R.LiNK 27-590 Bedienungsanleitung

r.LiNK Video-inserter

27-590

Compatible with Vauxhall vehicles with

Navi 900 intelliLink navigation system

with 8” touch monitor

Video-inserter for rear-view camera input

and two additional video sources

Product features

•Video-inserter for factory-infotainment systems

•2 CVBS video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner)

•FBAS Rear-view camera video-input

•Automatic switching to rear-view camera input on engagement of the reverse gear

•Activatable parking guide lines for rear-view camera (not available on all vehicles)

•Video-in-motion in drive mode (ONLY for connected video-sources)

•Video inputs NTSC compatible

Page

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Connectors – video interface

1.4. Dip-switch settings – video interface

1.4.1. Enabling the interface’s video inputs (dip 2-3)

1.4.2. Rear-view camera setting (dip 5)

1.4.3. Monitor adjustment (dip 6-8)

1.5. Connectors – CAN box

1.5.1. Dip switch settings – CAN box

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connecting – 10pin PNP cable

2.4. Connection – picture signal cable

2.5. Connection - video sources

2.5.1. After-market rear-view camera

2.5.1.1. Case 1: CAN-box receives the reverse gear signal

2.5.1.2. Case 2: CAN-box does not receive the reverse gear signal

2.5.2. Audio-insertion

2.6. Connection - video-interface and keypad

2.7. Picture settings and guide lines

3. Switching the video sources

3.1. By infotainment buttons

3.2. By external keypad

4. Specifications

5. Frequently asked questions

6. Technical support

Page

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation.

Technical knowledge is necessary for installation. The place of installation must be free of

moisture and away from heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Page

Brand Compatible vehicles infotainment systems

Vauxhall

Astra K (Sports Tourer) 2016 >

Insignia A 2014-2016

Insignia B 2017 >

Mokka X 2016>

Navi 900 intelliLink with 8inch

touch monitor (Gen. 1 und 2)

Limitations

Video only The interface inserts ONLY video signals into the infotainment. For

inserting Audio signals either the possibly existing factory audio-

AUX-input or a FM-modulator can be used. If 2 audio sources shall

be connected to the infotainment, an additional electronic is

necessary to switch them.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-

view camera is only possible while the reverse gear is engaged. To

delay the switch-back an additional electronic part is required.

Guide lines If the CAN-box does not receive the required information from the

vehicle CAN-bus, the guide-lines will not be supported.

1.2. Checking the compatibility of vehicle and accessories

Compatibility

Page

1.3. Connectors – video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

1.4. Dip-switch settings – video interface

Some settings must be selected by the dip-switches on the

video-interface. Dip position down is ON and position up is OFF.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

See following chapters for detailed information.

Dip

Function

ON (down)

OFF (up)

No function

set to OFF

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

Monitor specific

adjustments

Try all possible combinations of Dips 6, 7 and 8 to receive

the best picture (quality and size)

Page

1.4.1. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It is recommended to enable only the required inputs, disabled inputs

will be skipped when switching through the video-interfaces inputs.

1.4.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera.

If set to ON, the interface switches to its rear-view camera input „Camera-IN“ while the

reverse gear is engaged.

1.4.3. Monitor adjustments (dip 6-8)

Die Dip-Schalter 6, 7 und 8 regeln die monitorspezifischen Bildeinstellungen. Je nach

Spezifikation der Monitore können die Bildeinstellungen selbst bei der gleichen Head-Unit

variieren. Daher ist es notwendig, alle möglichen Kombinationen der 3Dip Schalter zu

testen. Den Test durchführen, während eine funktionierende Video-Quelle an einem

ausgewählten Eingang angeschlossen ist, um festzustellen, welche Kombination die beste

Bildqualität ergibt (manche Kombinationen ermöglichen kein Bild). Es kann ein kurzer

Durchlauf aller möglichen Dip-Kombinationen durchgeführt werden. Sollte sich das Bild bei

diesem Durchlauf nicht verbessern, noch einmal versuchen und nach jeder Veränderung der

Dips den 6-Pin Stromstecker an der Interface-Box kurz trennen.

Note: Dip 1 and 4 are out of function and have to be set to OFF.

1.5. Connectors – CAN box

Dip-switch settings – CAN box

Some settings have to be selected by the dip-switches of the

CAN box. Dip position “down” is ON and position “up” is OFF.

Fahrzeug/Navigation

Dip 1

Dip 2

Dip 3

Dip 4

All vehicles

OFF

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Page

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

Note: Before a final installation, we recommend a test-run to ensure the compatibility of the

vehicle and the interface.

Due to changes in the production of the vehicle manufacturer there’s always a possibility of

incompatibility.

2.1. Place of installation

The interface is built to be connected at the factory monitor.

Page

2.2. Connection schema

Page

2.3. Connection - 10pin PNP cable

Connect the female 6pin connector of the 6 to 12pin cable to the 6pin connector of the

video interface.

Connect the female 8pin connector of the communication cable to the 8pin connector of the

video interface.

Remove the female 10pin connector of the factory harness at the rear-side of the monitor

and connect it to the male 10pin connector of the 10pin PNP cable.

Connect the opposite female 10pin connector of the 10pin PNP cable to the previously

become free male 10pin connector at the rear-side of the monitor.

Page

Note: Check the LEDs on CAN-box after reconnecting the battery, two must be on.

Not all vehicles are kompatible. If the CAN-box does not deliver ACC to pin2 of the video-

interface or blocks the thevehicle’s CAN, it is possible to install the video interface without

the CAN-box (analog). For analogue connection see 6pin assignment above.

2.4. Connection – picture signal cable

Remove the female Mini USB connector from the rearside of the blackbox and

connect it to the male black Mini USB connector of the picture signal cable.

Connect the female black colored Mini USB connector of the picture signal cable to

the previously become free male Mini USB connector at the rearside of the blackbox.

Connect the female waterblue colored HSD+2 connector to the HSD+2 connector of

the video interface.

Inhaltsverzeichnis

Andere r.LiNK Auto-Videosystem Handbücher

r.LiNK

r.LiNK CI-RL5-UCON8-CP Bedienungsanleitung

r.LiNK

r.LiNK RL4-UCON8-CP Bedienungsanleitung

r.LiNK

r.LiNK RL3-MBN51 Bedienungsanleitung

r.LiNK

r.LiNK RL3-SY3 Bedienungsanleitung

r.LiNK

r.LiNK RL4-NAC Bedienungsanleitung

r.LiNK

r.LiNK CI-RL4-MIB Bedienungsanleitung

r.LiNK

r.LiNK CI-RL4-C3D Bedienungsanleitung

r.LiNK

r.LiNK RL4-NAC08 Bedienungsanleitung

r.LiNK

r.LiNK 3008 NAC Bedienungsanleitung

r.LiNK

r.LiNK CI-RL4-MIB-TR Bedienungsanleitung

r.LiNK

r.LiNK RL4-R40 Bedienungsanleitung

r.LiNK

r.LiNK RL4-MBN51 Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

r.LiNK

r.LiNK RL3-MIB92 Bedienungsanleitung

r.LiNK

r.LiNK CI-RL3-MIB92 Bedienungsanleitung

r.LiNK

r.LiNK CI-RL3-R40 Bedienungsanleitung

r.LiNK

r.LiNK RL3-MIB-4 Bedienungsanleitung

r.LiNK

r.LiNK CI-RL3-MIB-4 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung

auna

auna MVD-400 CP Bedienungsanleitung

r.LiNK 27-590 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken