Quantum NDX Series Bedienungsanleitung

www.quantum.com

NDX NAS 1U Rack

Quantum NDX NAS 1U Rack

Installation Guide

This installation guide provides basic installation and configuration

instructions for the NDX NAS 1U Rack.

This instruction uses the following conventions:

Note: Notes emphasize important information related to the main topic.

Caution: Cautions indicate potential hazards to equipment and are

included to prevent damage to equipment.

WARNING: Warnings indicate potential hazards to personal safety and

are included to prevent injury.

Contents

Preparing for Setup................................2

Precautions.............................................2

Rail Kit Contents.....................................3

Rack Installation.....................................2

Rack Mounting Instructions...............7

Identifying the Sections of the Rack

Rails ....................................................7

Installing the Inner Rails on the NDX

1U NAS Server ....................................8

Installing the Outer Rails on the Rack8

Installing the NDX 1U NAS Server into

a Rack ...............................................11

Installing the NDX 1U NAS Server into

a Telco Rack ......................................12

Removing Server from the Rack.......12

2 Preparing for Setup

NDX NAS 1U Rack Installation Guide

Preparing for Setup

The rail kit (CSE-PT52L) ships in a box that should include the following:

• Two sets of rail assemblies

• Six rail mounting brackets

• Mounting screws—needed to install the system into most standard racks

Note: To install the rails, you will need a Phillips screwdriver.

Due to the variability in rack types, you may need to use the mounting hardware that

came with your rack or you may need to contact your rack vendor to procure additional

mounting hardware.

Read this section in its entirety before you begin the installation procedure outlined in

the sections that follow.

Precautions

Review the following precautions prior to setup.

Caution: Slide/rail mounted equipment is not to be used as a shelf or work space.

Rack Precautions • Ensure that the leveling jacks on the bottom of the rack are fully extended to the

floor with the full weight of the rack resting on them.

• In a single rack installation, stabilizers should be attached to the rack.

• In multiple rack installations, the racks should be coupled together.

• Always make sure the rack is stable before extending a component from the rack.

• Extend only one component at a time - extending two or more simultaneously may

cause the rack to become unstable.

General Precautions • Determine the placement of each component in the rack before you install the rails.

• Install the heaviest server components on the bottom of the rack first, and then

work up.

• Use a regulating uninterruptible power supply (UPS) to protect the servers and

switches from power surges, voltage spikes and to keep your system operating in

case of a power failure.

Rail Kit Contents 3

NDX NAS 1U Rack

• Always keep the rack's front door and all panels and components closed when not

servicing to maintain proper cooling.

• Disconnect all power cords before servicing.

Rail Kit Contents

The following pictures depict the contents of the rail kit, including rails, screws,

brackets, and nuts.

Figure 1 Rails

4 Rail Kit Contents

NDX NAS 1U Rack Installation Guide

Figure 2 Screws

Rail Kit Contents 5

NDX NAS 1U Rack

Figure 3 Brackets

6 Rail Kit Contents

NDX NAS 1U Rack Installation Guide

Figure 4 Nuts

Rack Installation 7

NDX NAS 1U Rack

Rack Installation

Rack Mounting

Instructions

This section provides information on installing the NDX NAS 1U server into a rack with

the CSE-PT52L rail kit. There are a variety of rack units on the market, which may mean

the assembly procedure will differ slightly. You should also refer to the installation

instructions that came with the rack unit you are using.

Note: This rail will fit a rack between 26" and 33.5" deep.

Identifying the Sections

of the Rack Rails

The CSE-PT52L rail kit package includes two rack rail assemblies in the rack mounting kit.

Each assembly consists of two sections: a fixed inner rail that secures directly to the side

of the NDX 1U NAS server, and a fixed outer rail that secures directly to the rack itself.

Figure 5 Rack Rail Sections

8 Rack Installation

NDX NAS 1U Rack Installation Guide

Installing the Inner Rails

on the NDX 1U NAS

Server

1Place one of the inner rails on one side of the NDX 1U NAS server aligning the hooks

on the side of the NDX 1U NAS server with the mounting holes in the rail. Make sure

the inner rail faces outward, as illustrated.

Note: The front inner rail is pre-installed on the NDX 1U NAS server.

2Slide the inner rail forward so that the rail fits securely into the 4 hooks on the side

of the NDX NAS 1U Rack server.

3Secure the inner rail to the NDX NAS 1U Rack server with one screw as illustrated in

Figure 6.

4Repeat steps 1-2 for the remaining inner rail.

Figure 6 Inner Rail Installation

Installing the Outer

Rails on the Rack

1Attach the shorter outer rail to the outside of the longer outer rail. You must seat

the pin on the rear outer rail with the slide opening in front outer rail. Also, both

bracket ends must face the same direction.

2Adjust both the shorter and longer brackets to the proper length so that the rail fits

snugly into the rack.

3Secure the long rail to the front side of the rack with two M5 screws, top and

bottom holes and the short rail to the rear side of the rack with two M5 screws.

4If the rack does not have threaded holes, install a clip nut or a cage nut in the back

side of the rail and use the cage nut/clip nut screws to secure the unit into the rack

(see Figure 7 below)

5Repeat steps 1-4 for the remaining outer rail.

Rack Installation 9

NDX NAS 1U Rack

Figure 7 Outer Rail Installation

Table 1 Type of Rail Nuts

10 Rack Installation

NDX NAS 1U Rack Installation Guide

Figure 8 Outer Rail Installation

Diagram

Andere Handbücher für NDX Series

Inhaltsverzeichnis

Andere Quantum Server Handbücher

Quantum

Quantum Scalar i6000 Bedienungsanleitung

Quantum

Quantum StorNext M440 Bedienungsanleitung

Quantum

Quantum DXi6900 Bedienungsanleitung

Quantum

Quantum NDX Series Bedienungsanleitung

Quantum

Quantum StorNext M660 Bedienungsanleitung

Quantum

Quantum NDX Series Bedienungsanleitung

Quantum

Quantum NDX Series Bedienungsanleitung

Quantum

Quantum NDX Series Bedienungsanleitung

Quantum

Quantum Snap! Server 4000 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung