Radial Engineering SAT-2 Bedienungsanleitung

Radial Engineering Ltd.

1588 Kebet Way, Port Coquitlam BC V3C 5M5

Tel: 604-942-1001 • Fax: 604-942-1010 • Email: [email protected]

User Guide

SAT-2TM

PAGE LEFT BLANK

SAT-2 Stereo Audio Attenuator & Monitor Controller

Overview�� 1

Features �� 2

Making Connections�� 3

Setting Levels�� 3

Mute, Mono and DIM�� 4

Block Diagram �� 5

Speci cations �� 6

Warranty �� Back Cover

Thank you for purchasing the SAT-2™, a simple but robust audio attenuator and monitor controller� While the SAT-2 has

an intuitive feature set that is designed to be easy to use, please take a few minutes to review this short manual to get

the most out of this deceptively powerful device. If you  nd you have any questions not answered here, please visit our

website at www.radialeng.com where we post frequently asked questions and product updates. If you still don’t  nd the

answer to your question, feel free to send us an email at [email protected] and we will do our best to respond promptly.

Radial Engineering Ltd. SAT-2™ User Guide

OVERVIEW

The SAT-2 gives you the ability to set your levels or attenuate hot signals wherever you might need to� It works as a monitor

controller between an audio interface and a set of powered speakers, or to attenuate the output of a recording console

before the signal is sent to a recording device� The SAT-2 can also be connected between line-level studio devices, taming

the outputs of a hot microphone preamp to avoid overloading the inputs of a recording interface without losing any tone

or character� With its compact and rugged design and useful feature set, the SAT-2 makes for a great addition to your

audio tool kit�

Radial Engineering Ltd. SAT-2™ User Guide

FEATURES

6 87

2 3 4 5

1. MONO: Sums the left and right outputs

to mono�

2. MUTE: Silences the outputs of the SAT-2�

3. MASTER LEVEL: Sets the overall output

level� Passes signal at unity gain (no

attenuation) when turned fully clockwise�

4. DIM ON: Used to reduce output levels

temporarily without affecting the setting on

the master level control�

5. DIM LEVEL: Sets the amount of signal

attenuation applied when Dim On is

engaged�

6. OUTPUTS: XLR outputs for a pair of

powered speakers or the inputs of a

recording interface�

7. INPUTS: TRS ¼” or XLR inputs are

available for the left and right channels�

8. NO SLIP PAD: Provides electrical &

mechanical isolation and prevents the unit

from sliding around�

Radial Engineering Ltd. SAT-2™ User Guide

MAKING CONNECTIONS

Before plugging in any cables, ensure that your sound system is turned off and all volume levels are turned down� This

prevents any plug-in transients from damaging speakers or other sensitive components� The SAT-2 is passive, so it does

not require any power to operate.

Each input has a ¼” TRS and an XLR connector to accept balanced audio signals from a variety of different sources�

For best results, only use one of these connector types at a time on each channel� The XLR outputs are designed to be

connected to the line level inputs of a recording console, powered speaker, or audio interface�

SETTING LEVELS

The SAT-2 is a unity gain device, which means that when the master level control is turned all the way up (fully clockwise)

the SAT-2 outputs have the same signal level as its inputs. When  rst setting levels, start with the volume turned all the

way down, and then slowly turn back up until you reach a comfortable listening level�

Radial Engineering Ltd. SAT-2™ User Guide

MONO, MUTE AND DIM

The MONO switch sums the left and right signals together at each of the outputs, allowing you to check for phase

compatibility when mixing� You can also use it to take a mono input and split it to two destinations, or use it for parallel

processing of a mono signal�

The MUTE switch cuts the signal to the XLR outputs, while the DIM switch allows you to temporarily reduce the output

level without changing the position of the master level control� The DIM LEVEL sets the amount of attenuation provided

when the DIM switch is depressed� Use the DIM to check your mixes at lower volume levels, or to talk to other people in

the control room without stopping audio playback�

Monitor Controller

Connect between your audio interface and pow-

ered speakers, utilizing the level control and

mono switch to check phase compatibility.

Parallel Processing

Take the output of a mic preamp into the SAT-2,

engage the mono switch, and connect one of the

SAT-2 outputs directly to your recording interface,

and the other to an effects device.

Radial Engineering Ltd. SAT-2™ User Guide

BLOCK DIAGRAM*

* Subject to change without notice.

LE V E L

R IG H T IN PU T

R IG H T O U TP U T

LE F T IN PU T

LE V E L

DIM C O NTR O L

DIM

S W ITC H

DIM

S W ITC H

M O N O

S U M

DIM C O NTR O L

M U TE

LE F T O U TPU T

Fem ale XLR an d 1 /4 " Jacks

Radial Engineering Ltd. SAT-2™ User Guide

SPECIFICATIONS*

* Subject to change without notice.

Audio Circuit Type: ��Passive Audio Signal Path

Number of Channels:��2

Frequency Response: ��20Hz-20kHz

Noise Floor: �� -115dBu

Dynamic Range: �� >141dBu

Maximum Input:�� >+26dBu

Gain:�� 0dB

Intermodulation Distortion:�� >0.001% @0dBu

Total Harmonic Distortion: �� >0.0005% @ 0dBu

Common-Mode Rejection Ratio: �� >80dB

Phase deviation:�� 0° @ 20Hz, 0° @ 1kHz, +2° @ 10kHz

Input Impedance:��110k Ohms

Output Impedance:�� 1�8k Ohms

Insertion Loss: ��-0�73dBu

Power: �� Passive, no power required

Construction: �� 14 gauge steel chassis & outer shell

Finish:�� Durable Powder Coat

Size (L x W x D):�� 5”x3�312”x1�78”

Weight: ��0�70kg (1�55lbs)

Conditions:��For use in dry conditions between 5°C and 40°C

Warranty: �� Radial 3-Year, transferable

Notes

Inhaltsverzeichnis

Andere Radial Engineering Stereoanlage Handbücher

Radial Engineering

Radial Engineering Trim Two Bedienungsanleitung

Beliebte Stereoanlage Handbücher anderer Marken

LG CM3330B Bedienungsanleitung

Sony

Sony SS-CEP50 Bedienungsanleitung

Cetacea Sound

Cetacea Sound CVS-II Bedienungsanleitung

Aiwa

Aiwa XR-H66MD Bedienungsanleitung

Denon

Denon UCD-250 Bedienungsanleitung

Sanyo

Sanyo DC-MX41i Bedienungsanleitung

Sharp

Sharp CD-ES600V Bedienungsanleitung

Exibel

Exibel BDX600-UK Bedienungsanleitung

Sanyo

Sanyo DC-F320 Bedienungsanleitung

Philips

Philips FWM583X Bedienungsanleitung

Sharp

Sharp CD-C462 Bedienungsanleitung

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Bedienungsanleitung

Aiwa

Aiwa XR-EM70 Bedienungsanleitung

Cyrus

Cyrus Lyric Bedienungsanleitung

Philips

Philips MCM159/98 Bedienungsanleitung

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Bedienungsanleitung

RCA

RCA RS3965SB Bedienungsanleitung

Sharp

Sharp XL-UH240 Bedienungsanleitung