Rae EchoView Bedienungsanleitung

Rev. D

August 2014

P/N F04-4001-000

EchoView

User’s Guide

EchoView User’s Guide

Contents

1Warnings.................................................................................. 5

1.1 Operation Area and Conditions ................................. 7

1.1.1 Hazardous Areas classified by Zones ................. 7

1.1.2 Hazardous Areas classified by Divisions............ 7

1.2 Instruction For Safe Use ............................................ 8

1.3 Use In Hazardous Areas............................................. 8

2Standard Kit ............................................................................. 9

3General Information................................................................. 9

3.1 Key Features ............................................................ 10

4Physical Description .............................................................. 11

4.1 LCD Display (Monitoring) ...................................... 12

4.2 LCD Display (In Alarm).......................................... 12

4.3 Specifications........................................................... 13

5Operation................................................................................ 14

5.1 Enable The FMC2000 Controller’s EchoView

Function ................................................................... 14

5.2 Turning The EchoView On...................................... 15

5.3 Turning The EchoView Off..................................... 17

5.4 Battery Charge Indicator.......................................... 17

5.5 Buzzer (Audible Alarm) Off Indicator .................... 18

5.6 Wireless Communication Indicator ......................... 18

6Deploying The EchoView...................................................... 19

7Programming The EchoView ................................................ 19

7.1 Settings..................................................................... 21

7.1.1 Buzzer On/Off................................................... 22

7.1.2 LCD Contrast.................................................... 22

7.1.3 Serial Number................................................... 23

7.1.4 Firmware Version ............................................. 24

7.1.5 Factory Reset .................................................... 24

7.1.6 Edit Password.................................................... 25

7.1.7 Exit.................................................................... 26

7.2 Wireless.................................................................... 27

7.2.1 Ping Net ............................................................ 28

7.2.2 PAN ID Setup................................................... 29

7.2.3 Join Net............................................................. 30

EchoView User’s Guide

7.2.4 Channel Setup................................................... 31

7.2.5 Exit.................................................................... 32

7.3 Viewing Monitors’ Data (Anytime)......................... 33

7.4 Backlight.................................................................. 33

8Viewing Alarm Data.............................................................. 34

8.1 One Monitor In Alarm ............................................. 35

8.2 Multiple Monitors In Alarm..................................... 35

9“Panic” Function.................................................................... 37

9.1 Enabling/Disabling The “Panic Button” Function... 37

9.2 Using The “Panic” Function .................................... 39

9.2.1 Trigger All Relays............................................. 39

9.2.2 Trigger A Selected Relay.................................. 39

9.2.3 Clear Relays...................................................... 40

10 Internal Battery Replacement ......................................... 41

10.1 Proper Battery Disposal........................................... 42

11 Troubleshooting.............................................................. 43

12 EchoView Alarm Signal Summary.............................. 45

13 Appendix A: EchoView Installation............................... 46

13.1 Magnet-Mount Installation ...................................... 46

13.2 Fixed Installation ..................................................... 47

13.3 Magnetic Mount Alternative Installation................. 50

14 Appendix B: PowerPak External Battery Replacement.. 51

14.1 External Battery Usage ............................................ 51

14.2 External Battery Replacement Process.................... 54

EchoView User’s Guide

1 WARNINGS

Read Before Operating

This manual must be carefully read by all individuals who have or will

have the responsibility of using, maintaining, or servicing this product.

The product will perform as designed only if it is used, maintained, and

serviced in accordance with the manufacturer’s instructions.

Warning:

Use only the Lithium battery or external rechargeable battery provided

by RAE Systems. This instrument has not been tested in an explosive

gas/air atmosphere having an oxygen concentration greater than 21%.

Substitution of components may impair suitability for intrinsic safety.

Replace batteries only in non-hazardous locations.

STATIC HAZARD: Clean only with a damp cloth.

For safety reasons this equipment must be operated and serviced by

qualified personnel only. Read and understand instruction manual

completely before operating or servicing. Any rapid up-scale reading

followed by a declining or erratic reading may indicate a gas

concentration beyond upper scale limit, which may be hazardous.

