Qvis LED-HDMI3206-PA Bedienungsanleitung

32”/40”/50” LED HDMI

SECURITY MONITOR

LED-HDMI3206-PA

LED-HDMI3206-MA

LED-HDMI4006-MA

LED-HDMI5006-MA

User’s Manual

V1.0 01 / 2014

Welcome

Thank you for purchasing the 32”/40”/50” LED HDMI Security

Monitor.

This user’s manual is designed to be a reference tool for the

installation and operation of the device.

Here you can find information about the corresponding model’s

features and functions, as well as detailed instructions on how

to operate the device.

Before you operate the device please read the following

safeguards and warnings carefully!

Table of Contents

1General information.....................................................................................................3

1.1 Product description and type of use........................................................................3

1.2 General features.....................................................................................................3

1.3 Opening the box .....................................................................................................3

1.4 Contents of the box.................................................................................................3

2Warnings ......................................................................................................................4

2.1 Power .....................................................................................................................4

2.2 Safety precautions..................................................................................................4

2.3 Installation precautions...........................................................................................4

2.4 Cleaning the device ................................................................................................5

2.5 Privacy and copyright..............................................................................................5

3Controls & Settings .....................................................................................................6

3.1 Controls:.................................................................................................................6

3.1.1 Control key board: ...........................................................................................6

3.1.2 Power connector (DC) .....................................................................................6

3.1.3 Power BUTTON...............................................................................................6

3.1.4 Volume buttons (< >) ......................................................................................6

3.1.5 Menu button [MENU] and confirm....................................................................7

3.1.6 Video input selection button [INPUT] ...............................................................7

3.1.7 YPBPR ............................................................................................................7

3.1.8 HDMI input.......................................................................................................7

3.1.9 PC signal input (VGA)......................................................................................7

3.1.10 Audio input/output (VGA).................................................................................7

3.1.11 BNC1 - BNC2 video inputs...............................................................................7

3.1.12 BNC1 - BNC2 video output..............................................................................8

3.2 OSD CCTV menu controls......................................................................................8

3.2.1 Picture .............................................................................................................9

3.2.2 Sound............................................................................................................10

3.2.3 TIME..............................................................................................................11

3.2.4 Auto Sleep.....................................................................................................12

4Product Specifications.............................................................................................. 13

1 General information

1.1 Product description and type of use

The LED color monitor is designed to be very durable and comes with a hardwearing

case structure. It is also ideal for continuous operation and can be used in closed

circuit TV systems without risks of excessive operational degradation. The Flat Panel

Display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD).

1.2 General features

Display area

Wall mounting (bracket not included)

Audio input/output sockets

HDMI video input

Two composite video input channels (BNC) & one composite video output

channels (BNC).

Wide inclination/viewing angle to allow you to view either from a seated position,

when standing up or when moving from one position to the other.

Multilingual OSD menu for easy setup and optimisation of the display.

1.3 Opening the box

Check that the packing and the contents are not visibly damaged. Contact the

retailer immediately if parts are either missing or damaged. Do not attempt to use the

device if you do find that there are parts missing or the device is damaged. Send the

product back in its original packing, if it is damaged, to the supplier.

1.4 Contents of the box

LCD monitor

User’s Manual

Power cord

Power unit 12VDC 4A

VGA cable

Audio cable (optional)

2 Warnings

2.1 Power

Only use the power unit provided to power the device. Check the mains voltage

rating before plugging the power unit in.

Do not pull the cable to unplug the device. Grip the plug end firmly and slowly

pull out of the monitor.

2.2 Safety precautions

Keep the device away from rain and atmospheres with a high humidity, to

prevent risk of fire and electrocution. Do not introduce material (either solid or

liquid) to the interior of the device. If this should accidentally occur, disconnect

the device from the mains IMMEDIATELY and have it inspected by qualified

personnel.

Never open the device. In all cases, contact the qualified personnel or authorised

service center for repairs.

Keep the device away from children, to prevent accidental damage.

Do not touch the device with wet hands so to prevent electrical shock or

mechanical damage.

Do not use the device if the external casing is damaged from a fall or impact

from a heavy/forceful object. There is a risk of electrocution if the device is

continued to be used when the casing has been compromised. In all cases,

contact the qualified personnel or authorised service center for repairs.

It is advisable to disconnect the power wire if the monitor is not used for a certain

time.

2.3 Installation precautions

To prevent the device from overheating, locate it in a position where there is an

allowance of air flow through the slots in the casing. Ensure at least 5 cm of free

space when installing inside a rack. For the same reason, do not install near

sources of heat, such as radiators or hot air ducts. Keep away from direct

sunlight. Do not install in areas subject to excessive dust, mechanical vibrations

or shocks.

Do not arrange this device on an unstable surface, such as a unbalanced or

slanted table. The device could fall causing injury or mechanical failures.

Do not install the device in a place where it could be exposed to humidity or

water. Do not direct a jet of water onto the device: risk of fire, electrocution or

even mechanical failure.

Stop using the device if water or other material should penetrate inside; risk of

fire and electrocution. Contact the retailer or authorized installer.

Slots and openings in the cabinet are provided for ventilation. These openings

must not be blocked or covered.

Do not place heavy or heat generating objects on top of the device: this could

damage the casing and/or increase internal temperature causing faults.

Do not cover the device with a cloth while it is running to prevent deforming the

external casing and overheating the internal parts. This could raise the risk of

fire, electrocution and mechanical failure.

Keep magnets and magnetised objects away from the device to prevent faults.

Do not use the device in the presence of smoke, vapor or dust.

Wait for a while before operating a device immediately after transporting it from a

cold place to a warm place and vice versa. Wait on average for three hours: this

will allow the device to adapt to the new ambient (temperature, humidity, etc.).

The monitor is provided with a plastic base and rubber feet. It can be positioned

on a horizontal surface, such as a desk or a table. Make sure that the device is

fastened firmly and that it is not resting on unstable supports or surfaces.

Remember to adjust the brightness and contrast to obtain a perfect image.

The monitor can also be installed on the wall by means of a bracket (not

provided).

2.4 Cleaning the device

Rub delicately with a dry cloth to remove dust and dirt.

Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth

alone.

Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically

treated clothes to clean the device to prevent deformation, deterioration or

scratches to the paint finish.

2.5 Privacy and copyright

The LCD monitor is a device for CCTV systems. Recording of images is subject

to the laws in force in your country. Recording of images that are protected by

Product users shall be responsible for checking and respecting all local rules and

regulations concerning monitoring and recording video signals. The

manufacturing SHALL NOT BE MADE LIABLE for use of this product not in

compliance with the laws in force.

3 Controls & Settings

3.1 Controls:

3.1.1 Control key board:

Control Key

Function

INPUT

Use this to select the video input source and

confirm your choice in an on-screen menu.

Use this to display the main on-screen menu.

“∧””∨”

Use this to select a menu or an item.

“<” ”>”

Use this to change parameters

Power

Use this switch to turn on the monitor. Press

this button again to turn off the monitor.

NO SIGNAL means that there is no connected video signal being detected from the input port.

The indicators display the status of the power:

Indicator

Status

Lit (Red)

Power off

Lit (Green)

Power on

Blinking (Red):

Power saving mode

3.1.2 Power connector (DC)

Plug the power wire of the adapter provided into the respective DC power port.

3.1.3 Power BUTTON

This is used to switch the monitor on and off. The blue LED lights up when the monitor is on,

when it is in red it means that it is in standby mode.

3.1.4 Volume buttons (< >)

These keys allow you to change the volume (”>” button increases the volume, “<” button

decreases the volume).The “Menu” button also allows you to confirm each setting.

3.1.5 Menu button [MENU] and confirm

This is used to access and quit the OSD (On-Screen Display) Menu and to confirm the selected

settings.

3.1.6 Video input selection button [INPUT]

To select the desired signal (YPBPR, PC-RGB, VGA, HDMI, BNC1 (AV1) or BNC2(AV2)) press

the buttons (“∧””∨”) to select the desired item. Press the button “>” or “<” to confirm.

3.1.7 YPBPR

YPBPR is a color space used in video electronics, this is in reference particularly to

component video cables.

3.1.8 HDMI input

This HDMI port (High Definition Media Interface) allows the connection of a HDMI signal and

an audio signal, coming from an external source provided with an HDMI output

3.1.9 PC signal input (VGA)

PC input.

3.1.10 Audio input/output (VGA)

Jack plugs audio input/output.

3.1.11 BNC1 - BNC2 video inputs

These inputs allow the connection of video signals coming from external sources.

3.1.12 BNC1 - BNC2 video output

This BNC output allows the repeating of the BNC1-BNC2 video signals to another video

input (another monitor or DVR).

3.2 OSD CCTV menu controls

Open the menu interface using the [Menu] button in order to access the menus, submenus and

their functions

Selection of the Menus

In order to show the main Menu, press the [Menu] button.

In order to select the Menus of the horizontal bar, press the [∧∨] buttons.

In order to select each single Menu, press the [> <]buttons.

In order to change a value (once the option is selected), press the [> <]buttons.

In order to exit from menus and submenus, press the [Menu] button.

Volume adjustment

In order to vary the volume without entering the OSD Menu please use the [> <]buttons.

3.2.1 Picture

When selecting the icon, the following screen will appear (this will depend on the

signal type):

PICTURE MODE

This allows you to change the image settings among the following options: ”User -Vivid -Soft -

Standard”. Press “∧”or “∨”buttons to select and press the “>” or “<” buttons to change the

values of this parameter.

COLOR TEMP.

This allows you to change the color settings among the following options: “Warm – Cool –

Normal”. Press “∧” or “∨”buttons to select and press the “>”or “<”buttons to change the

values of this parameter.

ASPECT RATIO

This allows you to change the video dimension format on the screen. The option settings include:

16:9, 4:3 and point to point”. Press the “∧” or “∨”buttons to select. Press “>”or “<”to

change the values of this parameter.

Noise Reduction Middle

This allows you to enable/disable the ‘Noise Filter’ with three possible values: HIGH -LOW –MID.

Press the “∧” or “∨”buttons to select. Press “>”or “<”to change the values of this parameter.

SCREEN

This displays information as follows: Auto Adjust-Horizontal, Pos-Vertical, Pos 24-Size, 100-

Phase 100.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Qvis Monitor Handbücher

Qvis

Qvis LED-HDMI2406-MA Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung