Quatech QS-PCIE-100 Bedienungsanleitung

May/07 MN2000000068

QS-PCIE-100

User Manual

Ver. 1.00

All brand names and trademarks are properties of their

respective owners.

May/07 MN2000000068

Features and Benefits

Features zCompliant with PCI Express Base Specification

1.0a

zSupports 4 x UART serial port

zBuilt-in 16C550 compatible UART with 16 byte

transmit-receive FIFO

zData transfer rate up to 115200bps

Bus zPCI-Express X1

Connectors z4 x DB9 male serial connectors

Package Contents

z1 x QS-PCIE-100 Card

z1 x Bracket with two DB9 male serial ports

z1 x Driver CD

System Requirements

zWindows® 2000/XP/Server 2003/Vista

zPCI Express-enabled system with an available PCI Express slot

May/07 MN2000000068

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with

the selected PCIe slot on the motherboard. Push the board down

firmly.

5. Connect the system power source to the board’s power connector.

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with driver

installation.

For Windows® 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes, then click

Next.

May/07 MN2000000068

4. Insert the Driver CD, type in the following path

D:\Drivers\PCIExpress\QS-PCIE-100\2000, then click OK.

(Change D: to match your CD-ROM driver letter)

5. Click Next and Finish.

6. Restart Windows to complete the installation.

For Windows® XP

1. At the Found New Hardware Wizard, select Install from a list

or specific location (Advanced), then click Next.

2. Insert the Driver CD, check Include this location in the search,

uncheck the other box, type in the following path

D:\Drivers\PCIExpress\QS-PCIE-100\XP, then click OK.

(Change D: to match your CD-ROM drive letter)

3. If the Hardware Installation window pops up, click Continue

Anyway, then Finish. Our driver has been thoroughly tested for

stability and compatibility.

4. Repeat steps 1-3 five more times.

5. Restart Windows to complete the installation.

For Windows® Server 2003

1. At the Found New Hardware Wizard, select Install from a list

May/07 MN2000000068

or specific location (Advanced), then click Next.

2. Insert the Driver CD, check Include this location in the search,

uncheck the other box, type in following path

D:\Drivers\PCIExpress\QS-PCIE-100\2003, then click OK.

(Change D: to match your CD-ROM drive letter)

3. If the Hardware Installation window pops up, click Continue

Anyway, then Finish. Our driver has been thoroughly tested for

stability and compatibility.

4. Repeat steps 1-3 five more times.

5. Restart Windows to complete the installation.

For Windows® Vista

1. At the Found New Hardware Wizard, select Locate and install

driver software (recommended).

2. Click on I don’t have the disc. Show me other options.

3. Select the option Browse my computer for driver software

(advanced).

4. Insert the driver CD, check Include subfolders, type in

D:\Drivers\PCIExpress\QS-PCIE-100\Vista32, then click Next.

(Change D: to match your CD-ROM drive letter)

5. If the system prompts the user informing the drivers are not

May/07 MN2000000068

signed, select the option Install this driver software anyway.

6. Click on Close to complete the driver installation.

To Verify Windows® Driver Installation

1. Right click My Computer, then click Manage. Click Device

Manager.

2. Click on the +(plus sign) in front of Ports(COM & LPT), four

MosChip PCI Serial Port … should be displayed.

3. Double click Multifunction adapters, MosChip PCI Multi-I/O

Controller should be displayed.

Change COM Port Number

Some serial devices need a specific COM port in order to work. If your

serial device works properly, do not change this setting.

For Windows® 2000/XP/Server 20003/Vista Installation

1. From the Device Manager window double click Ports(COM &

LPT), then double click the MosChip PCI Serial Port you want

to change.

2. Click the Settings tab and click Advanced.

3. Click the down arrow that is next to the COM Port Number box,

select a COM port that is not in use, then click OK.

May/07 MN2000000068

4. Click OK, then close Device Manager to save the changes.

Follow steps 1-4 again to change the other three serial ports if

needed.

Inhaltsverzeichnis

Andere Quatech Computerhardware Handbücher

Quatech

Quatech MPA-100 Bedienungsanleitung

Quatech

Quatech SSPX-100 Bedienungsanleitung

Quatech

Quatech QS-300M Bedienungsanleitung

Quatech

Quatech PCD2-F Bedienungsanleitung

Quatech

Quatech DP-PCIE-100 Bedienungsanleitung

Quatech

Quatech SSCF-100 Bedienungsanleitung

Quatech

Quatech HS-PCIE-100 Bedienungsanleitung

Quatech

Quatech DS-3000 Bedienungsanleitung

Quatech

Quatech SSCF-200 Bedienungsanleitung

Quatech

Quatech QSSP-PCIE-100 Bedienungsanleitung

Quatech

Quatech DS-1000 Bedienungsanleitung

Quatech

Quatech XCD-B/PCIE-ST Bedienungsanleitung

Quatech

Quatech DSPXP-100 Bedienungsanleitung

Quatech

Quatech MPA-200 Bedienungsanleitung

Quatech

Quatech ES-100D Bedienungsanleitung

Quatech

Quatech DS-PCIE-100 Bedienungsanleitung

Quatech

Quatech DSSP-PCIE-100 Bedienungsanleitung

Quatech

Quatech ES-100M Bedienungsanleitung

Quatech

Quatech WLEA-RA-DP501 Betriebsanleitung

Quatech

Quatech DSPXP-100 Bedienungsanleitung

Quatech

Quatech DP-PCIE-100 Bedienungsanleitung

Quatech

Quatech DS-302 Bedienungsanleitung

Quatech

Quatech SPP-100 Bedienungsanleitung

Quatech

Quatech DS-100 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung