LOCK/UNLOCK
TRANSPONDER ID
Insures that the Transponder ID does not get changed until
you change it!
1. Select the ID code you want to lock and then
press blue ( -) and left (◄)arrow. 'ID code' will be
blinking.
2. To unlock the ID code, press blue ( -) and right
(►) arrow while the 'ID code' is blinking. It stops
blinking and unlocks the ID code.
LOCK/UNLOCK
MEMORY BANK
Insures that the data in a memory bank does not get deleted
until you want to delete it.
1. Select the memory bank you want to lock and
then press blue (-) and left (◄)arrow. 'Memory'
will be blinking.
2. To unlock the memory bank, press blue ( -) and
right (►) arrow while the Memory is blinking. It
stops blinking and unlocks the memory bank.
Visit our website (www.raceceiver.com) to get your free
software so you can upload your lap times to your
computer.
LAPCEIVER PC PROGRAM
1. Connect the LapCeiver to your computer by
using UAJ100 (this cable was included with your
LapCeiver purchase). 'USb' will be displayed on
the screen.
2. Open the PC program. The Com Status should
be green.
Note: If the Com Status is still black, you should
check the com port on your computer.
3. Click read and then 'Data Read' window will
appear. Next 'Data Read OK!' window will appear.
4. Click the window and all data should go to your
PC.
5. To program ID code, click ' SYSTEM' and then
'ID Code Read/Write'. Now you can read and
write the ID code.
