.

In addition, take note of these safety guidelines when appropriate:

To help avoid possible damage to system boards, wait five seconds after

turning off the computer before removing a component, removing a system

board, or disconnecting a peripheral device from the computer.

When you disconnect a cable, pull on its connector or on its strain-relief loop,

not on the cable itself. Some cables have a connector with locking tabs. If you

are disconnecting this type of cable, press in on the locking tabs before

disconnecting the cable.As you pull connectors apart, keep them evenly

aligned to avoid bending any connector pins.Also, before connecting a cable,

make sure both connectors are correctly oriented and aligned.

CAUTION

Do not attempt to service the system yourself except as explained in this

user’s guide. Follow installation and troubleshooting instructions closely.

Preventing Electrostatic Discharge

Static electricity can harm system boards. Perform service at an ESD workstation

and follow proper ESD procedure to reduce the risk of damage to components.

Quanmax strongly encourages you to follow proper ESD procedure, which can

include wriststraps and smocks, when servicing equipment.

You can also take the following steps to prevent damage from electrostatic

discharge (ESD):

When unpacking a static-sensitive component from its shipping carton, do not

remove the component’s antistatic packing material until you are ready to install

the component in a computer. Just before unwrapping the antistatic packaging,

be sure you are at an ESD workstation or grounded. This will discharge any

static electricity that may have built up in your body.

Safety Instructions

ECX

BW00 User’s Manual

When transporting a sensitive component, first place it in an antistatic container

or packaging.

Handle all sensitive components at an ESD workstation. If possible, use

antistatic floor pads and workbench pads.

Handle components and boards with care. Don’t touch the components or

contacts on a board. Hold a board by its edges or by its metal mounting bracket.

Do not handle or store system boards near strong electrostatic, electromagnetic,

magnetic, or radioactive fields.

Inhaltsverzeichnis

Andere Quanmax Einplatinencomputer Handbücher

Quanmax

Quanmax ECX-APL0 Series Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung