Racing RAC3000EB Bedienungsanleitung
ORIGINAL INSTRUCTIONS >EN
ELECTRIC BLOWER VACUUM SHREDDER
RAC3000EB
USER GUIDE
WARNING: Read thoroughly the instruction manual before using.
CONTENTS
1. SAFETY INSTRUCTIONS.....................................................................................................................3
2. YOUR PRODUCT.................................................................................................................................14
3. ASSEMBLY........................................................................................................................................... 15
4. OPERATION......................................................................................................................................... 16
5. MAINTENANCE AND STORAGE..................................................................................................... 18
6. DISPOSAL.............................................................................................................................................18
7. DECLARATION OF CONFORMITY................................................................................................. 19
8. WARRANTY..........................................................................................................................................20
9. PRODUCT FAILURE........................................................................................................................... 21
10. WARRANTY EXCLUSIONS.............................................................................................................22
02
1. SAFETY INSTRUCTIONS
Safe operating practices for hand-held mains-
operated electrical garden vacuums, and garden
blower/vacuums with or without shredding means
and garden blowers
Training
a) Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the operator
c) Keep in mind, that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
a) Obtain ear protection and safety glasses. Wear
them at all times while operating the machine.
b) While operating the machine always wear
substantial footwear and long trousers. Do not
operate the machine when barefoot or wearing open
sandals. Avoid wearing clothing that is loose fitting or
that has hanging cords or ties.
c)Do not wear loose clothing or jewellery that can be
drawn into the air inlet. Keep long hair away from the
air inlets.
d) Operate the machine in a recommended position
and only on a firm, level surface.
e) Do not operate the machine on a paved or gravel
surface where ejected material could cause injury.
f) Before using, always visually inspect to see, that the
shredding means,shredding means bolts and other
03
fasteners are secure, the housing is undamaged and
that guards and screens are in place. Replace worn
or damaged components in sets to preserve balance.
Replace damaged or unreadable labels.
g) Before use, check the supply and extension cord for
signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not
use the machine if the cord is damaged or worn.
h) Never operate the machine while people, especially
children, or pets are nearby.
Operation
a) Before starting the machine, make certain that the
feeding chamber is empty.
b) Keep your face and body away from the feed intake
opening.
c)Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge chute,
or near any moving part.
d) Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the
base of the machine when feeding material into it.
e) Always stand clear of the discharge zone when
operating this machine.
f) When feeding material into the machine be extremely
careful that pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
g) If the cutting mechanism strikes any foreign objects
or if the machine should start making any unusual
noise or vibration, immediately shut off the power
04
source and allow the machine to stop. Disconnect the
machine from the supply and take the following steps
before restarting and operating the machine:
inspect for damage;
replace or repair any damaged parts;
Check for and tighten any loose parts.
h) Do not allow processed material to build up in the
discharge zone; this may prevent proper discharge
and can result in kickback of material through the
intake opening.
i) If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply
before cleaning debris.
j) Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
k)Keep the power source clean of debris and other
accumulations to prevent damage to the power
source or possible fire.
l) Do not transport this machine while the power source
is running.
m) Stop the machine, and remove plug from the socket.
Make sure that all moving parts have come to a
complete stop
whenever you leave the machine,
before clearing blockages or unclogging chute,
Before checking, cleaning or working on the
machine.
n) Do not tilt the machine while the power source is
running.
05
Maintenance and storage
a) When the machine is stopped for servicing,
inspection, or storage, or to change an accessory,
shut off the power source, disconnect the machine
from the supply and make sure that all moving parts
are come to a complete stop. Allow the machine to
cool before making any inspections, adjustments, etc.
Maintain the machine with care and keep it clean.
b) Store the machine in a dry place out of the reach of
children.
c)Always allow the machine to cool before storing.
d) When servicing the shredding means be aware that,
even though the power source is switched off due to
the interlock feature of the guard, the shredding
means can still be moved
e) Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessorises.
f) Never attempt to override the interlocked feature of
the guard.
Additional safety instructions for units with bagging
attachments
Switch-off the machine before attaching or removing the
bag.
Recommendation
The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
Additional instructions
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
06
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge or people unfamiliar with these
instructions to use the machine, local regulations may
restrict the age of the operator.
Never use the machine when people, especially
children, or pets are nearby.
Remember that the operator or user is responsible for
accidents or hazards occurring to persons or their
belongings.
Before connecting, check:
oWhether the tool and cable are not damaged. If
damaged, do not use the machine and bring it back
to your dealer for inspection and repair.
oThat the voltage on the rating plate of the tool
matches with your electrical installation.
Do not use accessories other than those
recommended by the manufacturer; Non-
recommended accessories can damage the unit
and/or cause injuries.
Do not disassemble the tool yourself. Disassembly,
repair or inspection must be made exclusively by
qualified personnel.
Use the tool fully assembled and secure. Before using,
check if the protections and safety devices are in
place.
07
During the operation of the machine, always wear
protective equipment, including protective masks,
visors or goggles, ear protection, helmet, gloves, non-
slip footwear and protective clothing.
Always carry the machine by its handle; never use the
cord or any other part of the machine.
Do not use the machine when you are tired, under the
influence of alcohol or drugs or sick.
Use the tool to suck and blow leaves and similar
materials. Do not blow flammable materials, cigarette
butts and materials that can damage the device.
Do not use the appliance to suck water or wet debris.
Always use the machine with the collection bag.
Avoid using the machine in bad weather, especially
when there is a risk of thunderstorms and lightning.
In case of accident, immediately stop using the
machine. Turn off and unplug it and check the
problem. Do not use the machine while the machine is
damaged.
Do not use the tool if you are drunk, tired, under the
influence of drugs or ill. Do not use the tool if you are
not in an adequate physical condition
Do not use the tool during bad weather conditions
(lighting, rain, storm, big winds, etc.)
Do not use the tool in an area where ventilation is
poor. Gas emissions can cause injury.
Do not use the tool in damp locations.
Do not use the tool in the presence of flammable
liquids or gases.
Do not operate the product with damaged guards or
shields not in place.
08
Do not lean. Keep a good balance at all times.
Keep handles dry, clean and free from oil and grease.
Use and handle the machine carefully.
Do not put your body, clothes or shoes close to the air
opening
Do not lift up the tool when it is in operation.
Do not point the tool in front of people; this can lead to
accidents and injuries.
Do not put any objects inside the tube and inside the
tool.
Before using the product and after any shock, please
check it for signs of wear or damage.
Please carry out repairs if necessary.
Inspect and regularly service the product. Repairs
should be carried out only by an authorized service
center or a similarly qualified specialist.
Children should not play with plastic bags, sheets and
small parts! Keep them out of the reach of children.
There is a danger of swallowing and suffocation!
Do not use the product on a slippery surface.
Do not use the product on steep, slippery slopes. If
you need to work on slopes, use an extreme care and
be careful about your footing. Please wear non
slippery footwear.
When planning your work schedule, allow enough
time for rest. Limit continuous use of the device, e.g.
use 30 ~ 40 minutes per session, and take 10 ~ 20
minutes of rest between work sessions. Work a
maximum of two hours per day.
Do not connect a damaged cord to supply or touch a
damaged cord before it is disconnected from the
09
supply; damaged cords can lead to contact with live
parts.
Keep extension cords away from moving hazardous
parts to avoid damages to the cords which can lead to
contact with live parts.
When a cable is damaged or entangled, please stop
immediately to use the tool. Switch off the tool, let it
cool and unplug it in a secure way.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
Use extra care when using on stairs.
In dusty conditions, slightly dampen surfaces or use
mister attachment if available
Use the full blower nozzle extension so the air stream
can work closer to the ground
Never use the appliance for spreading chemicals,
fertilizer, or any other substances that may contain
toxic materials. Do not use appliance as a sprayer of
flammable liquids.
Keep all the air intakes and the blower tube free of
dust, lint, hair and other material that may cause a
reduction in air flow.
Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses,
and powders.)
Disconnect electrical supply before opening inlet
cover or installing pick up tubes. Never operate unit
without inlet cover secured or pick-up tubes in place.
10
Inhaltsverzeichnis
Andere Racing Aktenvernichter Handbücher
Beliebte Aktenvernichter Handbücher anderer Marken
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung
GBC
GBC ShredMaster CC055 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
Rexel
Rexel Optimum AutoFeed+ 45X Bedienungsanleitung
Martin Yale
Martin Yale 227284S1 Bedienungsanleitung