EchoView User’s Guide

Marking

The EchoView is certified according to the IECEx scheme, ATEX

and CSA for US and Canada as protected by intrinsic safety.

The product is marked with the following information:

RAE SYSTEMS

3775 N. 1st. St., San Jose

CA 95134, USA

FMC-400

Serial No/barcode: XXX-XXXX-000

IECEx TSA

10.0016X

Ex ia IIC T4

Ex ia I

0575

IM1/II 1G

Ex ia IIC T4

Ex ia I

DNV 10 ATEX 83388X

Class I, Gr. A,B,C,D

Intrinsically Safe

-40º C ≤Tamb ≤50º C

Warnings:

Use only RAE 500-0111-000 for internal battery. Do not replace

internal battery in hazardous locations.

Ui: 3.6V; Ci: 78µF; Li/Ri: 3.5µH/ohm

Understand User’s Manual before operating or servicing.

Substitution of components may impair intrinsic safety.

To prevent ignition of flammable or combustible atmospheres,

disconnect power before servicing.

EchoView User’s Guide

Applied Standards

IECEx

ATEX

North America

IEC 60079-

0:2004

EN 60079-

0:2006

CAN/CSA-C22.2 No. 0-M91

IEC 60079-

11:2006

EN 60079-

11:2007

CAN/CSA-C22.2 No. 157-

C22.2 No. 142-M1987

UL 913

UL916

Brazil Radio Specifications

Radio model: RM2400A

Frequency range: 2.400 to 2.4835GHz

Modulation: 802.15.4 DSSS BPSK

RF power(Tx): 20dBm

Data rate: 250kbps

1.1 Operation Area and Conditions

1.1.1 Hazardous Areas classified by Zones

EchoView is intended to be used in hazardous areas or mines

susceptible to firedamp classified zone 0, zone 1 or zone 2, within

the temperature range of -40º C to +50º C, where gases of

explosion groups IIA, IIB or IIC and T4 may be present.

1.1.2 Hazardous Areas classified by Divisions

EchoView is intended to be used in hazardous areas classified for

Class I Div. 1 or 2, within the temperature range of

-40º C to +50º C, where gases of explosion groups A, B, C or D

and temperature class T4 may be present.

EchoView User’s Guide

1.2 Instruction For Safe Use

Strictly follow the instructions for safe use. Application of the

EchoView requires full understanding and strict observation of the

instructions.

1.3 Use In Hazardous Areas

Equipment which is intended for use in explosive atmospheres and

which has been assessed and certified according to international

regulations may be used only under specified conditions. The

components may not be modified in any way.

The appropriate regulations for service and repair must be properly

observed during such activities.

EchoView User’s Guide

2 Standard Kit

EchoView with antenna

Maintenance tool

User’s Guide

3 General Information

The EchoView wirelessly receives the data shown on an FMC2000

controller in a MeshGuard network and displays them on its screen and

delivers audible and visible alerts. The EchoView contains no sensors. Its

built-in radio board operates on a frequency of 2.4GHz and complies

with IEEE 802.15.4 standard. It works with the FMC2000 wireless

controller on a flexible, robust wireless network to provide reliable, low-

cost operation. Up to four EchoViews can operate on a single network. It

also works in a ProRAE Guardian network with a PC.

EchoView User’s Guide

3.1 Key Features

Up to 45 days continuous operation using external battery box

IEEE 802.15.4 Mesh network functionality with 64-bit encryption

Mesh network with auto network forming and configuration

Operating distance: up to 300 m, line of sight

Very low-cost installation −no hardwiring involved

Large area coverage with multi-hop mesh network

Field-replaceable battery

Loud audio alarm, 90dB @ 30cm (12″)

Easy-to-read continuous display of signal strength

Bright red flashing alarm

Highly resistant to RFI interference

IP-65 rated for outdoor use in harsh environments

Inhaltsverzeichnis

Andere Rae Controller Handbücher

Rae

Rae FMC-60 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung