RADWAG AS X2 PLUS Benutzerhandbuch
Start up Guide
Analytical
and Precision Balances
Analitycal Balances:
• AS X2 PLUS
Precision Balances:
• PS X2
• PS X2.M
• WLC X2
IMMB-04-02-11-21-EN
To view a complete User Manual go to the website or scan QR code:
radwag.com/en/manuals/6972
1. CONTENT
Model: AS X2 PLUS (d = 0.01 mg)
Models: AS X2 PLUS (d = 0.1 mg)
Balance
×1
Balance
×1
Weighing pan
×1
Weighing pan
×1
Draft shield
×1
Draft shield
×1
Centring ring
×1
Bottom insert
×1
Bottom insert
×1
Power adapter*
×1
Power adapter*
×1
Models: WLC X2 (d = 0.1 mg)
Balance
×1
Weighing pan
×1
Draft shield
×1
Bottom insert
×1
Power adapter*
×1
Models: PS X2 (d = 1 mg) | WLC X2 (d = 1 mg)
Balance
×1
Weighing pan
×1
Draft shield
×1
Grounding foot
×1
Foot
×3
Power adapter*
×1
*The plug type may vary by country.
Models: PS 3000.X2
Balance
×1
Weighing pan
×1
Draft shield
×1
Grounding foot
×1
Foot
×3
Power adapter*
×1
fabric dust
cover
×1
PS X2.M
Balance
×1
Weighing pan
×1
Draft shield
×1
Power adapter*
×1
Models: WLC X2 (d = 10 mg)
Balance
×1
Weighing pan
×1
Grounding foot
×1
Foot
×3
Power adapter*
×1
2. UNPACKING
1 2 3
Keep the packaging should a
warranty claim or service be required.
TOP
*The plug type may vary by country.
3. RECOMMENDATIONS AND WARNINGS
4. ACTIVITIES TO BE DONE PRIOR TO OPERATION
+40 °C
+104°F
+10 °C
+50 °F
Operate the device in a room where the temperature ranges between 10–40 °C
(50–104 °F) and where the relative humidity is below 80%.
Place the balance on a solid surface to ensure stability. To obtain stable and
repeatable weighing results, an anti-vibration table is recommended.
Place the balance away from heat
sources. Avoid exposing the balance
to the sunlight.
Avoid air drafts and air movements
at the workstation.
Avoid exposing the balance to amag-
netic field. Do not weigh magnetic
substances.
Make sure that the balance is placed
on an even surface.
Do not place the balance in a hazard-
ous area. Do not weigh explosive
materials.
Do not place the balance on an
unstable ground exposed to shocks
and vibrations.
Keep the transport
lock should a warranty
claim or service be
required.
4.1. Transport lock removal
Models: AS X2 (d = 0.01 mg) | AS X2 (d = 0.1 mg)
1 2
Keep the transport
lock should a warranty
claim or service be
required.
4.2. Grounding spring check
Models: AS X2 (d = 0.01 mg) | AS X2 (d = 0.1 mg) | WLC X2 (d = 0.1 mg)
Models: PS X2.M | WLC X2 (d = 1 mg)
Models: PS X2.M | WLC X2 (d = 1 mg) | WLC X2 (d = 10 mg)
1 2
Check whether the grounding
spring takes its intended
location.
Make sure that the grounding
spring juts slightly out
of the hole.
Check whether the grounding
spring takes its intended
location.
Make sure that the grounding
spring juts slightly out
of the hole.
5. COMPONENTS ASSEMBLY
1 2 3 4
AS X2 (d = 0.01 mg)
Grounding foot
1
1
1
1
2
2
2
2
3
3
Install
the grounding
foot in a freely
selected
opening.
Install
the grounding
foot in a freely
selected
opening.
Models: AS X2 (d = 0.1 mg) |WLC X2 (d = 0.1 mg)
Models: PS X2 (d = 1 mg) | WLC X2 (d = 1 mg)
Models: WLC X2 (d = 10 mg)
PS X2.M
1 2 3
Install
the grounding
foot in a freely
selected
opening.
Models: PS 3000.X2
6. PREPARING FOR WORK
6.1. Temperature stabilisation
6.3. Levelling
Prior to switching the device on, let
it reach room temperature (estimated
stabilisation time: up to 8 hours).
Connect the power adapter
to DC connector.
Connect the power
adapter to the mains.
up to 8 h
1 2 3
6.2. Switching the balance on
To switch the device on,
press ON / OFF key.
Press leveling icon. Check the balance level state. The arows shows
how to move the balance foots to level the balance.
To level the balance turn its feet, keep turning
the feet until the level indicator takes central position.
Correct leveling screen. Press button
to end the operation.
USB 1 USB 2
7. PANEL AND SCREEN
7.1. Panel keys
7.2. Home screen
Proximity sensor Proximity sensor
Switching ON/OFFHome screen
Displaying
previous screen
Editable tool bar
with quick access keys
Editable information fields
(labels, text fields and buttons)
Confirming an operation
or printing a report
Working modes list List of current working
mode functions
Taring
Weighing result window
Status bar
Parameters Adjustment Header
printout
Footer
printout
Tare Units Products
database
Operators
database
Databases
Zeroing
Autolevel*
*only in PLUS balances
8. BASIC OPERATIONS
8.1.1. Adjustment (for models with an internal adjustment only)
0.00000
Tare:
0.00000 g
User:
Gross:
0.00000 g
Product:
Weighing
Internal adjustment
Adjustment
Please wait...
1 2
Press “Adjustment” button. Wait for the process completion.
8.1.2. Adjustment (for models with an external adjustment only)
Balance model Mass standard
WLC 0.6.X2 500 g
WLC 2.X2 2 000 g
WLC 6.X2 5 000 g
WLC 10.X2 10 000 g
WLC 1/10.X2 10 000 g
WLC 20.X2 20 000 g
WLC 21.X2 20 000 g
The adjustment mass standard does not come with
the balance. Prior to adjustment prepare the right
mass standard. You are recommended to use mass
standard of class F1 or F2. View the table and
select the mass standard you need.
External adjustment is carried out using an external mass
standard of the right accuracy and weight value, which value
depends on balance type and capacity.
1 2
Press “Adjustment” button.
Wait for completion of the start mass
determination process.
Make sure that the weighing pan is empty
and press button to confirm.
Load the weighing pan with mass standard
and press button to confirm.
3 4
Andere Handbücher für AS X2 PLUS
2
Dieses Handbuch passt für folgende Modelle
5
Andere RADWAG Skala Handbücher
RADWAG
RADWAG PM 5Y Benutzerhandbuch
RADWAG
RADWAG AS X2 Series Bedienungsanleitung
RADWAG
RADWAG AS R2 Bedienungsanleitung
RADWAG
RADWAG ITKU-20-02-01-12-A Bedienungsanleitung
RADWAG
RADWAG PS Series Bedienungsanleitung
RADWAG
RADWAG PM C32 Benutzerhandbuch
RADWAG
RADWAG C315 Series Bedienungsanleitung
RADWAG
RADWAG WLT L Series Bedienungsanleitung
RADWAG
RADWAG UYA 4Y PLUS Benutzerhandbuch
RADWAG
RADWAG WPY/KB series Bedienungsanleitung
RADWAG
RADWAG WTC 200 Benutzerhandbuch
RADWAG
RADWAG AS series Bedienungsanleitung
RADWAG
RADWAG PS 200/2000 R2 Bedienungsanleitung
RADWAG
RADWAG WPT Bedienungsanleitung
RADWAG
RADWAG AS R2.PLUS Bedienungsanleitung
RADWAG
RADWAG WTC series Bedienungsanleitung
RADWAG
RADWAG C315 Series Bedienungsanleitung
RADWAG
RADWAG AS PLUS Series Bedienungsanleitung
RADWAG
RADWAG WTC series Bedienungsanleitung
RADWAG
RADWAG CY10 Bedienungsanleitung
