Radio Shack 22CH GMRS/FRS Bedienungsanleitung

www.radioshack.comSM

OWNER’S MANUAL —

Please read before using this equipment. 21-1846

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

22ch GMRS/FRS

Base Station

!IMPORTANT !

If an icon appears at the end of a paragraph, go to the box on that

page with the corresponding icon for pertinent information.

!— Important Ô—Note

VOX

(Page 12)

VOLUME

(Page 7)TALK

MON/

DUAL WATCH

(Page 12 and 13)

MIC/SPK

M1/M2/M3

(Page 12)

e/SCAN

(Page 7)

d/CALL

(Pages 7 & 10)

VOX/MENU

(Page 11)

Antenna

QUIET

(Page 9)

FEATURES

Thank you for purchasing the

RadioShack 22ch GMRS/FRS Base

Station. Your radio is a new two-way,

short-range voice radio service that lets

families and groups keep in touch with

each other on specific reserved

channels. You can place it on a

desktop surface or mount it on a wall in

your home or office.

Your radio has 22 channels and 38

different quiet codes, which you can

use to talk with another person who has

a General Mobile Radio Service

(GMRS) or Family Radio Service (FRS)

radio set to the same frequencyas your

radio. !

Your radio has auto-squelch, so you

will not hear anything on a channel

unless someone is transmitting nearby

on the same channel. You can turn off

auto-squelch by pressing down MON to

hear weaker, distant transmissions.

Features

CONTENTS

Preparation ................. 4

Selecting a

Location .................. 4

Using AC Power ...... 4

Mounting on

a Wall ...................... 6

Operation .................... 7

Selecting

a Channel ................ 7

Using Quiet Codes .. 9

Using TALK ........... 10

Using CALL ........... 10

Using Key Lock ...... 11

Using VOX ............. 11

Using Skip ............. 12

Storing a Channel

in Memory ............. 12

Using Dual

Watch .................... 13

Using the

Courtesy Tone ....... 13

Using the

Key Tone ............... 14

Using the

Backlight ............... 14

Using a Headset ... 14

Care .......................... 15

Service and Repair ... 15

Specifications ........... 16

!IMPORTANT !

A license is not required to transmit on Channels 8–14. However, to transmit on

the other 15 channels, you must obtain a license from the FCC. A small fee is

required.

Its other features include:

Up /Down Channel — lets you easily

select a channel with the press of

button.

PLL (Phase-Lock Loop) Controlled

Circuitry — provides accurate and

stable channel selection.

Quiet Codes (Continuous Tone

Control Squelch System) — helps

reduce interference from other systems

in the area operating on the same

frequency.

Built-in Modulation Limiter Circuit —

automatically adjusts for a wide variety

of voice levels to ensure an

understandable transmission.

Combined Mic/Speaker Jack —lets

you connect an optional microphone/

speaker to the radio.

Monitor Function — lets you hear

everything on a channel, even weak

transmissions.

The FCC Wants

You to Know

This equipment has

been tested and found

to comply with the limits

for a Class B digital

device, pursuant to Part

15 of the FCC Rules.

These limits are

designed to provide

reasonable protection

against harmful

interference in a

residential installation.

This equipment

generates, uses and

can radiate radio

frequency energy and, if

not installed and used in

accordance with the

instructions, may cause

harmful interference to

radio communications.

However, there is no

guarantee that

interference will not

occur in a particular

installation.

If this equipment does

cause harmful

interference to radio or

television reception,

(Continued

)

Preparation

PREPARATION

SELECTING ALOCATION

Select a location for the base station

that is:

•NearanACoutlet

• Out of the way of normal activities

• Not likely to get wet

• Away from electrical machinery,

electrical appliances, and metal

walls or filing cabinets

• Away from wireless intercoms,

alarms, and room monitors

The location of the base station affects

its range. If you have a choice of

several locations, test each to see

which provides the best performance.

USING AC POWER

Power the radio using the supplied 6V,

500 mA AC adapter.

Your radio is UL listed to ETL

standards and meets all applicable

FCC requirements.

(Continued) which can

be determined by

turning the equipment

off and on, the user is

encouraged to try to

correct the interference

by one or more of the

following measures:

• Reorient or relocate

the receiving

antenna.

• Increase the

separation between

the equipment and

receiver.

• Connect the

equipment into an

outlet on a circuit

different from that to

which the receiver is

connected.

• Consult your local

RadioShack store or

an experienced

radio/TV technician

for help.

• If you cannot

eliminate the

interference, the

FCC requires that

you stop using your

radio. (Continued

)

Cautions:

You must use a Class 2

power source that

supplies 6V DC and

delivers at least 500 mA. Its center

tip must be set to positive and its

plug must fit the radio's DC 6V 500

mA jack. The supplied adapter

meets these specifications. Using

an adapter that does not meet

these specifications could damage

the radio or the adapter.

WARNING: To reduce the risk of fire or shock hazard, do not

expose this product to rain or moisture.

CAUTION

RISK OF ELECTRIC

SHOCK. DO NOT

OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

PERSONNEL.

This symbol is intended to alert you to the

presence of uninsulated dangerous voltage

within the product’s enclosure that might be of

sufficient magnitude to constitute a risk of

electric shock. Do not open the product’s case.

This symbol is intended to inform you that

important operating and maintenance

instructions are included in the literature

accompanying this product.

(Continued) Changes

or modifications not

expressly approved by

RadioShack may cause

interference and void

the user’s authority to

operate the equipment.

Your radio might cause

TV or radio interference

even when it is

operating properly. To

determine whether your

radio is causing the

interference, turn off

your radio. If the

interference goes away,

your radio is causing it.

Try to eliminate the

interference by:

• moving your radio

away from the

receiver

• connecting your

radio to an outlet that

is on a different

electrical circuit from

the receiver

• contacting your local

RadioShack store for

help (Continued

)

1. Insert the

supplied

adapter’s

barrel

plug into

the DC 6V

500mA

jack on the back of the radio.

2. Route the adapter cord into the

groove on the back of the radio.

3. Plug the adapter into a standard

AC outlet.

4. Raise the antenna to a vertical

position.

MOUNTING ON AWALL

1. Drill two holes 23/4-inches apart.

Then thread a screw into each

hole, letting the screw heads

extend about 1/8-inch from the

wall. Ô

(Continued)Ifyou

cannot eliminate the

interference, the FCC

requires that you stop

using your radio.

This device complies

withPart15oftheFCC

Rules. Operation is

subject to the following

two conditions: (1) this

device may not cause

harmful interference,

and (2) this device must

accept any interference

received, including

interference that may

cause undesired

operation.

ÔNOTE Ô

To mount the radio on a

wall, you need two

screws (not supplied,

available at your local

RadioShack store) with

heads that fit the

keyhole slots on the

bottom of the radio. 23/4-in Strain

Relief

Groove

Operation

2. Insert the supplied adapter’s barrel

plug into the DC 6V 500mA jack on

the back of the radio.

3. Route the adapter’s cord into the

strain relief groove on the back of

the radio, then plug the adapter

into a standard AC outlet.

4. Place the radio’s two keyhole slots

over the screws and slide the unit

down to secure it.

5. Raise the antenna to a vertical

position.

OPERATION

Rotate VOLUME to turn on/off the radio

andtoadjustthevolume.

SELECTING ACHANNEL

To manually select a channel, press

e/SCAN or d/CALL.Theselected

channel number appears. See

“Transmit Frequencies and Power” on

Page 8.

To scan through the channels, hold

down e/SCAN until SCAN appears. The

radio automatically scans through the

channels and pauses on each active

channel. BUSY appears when a call is

being received. Press any button

except e/SCAN or d/CALL to stop

scanning.

Transmit Frequencies and Power

21-1846

Channel

Transmit

Frequency

(MHZ)

Transmit

Power

(Watts)

Description

1 462.5625 0.6 FRS 1/GMRS Interstitial 1

2462.5875 0.6 FRS2/GMRSInterstitial2

3 462.6125 0.6 FRS 3/GMRS Interstitial 3

4462.6375 0.6 FRS4/GMRSInterstitial4

5 462.6625 0.6 FRS 5/GMRS Interstitial 5

6462.6875 0.6 FRS6/GMRSInterstitial6

7 462.7125 0.6 FRS 7/GMRS Interstitial 7

8467.5625 0.5 FRS 8

9 467.5875 0.5 FRS 9

10 467.6125 0.5 FRS 10

11 467.6375 0.5 FRS 11

12 467.6625 0.5 FRS 12

13 467.6875 0.5 FRS 13

14 467.7125 0.5 FRS 14

15 462.5500 0.6 GMRS Primary 1

16 462.5750 0.6 GMRS Primary 2

17 462.6000 0.6 GMRS Primary 3

18 462.6250 0.6 GMRS Primary 4

19 462.6500 0.6 GMRS Primary 5

20 462.6750 0.6 GMRS Primary 6

21 462.7000 0.6 GMRS Primary 7

22 462.7250 0.6 GMRS Primary 8

USING QUIET CODES

Quiet Codes let you talk and listen to

other radios set to the same channel

and CTCSS(quiet code). This is similar

to having a sub-channel within a

channel, giving you greater

communication flexibility. When you set

a quiet code (there are 38 codes to

choose from) and turn on this feature,

you can communicate with any user

whohasaradiosettothesame

channel and quiet code.

1. Hold down QUIET until the quiet

code flashes.

2. Repeatedly press e/SCAN or

d/CALL until you see the desired

quietcode.(See“QuietCodes”on

Page 10 for a complete list of quiet

codes.) Ô

3. Press QUIET to store the quiet

code.

4. To turn off the quiet code feature,

press QUIET.Thequietcode

disappears.

ÔNOTE Ô

• To quickly find a

quiet code, hold

down d/CALL until

the desired quiet

code appears, then

release d/CALL.

• We recommend that

you select a quiet

code from the range

7–30. If you select a

code below or above

that range, you must

wait 1 to 2 seconds

after holding down

TALK before you

start talking.

Quiet Codes

USING TALK

To transmit through the radio, hold down TALK and speak in a

normal voice. ¬ appears. When you finish speaking, release

TALK.

USING CALL

Hold down CALL to send a page to other GMRS/FRS radios set

to the same channel (and quiet code, if you selected one). ¬

appears and a ringing tone sounds.

01=67.0 11=97.4 21=136.5 31=192.8

02=71.9 12=100.0 22=141.3 32=203.5

03=74.4 13=103.5 23=146.2 33=210.7

04=77.0 14=107.2 24=151.4 34=218.1

05=79.7 15=110.9 25=156.7 35=225.7

06=82.5 16=114.8 26=162.2 36=233.6

07=85.4 17=118.8 27=167.9 37=241.8

08=88.5 18=123.0 28=173.8 38=250.3

09=91.5 19=127.3 29=179.9

10=94.8 20=131.8 30=186.2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Radio Handbücher

Radio Shack

Radio Shack TRC-447 Bedienungsanleitung

Radio Shack

Radio Shack 120-0914 Bedienungsanleitung

Radio Shack

Radio Shack PRO-651 Bedienungsanleitung

Radio Shack

Radio Shack iScan 20-107 Bedienungsanleitung

Radio Shack

Radio Shack 12-807 Bedienungsanleitung

Radio Shack

Radio Shack 21-1840 Bedienungsanleitung

Radio Shack

Radio Shack 120-0615 Bedienungsanleitung

Radio Shack

Radio Shack Pro-2045 Bedienungsanleitung

Radio Shack

Radio Shack 2000655 Bedienungsanleitung

Radio Shack

Radio Shack 12-262 Bedienungsanleitung

Radio Shack

Radio Shack TRC-511 Bedienungsanleitung

Radio Shack

Radio Shack 21-1576 Bedienungsanleitung

Radio Shack

Radio Shack iSCAN PRO-18 Bedienungsanleitung

Radio Shack

Radio Shack TRC-446 Bedienungsanleitung

Radio Shack

Radio Shack 12-827 Bedienungsanleitung

Radio Shack

Radio Shack 1201518 Bedienungsanleitung

Radio Shack

Radio Shack 1201475 Bedienungsanleitung

Radio Shack

Radio Shack 2000629 Bedienungsanleitung

Radio Shack

Radio Shack TRC-502 Bedienungsanleitung

Radio Shack

Radio Shack PRO-652 Bedienungsanleitung

Radio Shack

Radio Shack 21-1706 Bedienungsanleitung

Radio Shack

Radio Shack STEREO MATE 12-791 Bedienungsanleitung

Radio Shack

Radio Shack 200 Ch VHF/Air/UHF Home Scanner Bedienungsanleitung

Radio Shack

Radio Shack 1200093 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung

PRESIDENT

PRESIDENT TEDDY R. Bedienungsanleitung

FRIENDCOM

FRIENDCOM FC-302V Bedienungsanleitung