Radio Shack 1500458 Bedienungsanleitung

Wired IR Repeater

1500458

User’s Guide

We hope you enjoy your Wired IR Repeater from

RadioShack. Please read this user’s guide before setting

up and using your new repeater.

Package Contents

• IR Repeater Box • Transmitter

• Receiver • Extension Cable

• AC Adapter • Mounting Screws (2)

• User’s Guide

Features

• Extend the range of an infrared (IR) remote control so

you can control up to six A/V devices up to 23 feet (7m)

• Control your devices located behind closed doors or

walls or hidden in a cabinet or closet

• Extra long extension cable gives you ﬂexibility in

where you locate your devices

Speciﬁcations

Input.........................................100 – 240V AC, 50/60Hz, 0.18A

Output ....................................................................... 5V DC, 1A

IR Carrier Frequency............................................... 30 – 60 KHz

Power Consumption.................................................... Max. 1W

Effective Range (R/C to RX) (line of sight)................ 23 ft (7 m)

IR Range (TX to A/V Device) ................................. 1.6 ft (0.5 m)

Extension Cable Length........................................... 6.6 ft (2 m)

Receiver Cable Length............................................. 6.6 ft (2 m)

Transmitter Cable Length ..........................................................

................................3.3 ft (1 m) and 6.6 ft (2 m) for six emitters

Speciﬁcations are subject to change and improvement without notice.

Actual product may vary from the images found in this document.

Set Up the Receiver

Set up the receiver according to the depth of your TV.

1. Route the receiver cable, making sure the infrared

receiver is ﬁxed and stable.

For slim TVs, lay the infrared receiver ﬂat. For

deeper TVs, position the infrared receiver upright as

illustrated.

2. Adhere the receiver to your TV.

Remove the adhesive backing to afﬁx the receiver to

the rear or bottom of your TV, making sure you can

see the infrared receiver from the front of your TV.

Lay ﬂat for

slim TVs

Infrared Receiver

Fold up for

deeper TVs

ver

For slim TVs For deeper

TVs

Set Up the IR Repeater System

1. Use the two supplied mounting screws to mount the

IR repeater box on the wall.

2. Connect the AC adapter to the repeater box’s

POWER port and then to an AC outlet.

3. Plug the receiver into the repeater box’s RX jack.

4. Plug the transmitter into the repeater box’s TX jack.

• The transmitter lets you control up to six devices.

• Position the emitter facing your device’s IR sensor

within 1.6 feet (line of sight). You can remove the

adhesive backing to afﬁx each emitter to a ﬂat surface.

5. Point your remote control (not supplied) at the

receiver within 23 feet (direct line of sight) to control

your A/V device(s).

6. To extend the length of the transmitter cable, plug

the extension cable into the repeater box’s TX jack.

7. Plug the transmitter into the connector of the

extension cable, then position the emitter(s).

n Note:

• Use the supplied AC adapter only. Using an AC adapter

not designed for this product may cause damage.

• Disconnect the AC adapter from the AC outlet before

unplugging it from the IR repeater box.

LED

Flashes

operat

remote

Screw Hole

Transmitter

Maximum

Distance

1.6 feet

(0.5m)

Emitter

Extension Cable

(optional)

6.6 ft (2

15° 15°

Repeater Box

Care and Maintenance

• Keep the IR repeater system dry. Wipe it with a soft

cloth immediately if it gets wet.

• Keep the IR repeater system away from dust and

dirt, and clean it with a damp cloth occasionally. Do

not clean with harsh chemicals, cleaning solvents, or

detergents.

• Do not disassemble or drop the IR repeater system.

• Use and store the IR repeater system only in room

temperature environments.

red when

d by your

control.

Maximum

Distance

23 feet (7m)

Receiver

15°

)

FCC Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult your local RadioShack store or an experienced radio/TV

technician for help.

Changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Part 15 of the FCC rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Limited Warranty

RadioShack warrants this product against defects in materials

and workmanship under normal use by the original purchaser for

ninety (90) days after the date of purchase from a RadioShack-

owned store or an authorized RadioShack franchisee or dealer.

RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES.

This warranty does not cover: (a) damage or failure caused by

or attributable to abuse, misuse, failure to follow instructions,

improper installation or maintenance, alteration, accident, Acts of

God (such as ﬂoods or lightning), or excess voltage or current; (b)

improper or incorrectly performed repairs by persons who are not

a RadioShack Authorized Service Facility; (c) consumables such as

fuses or batteries; (d) ordinary wear and tear or cosmetic damage;

(e) transportation, shipping or insurance costs; (f) costs of product

removal, installation, set-up service, adjustment or reinstallation;

and (g) claims by persons other than the original purchaser.

Should a problem occur that is covered by this warranty, take the

product and the RadioShack sales receipt as proof of purchase

date to any RadioShack store in the U.S. RadioShack will, at its

option, unless otherwise provided by law: (a) repair the product

without charge for parts and labor; (b) replace the product with the

same or a comparable product; or (c) refund the purchase price.

All replaced parts and products, and products on which a refund is

made, become the property of RadioShack. New or reconditioned

parts and products may be used in the performance of warranty

service. Repaired or replaced parts and products are warranted for

the remainder of the original warranty period. You will be charged

for repair or replacement of the product made after the expiration

of the warranty period.

RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND

CONDITIONS NOT STATED IN THIS LIMITED WARRANTY.

ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW,

INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY

AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR

A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF

THE STATED WARRANTY PERIOD.

EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE

NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF

THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH

RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED

DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF

THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES

RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME,

DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN

IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Printed

in China 10B13

1500458

RadioShack is a registered trademark used by

RadioShack Corporation.

Complies with the European Union’s “Restriction of

Hazardous Substances Directive,” which protects

the environment by restricting speciﬁc hazardous

materials and products.

Some states do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may

not apply to you. This warranty gives you speciﬁc legal rights, and

you may also have other rights which vary from state to state. You

may contact RadioShack at:

RadioShack Customer Relations

300 RadioShack Circle

Fort Worth, TX 76102 04/08

www.RadioShack.com

Inhaltsverzeichnis

Andere Radio Shack Repeater Handbücher

Radio Shack

Radio Shack Melody Maker Bedienungsanleitung

Beliebte Repeater Handbücher anderer Marken

Gigaset

Gigaset 108 Bedienungsanleitung

Kenwood

Kenwood TKR-750-850 Stücklistenhandbuch

Asus

Asus RP-AC51 Bedienungsanleitung

Exibel

Exibel HRP0101 Bedienungsanleitung

Kidde

Kidde Vega Bedienungsanleitung

Telcosat

Telcosat RBB 850 Installationsanleitung

York

York Universal LINC485 Bedienungsanleitung

MIKOM

MIKOM MRx01B Power Series Bedienungsanleitung

Simrad

Simrad RD 301 Bedienungsanleitung

Tait

Tait TB7304 Bedienungsanleitung

R-tron

R-tron RSN-CDMA-37-C Bedienungsanleitung

Inventronics

Inventronics DALI REPEATER SO Bedienungsanleitung

XFP

XFP 16 Bedienungsanleitung

Andrew

Andrew MRx18 Bedienungsanleitung

COMBA

COMBA RXA3748 Bedienungsanleitung

ADRF

ADRF SDR-ICS-43 Bedienungsanleitung

Teltonika

Teltonika WRP100 Bedienungsanleitung

U-Prox

U-Prox HW Bedienungsanleitung