Radio Shack Easy Remote Bedienungsanleitung

Cat. No. 15-1916B

OWNER’S MANUAL

3 in 1 Easy Remote

Please read before using this equipment.

MUTE LAST

VOL CHAN

PPWR

TV VCR CBL

3IN 1

EASY REMOTE

REWIND PLAY FAST F

RECORD STOP PAUSE

15-1916b.fm Page 1 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

INTRODUCTION

Your RadioShack 3 in 1 Easy Remote can re-

place up to three standard infrared remote con-

trols.

Unlike some universal remote controls, the 3 in 1

preprogrammed

and does not have to learn its

commands from the original remote controls. All

you have to do is tell the 3 in 1 which remote con-

trols you want it to replace.

After you’ve entered the manufacturers’ codes for

your original remotes, the 3 in 1 is automatically

ready to operate most of the same functions as

the original remotes. (This manual includes a list

of manufacturers’ codes for TVs, VCRs, and ca-

ble converters.)

Your 3 in 1 remote has these features:

Replaces Other Remotes — lets you replace up

to three remote controls with one easy-to-use re-

mote control.

Powerful Infrared Beam — in many cases, lets

you operate your remote-controlled devices from

a greater distance than with the original remote

controls.

Convenient Ke

pad Desi

n— places each

control key in the best position for easy operation.

Hand

Reference Label — provides a conve-

nient place for you to write down the manufactur-

ers’ codes.

Toll Free Support — you can get expert help for

your 3 in 1 by calling 1-800-955-2599.

Note: You need two AAA batteries (not supplied)

to operate your 3 in 1 remote.

RadioShack is a registered trademark used by

Tandy Corporation

15-1916b.fm Page 2 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

CONTENTS

How the 3 in 1 Works ..................................... 4

Preparation ..................................................... 5

Installing Batteries ...................................... 5

Setting Up Your Remote Control ................ 6

Operation ........................................................ 8

Punch Through .......................................... 8

Favorite Channel Scan .............................. 9

Clearing Favorite Channel Scan ................ 9

Manufacturers’ Codes ................................. 10

Cable Converters.......................................10

Televisions .................................................12

TV/VCR Combinations...............................16

VCRs..........................................................17

If You Have Problems .................................. 23

Manual Code Search ............................... 23

Determining the 3-Digit Code ................... 23

Troubleshooting ....................................... 25

Care and Maintenance ................................. 26

Specifications .............................................. 27

15-1916b.fm Page 3 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

HOW THE 3 IN 1 WORKS

Before you begin to use the 3 in 1, it is helpful to

understand a little about how it works — nothing

technical, only an idea of what you can expect

from it.

After you set up the 3 in 1, its command keys work

like the keys on your original remote controls,

though the labeling might differ slightly. For ex-

ample, a key on your original remote control that

might be labeled PWR ON/OFF is equivalent to

the 3 in 1’s PWR key.

Notes:

•Pis a special key that you use when you set

up (program) the 3 in 1 to replace your origi-

nal remote controls.

•TV, VCR, and CBL are

device

keys. You use

them when you set up the 3 in 1 to replace

your original remote controls. You also use

the device keys during normal operation to

tell the 3 in 1 which device you want to con-

trol.

•PWR (power), MUTE, and LAST (recall) oper-

ate the same as on your original remote con-

trol.

• Whenever you use the 3 in 1’s RECORD key,

you must press it twice. This safety feature

helps prevent you from accidentally erasing

video tapes.

15-1916b.fm Page 4 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

PREPARATION

INSTALLING BATTERIES

Cautions:

• Be sure to have fresh batteries ready to

install before you remove the old batteries.

The 3 in 1’s memory only lasts about a

minute without the batteries. If the memory is

lost, simply re-enter the 3-digit manufactur-

ers’ codes for your remote-controlled

devices.

• Do not mix old and new batteries, different

types of batteries (standard, alkaline, or

rechargeable), or rechargeable batteries of

different capacities.

1.Press the battery

compartment cover

tab and lift off the

cover.

2.Install two AAA alka-

line batteries as indi-

cated by the polarity

symbols marked

inside the compart-

ment.

3.Replace the cover.

When the 3 in 1’s range decreases or the 3 in 1

operates erratically, replace the batteries.

15-1916b.fm Page 5 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

Note: Do not place objects on top of the remote

control after you install the batteries. This can

press down keys and reduce battery life.

SETTING UP YOUR REMOTE

CONTROL

1. Refer to “Manufacturers’ Codes” on Page 10

and write down the codes for your original

remote controls on the provided label.

2. Press the device key for the type of remote

you are replacing (TV, VCR, or CBL).

3. Hold down Puntil the red indicator blinks

twice, then release Pand enter the 3-digit

manufacturer’s code.

For example, to replace a Panasonic TV’s

remote control (manufacturer code 051), you

would press:

TV P 0 5 1

4. When the indicator blinks twice again, point

the 3 in 1 at your device and press PWR. The

device should turn on (or off, if it was on).

Repeat these steps for additional devices.

Notes:

• The punch-through feature is automatically

turned on for the TV’s volume and mute con-

trols. This means that when you select CBL

and press one of the volume buttons or

MUTE, the remote actually sends the codes

to the television to control it, not the cable

converter. If you want to use your cable con-

verter’s volume and mute controls, disable

the punch-through feature for these buttons.

See “Punch Through” on Page 8.

15-1916b.fm Page 6 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

• If the remote does not operate your device,

try other codes listed in “Manufacturers’

Codes” for your brand of TV, VCR, or cable

box. If your device still does not respond, fol-

low the steps outlined in “If You Have Prob-

lems” on Page 23.

15-1916b.fm Page 7 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

OPERATION

1. Press the device key for the device you want

to control.

2. Point the 3 in 1 toward the device and press

PWR to turn it on.

3. Repeat Steps 1 and 2 for other devices.

4. Point the 3 in 1 toward the device you want

to control and press the appropriate device

key, then the desired command keys.

The command keys on the 3 in 1 work the

same as the keys on the device’s original

remote control; however, the labeling might

differ slightly.

5. To turn off the last device you selected, press

PWR. To turn off other devices, press the

device key for the device you want to turn off,

and then press PWR.

PUNCH THROUGH

The punch-through feature lets you control two

differentdevices without pressing the device keys

for each one first. Here’s how it works.

No device uses all of the 3 in 1’s keys. For exam-

ple, a TV is often the only device that uses the

VOL keys, and a VCR is usually the only device

that uses keys such as REWIND, FAST F, and

RECORD.

When you press TV to control a TV, then press

VCR to control a VCR, any keys not used by the

VCR will still control the TV. For example, VOL

still controls the TV’s volume.

If your cable box or VCR has a volume control,

you can turn off the punch-through feature so you

can use the cable box’s or VCR’s volume control

to control the sound (if it can already do so).

15-1916b.fm Page 8 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

If you want to turn off the punch-through feature

and control the volume through your cable box,

hold down Puntil the red indicator blinks twice.

Release P, then press 9 9 3 CBL. When the indi-

cator blinks twice, you can control the volume

through your cable box.

If you want to turn the punch-through feature back

on and control the volume through your TV, hold

down Puntil the red indicator blinks twice. Re-

lease P,then press 9 8 0. When the indicator

blinks twice, you can control the volume using

your TV.

The punch-through feature does not work if the

last two devices you select have the same (or

similar) features. For example, most TVs and

VCRs have channel keys on their remote con-

trols. In this case, you would have to press the de-

sired device key before you use the 3 in 1’s

channel keys.

FAVORITE CHANNEL SCAN

Your 3 in 1 is equipped with a favorite channel

scan (S) key. You can set up the remote to re-

peatedly scan through up to 10 of your favorite

channels on your TV, VCR, or cable box anytime

you press S.

Note: The favorite channel scan key can only be

set up for one device (TV, VCR or CBL). You can-

not set up a favorite channel list for another de-

vice until you clear the existing list.

1. Press the device key (TV, VCR, or CBL) for

the device that will contain your favorite

channel list.

2. Hold down Puntil the 3 in 1’s red light blinks

twice. Release Pand enter 9 9 6.

15-1916b.fm Page 9 Monday, July 19, 1999 12:17 PM

Need help? Call

1-800-955-2599

3. Enter the channel number of the first channel

you want to include in your favorite channel

list. Then press P.

Note: You must press 0before entering a

single digit channel number. If you are enter-

ing a channel that is three digits long, such

as 103, you do not have to press Pafter

entering the channel number.

4. Repeat Step 3 for other channels (up to 10)

you want to include in your list. Then, hold

down Puntil the 3 in 1’s red light blinks twice.

5. To scan through your favorite channel list,

press the device key (TV, VCR, or CBL) for

the device that contains your favorite chan-

nel list, then press S. Your 3 in 1 repeatedly

scans through your favorite channel list,

stopping at each channel for three seconds.

6. To stop at one of your favorite channels while

the 3 in 1 is running through your list, press

any key on the remote (other than S).

Clearing Favorite Channel Scan

1. Hold down Puntil the 3 in 1’s red light blinks

twice, then release P.

2. Press 9 9 6, then hold down Puntil the 3 in

1’s red light blinks twice.

15-1916b.fm Page 10 Monday, July 19, 1999 12:17 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Universalfernbedienung Handbücher

Radio Shack

Radio Shack 15-2127 Bedienungsanleitung

Radio Shack

Radio Shack Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 3-in-One Pocket Remote Bedienungsanleitung

Radio Shack

Radio Shack Plug 'n Power 61-2677C Bedienungsanleitung

Radio Shack

Radio Shack ITZA 2 Bedienungsanleitung

Radio Shack

Radio Shack Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-1981 Bedienungsanleitung

Radio Shack

Radio Shack 15-100 Bedienungsanleitung

Radio Shack

Radio Shack 8-IN-ONE REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM Bedienungsanleitung

Radio Shack

Radio Shack 5-In-One Learning Light-Up Remote Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

Radio Shack

Radio Shack 15-2143 Bedienungsanleitung

Radio Shack

Radio Shack Univer 15-2138 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack 15-2130 Bedienungsanleitung

Radio Shack

Radio Shack 15-2125 Bedienungsanleitung

Radio Shack

Radio Shack 15-2107 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-One Bedienungsanleitung

Radio Shack

Radio Shack 4-in-One Smart Light-Up Remote Control Bedienungsanleitung

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

GE 24929 Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

GE RM94931 Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

GE RM24965 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

GE RM24950 Bedienungsanleitung

Sky

Sky MY Bedienungsanleitung