QUANTA D51BV-2U Bedienungsanleitung

Version: 1.0

QuantaGrid Series

D51B-/D51BV-2U

Full-Featured Energy Efficient 2-Way Server

Energy Efficient 2-Socket GPU/ Xeon Phi™ Server

User’s Guide

trations and software, is protected under international copyright laws, with all rights

reserved. Neither this technical guide, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer. All trademarks and

logos are copyrights of their respective owners.

Version 1.0 / November 28, 2014

Disclaimer

The information in this document is subject to change without notice. The manufacturer

makes no representations or warranties with respect to the contents hereof and specifi-

cally disclaims any implied warranties of merchantability or fitness for any particular pur-

pose. Furthermore, the manufacturer reserves the right to revise this publication and to

make changes from time to time in the content hereof without obligation of the manufac-

turer to notify any person of such revision or changes.

For the latest information and updates please see www.QuantaQCT.com

All the illustrations in this technical guide are for reference only and are subject to change

without prior notice.

TABLE OF CONTENT

About the System

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

A Tour of the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

System Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

System Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

LED Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Front Control Panel LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

LAN Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

HDD LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

BIOS

BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Setup Page Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Entering BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Keyboard Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Menu Selection Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Server Platform Setup Utility Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Main Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Advanced Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

IntelRCSetup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Server Management Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Boot Options Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Security Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Exit Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

TABLE OF CONTENT

III

Loading BIOS Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

BIOS Update Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

BIOS Update Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

AFULNX: v2.39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

ME Region Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

BIOS Setting Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

BIOS Revision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Clear CMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Clear Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Server Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Console Redirection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Serial Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Keystroke Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Interface to Server Management (Optional) . . . . . . . . . . . . . . . . . . . . 2-20

Network BIOS Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

PXE Boot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Checkpoints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Debug Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

BMC

Server Management Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Server System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

BMC Key Features and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Front Panel User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

ID Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

LAN Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

TABLE OF CONTENT

Session and User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Serial Over LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Time Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

SEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Platform Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Platform Event Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

BMC Firmware Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

DOS Recovery Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

WebUI Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

BMC Recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Recovery Process in DOS System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Recovery Process in Linux System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Recovery Process in Windows System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Regulatory and Compliance Information

Electromagnetic Compatibility Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

FCC Verification Statement (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Europe (CE Declaration of Conformity) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

VCCI (Japan). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

BSMI (Taiwan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Regulated Specified Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Restriction of Hazardous Substances (RoHS) Compliance . . . . . . . . . . 4-3

End of Life / Product Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Product Regulatory Compliance

Markings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

CONVENTIONS

Conventions

Several different typographic conventions are used throughout this manual. Refer to the

following examples for common usage.

Bold type face denotes menu items, buttons and application names.

Italic type face denotes references to other sections, and the names of the folders, menus,

programs, and files.

<Enter> type face denotes keyboard keys.

.Warning information appears before the text it references and should not be ignored as

the content may prevent damage to the device.

WARNING!

Warning information appears before the text it references and should not be ignored as the

content may prevent damage to the device.

CAUTION!

CAUTIONS APPEAR BEFORE THE TEXT IT REFERENCES, SIMILAR TO NOTES AND WARNINGS. CAUTIONS, HOWEVER,

APPEAR IN CAPITAL LETTERS AND CONTAIN VITAL HEALTH AND SAFETY INFORMATION.

Note:

Highlights general or useful information and tips.

PRECAUTIONARY MEASURES

Precautionary Measures

Read all caution and safety statements in this document before performing any of the

instructions. To reduce the risk of bodily injury, electrical shock, fire, and equipment dam-

age, read and observe all warnings and precautions in this chapter before installing or

maintaining your system. To avoid personal injury or property damage, before you begin

installing the product, read, observe, and adhere to all of the following instructions and

information. The following symbols may be used throughout this guide and may be

marked on the product and / or the product packaging.

Safety Instructions about your system

In the event of a conflict between the information in this guide and information provided

with the product or on the website for a particular product, the product documentation

takes precedence.

Your system should be integrated and serviced only by technically qualified persons.

You must adhere to the guidelines in this guide and in related chapters to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products / compo-

nents will void the UL Listing and other regulatory approvals of the product, and may

result in noncompliance with product regulations in the region(s) in which the product is

sold.

Table 1: Warning and Cautions

CAUTION Indicates the presence of a hazard that may cause minor personal injury or prop-

erty damage if the CAUTION is ignored.

WARNING Indicates the presence of a hazard that may result in serious personal injury if the

WARNING is ignored.

Indicates potential hazard if indicated information is ignored.

Indicates shock hazards that result in serious injury or death if safety instructions

are not followed.

Indicates hot components or surfaces.

Indicates do not touch fan blades, may result in injury.

Remove the system from the rack to disconnect power system. (Only for certain

models)

PRECAUTIONARY MEASURES

VII

Intended Application Uses

This product was evaluated as Information Technology Equipment (ITE), which may be

installed in offices, schools, computer rooms, and similar commercial type locations. The

suitability of this product for other product categories and environments (such as medical,

industrial, residential, alarm systems, and test equipment), other than an ITE application,

may require further evaluation.

Site Selection

The system is designed to operate in a typical office environment. Choose a site that is:

Clean, dry, and free of airborne particles (other than normal room dust).

Well-ventilated and away from sources of heat including direct sunlight and radia-

tors.

Away from sources of vibration or physical shock.

Isolated from strong electromagnetic fields produced by electrical devices.

In regions that are susceptible to electrical storms, we recommend you plug your

system into a surge suppressor and disconnect telecommunication lines to your

modem during an electrical storm.

Provided with a properly grounded wall outlet.

Provided with sufficient space to access the power system, because they serve as the

product's main power disconnect.

Provided with either two independent DC power system or two independent phases

from a single power system.

The enclosure is designed to carry only the weight of the system sled. Do not use

this equipment as a workspace. Do not place additional load onto any equipment

in this system.

Indicates two people are required to safely handle the system.

Restricted Access Location: The system is intended for installation only in a

Server Room or Computer Room where both these conditions apply:

access can only be gained by SERVICE PERSONS or by USERS who have been

instructed about the reasons for the restrictions applied to the location and

about any precautions that shall be taken; and

access is through the use of a TOOL or lock and key, or other means of security,

and is controlled by the authority responsible for the location.

Table 1: Warning and Cautions (Continued)

PRECAUTIONARY MEASURES

VIII

Equipment Handling Practices

Reduce the risk of personal injury or equipment damage:

Conform to local occupational health and safety requirements when moving and

lifting equipment.

Use mechanical assistance or other suitable assistance when moving and lifting

equipment.

To reduce the weight for easier handling, remove any easily detachable compo-

nents.

Never lift or move your system soley by the handle on the component.

Power and Electrical Warnings

System Access Warnings

CAUTION!

MAKE SURE THE SYSTEM IS REMOVED FROM THE RACK BEFORE SERVICING ANY NON-HOT PLUG COMPONENTS.

THE BUS BAR CLIPS MUST BE DISCONNECTED FROM THE POWER SYSTEM INORDER TO FULLY SEPARATE THE SYS-

TEM FROM THE POWER SOURCE.

CAUTION!

TOAVOID RISK OF ELECTRIC SHOCK, DISCONNECT ALL CABLING FROM THE SYSTEM AND REMOVE THE SYSTEM

FROM THE RACK.

CAUTION!

TOAVOID PERSONAL INJURY OR PROPERTY DAMAGE, THE FOLLOWING SAFETY INSTRUCTIONS APPLY WHENEVER

ACCESSING THE INSIDE OF THE PRODUCT:

Disconnect from the power source by removing the system from the rack.

Disconnect all cabling running into the system.

Retain all screws or other fasteners when servicing. Upon completion servicing, sercure

with original screws or fasteners.

CAUTION!

IFTHE SERVER HAS BEEN RUNNING, ANY INSTALLED HDD MODULES MAY BE HOT.

CAUTION!

UNLESS YOU ARE ADDING OR REMOVING AHOT-PLUG COMPONENT, ALLOW THE SYSTEM TO COOL BEFORE SER-

VICING.

CAUTION!

TOAVOID INJURY DO NOT CONTACT MOVING FAN BLADES. IFYOUR SYSTEM IS SUPPLIED WITH AGUARD OVER THE

FAN, DO NOT OPERATE THE SYSTEM WITHOUT THE FAN GUARD IN PLACE.

PRECAUTIONARY MEASURES

Rack Mount Warnings

The following installation guidelines are required by UL for maintaining safety compliance

when installing your system into a rack.

The equipment rack must be anchored to an unmovable support to prevent it from tip-

ping when your system or piece of equipment is extended from it. The equipment rack

must be installed according to the rack manufacturer's instructions.

Install equipment in the rack from the bottom up, with the heaviest equipment at the bot-

tom of the rack.

Extend only one piece of equipment from the rack at a time.

You are responsible for installing a main power disconnect for the entire rack unit. This

main disconnect must be readily accessible, and it must be labeled as controlling power to

the entire unit, not just to the system(s).

To avoid risk of potential electric shock, a proper safety ground must be implemented for

the rack and each piece of equipment installed in it.

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the oper-

ating ambient temperature of the rack environment may be greater than room ambient.

Therefore, consideration should be given to installing the equipment in an environment

compatible with the maximum ambient temperature (Tma) specified by the manufac-

turer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount

of air flow required for safe operation of the equipment is not compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a haz-

ardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the equipment

to the supply circuit and the effect that overloading of the circuits might have on over-cur-

rent protection and supply wiring. Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections

to the branch circuit (e.g. use of power strips).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere QUANTA Server Handbücher

QUANTA

QUANTA STRATOS S200 Series S200-X12TS Kurzanleitung

QUANTA

QUANTA QuantaGrid S31A-1U Bedienungsanleitung

QUANTA

QUANTA STRATOS S810 Series Bedienungsanleitung

QUANTA

QUANTA S100-L11SL Bedienungsanleitung

QUANTA

QUANTA Rackgo X Series F03A Kurzanleitung

QUANTA

QUANTA STRATOS S210 Series S210-X2A2J Kurzanleitung

QUANTA

QUANTA QSSC-S99K 2U Bedienungsanleitung

QUANTA

QUANTA QuantaGrid Series Bedienungsanleitung

QUANTA

QUANTA QSSC-980 Bedienungsanleitung

QUANTA

QUANTA D51BP-1U Bedienungsanleitung

QUANTA

QUANTA STRATOS S210 Series S210-X12RS Kurzanleitung

QUANTA

QUANTA S100-L11D Bedienungsanleitung

QUANTA

QUANTA Stratos S810-X52L Bedienungsanleitung

QUANTA

QUANTA S200-X12TS Bedienungsanleitung

QUANTA

QUANTA STRATOS S210 Series S210-X12MS Kurzanleitung

QUANTA

QUANTA QuantaGrid Q71L-4U Bedienungsanleitung

QUANTA

QUANTA W Mainboard Series S210-MBT2W Kurzanleitung

QUANTA

QUANTA STRATOS S210 Series S210-X12RS Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung