Rain Bird ESP-LXD Betriebsanleitung

ESP-LXD Controller

Programming Guide

Symbols

 NOTE:Symbolisintendedtoalertthe user to importantoperating,

functionality or maintenance or installation instructions.

 WARNING: Symbol is intended to alert the user to the presence

of electricity within the controller which may constitute a risk of

electronic shock or other hazard.

 CAUTION: Symbol is intended to alert the user to important

instructions or conditions that could seriously aect irrigation

eectivity or controller operation.

 DIAL: Symbol indicates that the user is required to turn the dial

on the controller to the appropriate setting in order to follow

subsequent instructions as described in that section.

 REPEAT: Symbol indicates that a repetition of previous steps

or actions may be required in order to continue or complete the

controller programming process.

Storing the Programming Guide

Return the Programming Guide to a permanent, safe location when

you’re nished working with it. We recommend hanging it on the hook

inside the controller cabinet door as shown below.

For technical assistance contact Rain Bird at 1-800-247-3782

Visit us on the web at www.rainbird.com

ESP-LXD Controller

How To Use The Programming Guide

Program Information Fold-out Sheet

A

Open booklet to back page.

B

Open program information fold-out sheet.

D

Flip booklet over to enter or review common system and program

data (on the fold-out sheet above) corresponding to data for the

individual stations (on programming pages below).

C

Close booklet so that

fold-out sheet is oriented

above the programming

pages.

2ESP-LXD Controller

Apply Decoder Address Labels

Before you begin programming, apply your eld decoder barcode

labels to the appropriate elds on the Programming Guide.

A

Carefully peel the station, master valve, ow or weather sensor

sensor decoder barcode label o of the decoder.

B

Apply the decoder address labels in the appropriate elds on the

Programming Guide.

 Repeat this process to apply additional barcode labels to the

programming chart.

 NOTE: An optional Programming Backup Cartridge (PBC) is

available for the ESP-LXD controller, which allows you to create

and Restore multiple Backups of irrigation programs. With a PBC

cartridge installed, you can also set up Field Decoder addresses

by using a barcode scanning pen to read the removable barcode

labels attached to Rain Bird’s eld decoders. See Section E of the

ESP-LXD Controller Installation, Programming and Operation

Guide for more details. Or see page 26 of this Programming Guide

for more details on setting up a barcode scanning pen.

Fill Out Programming Guide

Before you begin programming, ll out the Programming Guide.

Sample Programming information is shown on the following

pages.

C

Enter information about your system hardware and settings in the

appropriate elds on the Programming Guide.

ESP-LXD Controller

Sample Programming Guide

Information (1)

A

Enter custom Program Names for your

programs in these elds.

B

Enter Days To Water for each program:

 For Custom cycle, check the

specic days of the week to

include for irrigation.

 For Cyclical schedule, enter the

cycle period. For example, a “3”

DayCycle indicates irrigation will

occur every third day.

 For Odd/Even day watering, check

Odd, Even, or Odd 31.

C

Enter Watering Start Time(s). You may

enter up to eight start times for each

program, but only one start time is

needed for a program to run. Circle

either “am” or “pm”.

D

Enter the Seasonal Adjust by Month

percentages (if you are using them).

E

Check “ON” in the Monthly Seasonal

Adjust row for each program that will

use the monthly percentages.

F

Enter the Seasonal Adjust by Program

percentage (if you are using it). The

Seasonal Adjust for sample Program

A is set to 80%, and the Monthly

Seasonal Adjust box is left unchecked.

G

Enter the Station Delay for each

program (if desired). In the sample,

Program A has a one-minute delay

between valves. When valve 1 ends,

the controller waits one minute before

starting valve 2. There will also be a

one-minute delay between valve 2

and valve 3, etc. A station delay setting

applies to all programs.

H

Enter the Maximum Number of

SimulStations allowed per program.

In the sample, Program A is allowed to

run a maximum number of 4 programs

simultaneously.

I

Enter the Water Window Start and End

Time(s) for each program (if you’re

using them). Circle either “am” or “pm”.

Turf Shrub

10:00 11:45 1:00

2:15

4:30

5:30

X X X

100

1 min

10:00

6:00

XXX

1 2

4ESP-LXD Controller

Sample Programming Guide

Information (2)

A

Apply Master Valve (MV) Decoder

Address Labels in these elds.

B

Enter Description of the MV.

C

Check if the MV is normally open (NO)

or normally closed (NC).

D

Check if the MV is allowed to open

during the MV Manual Water Window.

E

Apply Flow Sensor Decoder Address

Labels in these elds.

F

Enter Description of the ow sensor.

G

Enter the Type of ow sensor.

H

Species which Master Valve (MV) the

sensor is connected to.

I

Apply Weather Sensor Decoder

Address Labels in these elds.

J

Enter Description of the weather

sensor

K

Enter the Type of weather sensor.

L

Check which Action the sensor

performs (prevent or pause).

M

Enter the Master Valve (MV) Manual

Water Window Open and Close

Time(s). Circle either “am” or “pm”.

N

Enter the Maximum Flow Rate.

O

Enter Days of the Week for the water

window to be active.

P

Check Pipe Size Units of measurement

that you’re using; inches or metric.

Q

Enter the Flow Units that you’re using;

GPM or other.

R

List of Rain Bird decoder models.

S

Enter the Maximum Flow Rate for each

Flow Zone in these elds.

T

List of Rain Bird valve types.

U

Enter the System Valve Types that your

system uses.

V

List of Rain Bird ow sensors.

7:00

4:00

120 X X X

120

Pump

Meter

Pump

Meter

WR2-RC

WR2-RFC

FS400P

FS200P

Rain

Freeze

n o p q r

ESP-LXD Controller

Sample Programming Guide

Information (3, 4)

A

Apply Station Decoder Address labels

in these elds.

B

Enter description of the Valve Type.

C

Enter Description of the decoder

model.

D

Check which Master Valve (MV) the

station uses.

E

Enter the Station Flow Rate

F

Check if the station obeys a Local

Sensor.

G

Check if the station obeys a Weather

Sensor.

H

Check the FloZone source.

I

Enter description of the Station.

J

Check the station’s Priority here.

K

Enter the Station Cycle Time (if you’re

using Cycle+SoakTM).

L

Enter the Station Soak Time (if you’re

using Cycle+SoakTM).

M

Enter Station Run Time(s) for each

program (A, B, C and D).

V2 X

FD101

FD102

X X X

Entry-Sprays

Entry-Color Beds

5 min 30 min 10 min

5 min

a b c d e f g h

i j k l m

Station

Number

Station

Station Decoder

Address Label

Valve

Type

Decoder

Model

Station

Uses MV

Station

Flow Rate

Obey

Local

Sensor

Obey

Weather

Sensor

FloZone

Source

12345 123 12345

Station

#Description Priority

N = Non Irrigation

Station

Cycle Time

Station

Soak Time

Program A

Station Run Time

Program B

Station Run Time

Program C

Station Run Time

Program D

Station Run Time

Station

Number

Station

Station Decoder

Address Label

Valve

Type

Decoder

Model

Station

Uses MV

Station

Flow Rate

Obey

Local

Sensor

Obey

Weather

Sensor

FloZone

Source

Station

#Description Priority

N = Non Irrigation

Station

Cycle Time

Station

Soak Time

Program A

Station Run Time

Program B

Station Run Time

Program C

Station Run Time

Program D

Station Run Time

Station

Number

Station

Station Decoder

Address Label

Valve

Type

Decoder

Model

Station

Uses MV

Station

Flow Rate

Obey

Local

Sensor

Obey

Weather

Sensor

FloZone

Source

Station

#Description Priority

N = Non Irrigation

Station

Cycle Time

Station

Soak Time

Program A

Station Run Time

Program B

Station Run Time

Program C

Station Run Time

Program D

Station Run Time

Station

Number

Station

Station Decoder

Address Label

Valve

Type

Decoder

Model

Station

Uses MV

Station

Flow Rate

Obey

Local

Sensor

Obey

Weather

Sensor

FloZone

Source

Station

#Description Priority

N = Non Irrigation

Station

Cycle Time

Station

Soak Time

Program A

Station Run Time

Program B

Station Run Time

Program C

Station Run Time

Program D

Station Run Time

H M L N

Station

Number

Station

Station Decoder

Address Label

Valve

Type

Decoder

Model

Station

Uses MV

Station

Flow Rate

Obey

Local

Sensor

Obey

Weather

Sensor

FloZone

Source

12345 123 12345

Station

#Description Priority

N = Non Irrigation

Station

Cycle Time

Station

Soak Time

Program A

Station Run Time

Program B

Station Run Time

Program C

Station Run Time

Program D

Station Run Time

Station

Number

Station

Station Decoder

Address Label

Valve

Type

Decoder

Model

Station

Uses MV

Station

Flow Rate

Obey

Local

Sensor

Obey

Weather

Sensor

FloZone

Source

Station

#Description Priority

N = Non Irrigation

Station

Cycle Time

Station

Soak Time

Program A

Station Run Time

Program B

Station Run Time

Program C

Station Run Time

Program D

Station Run Time

Andere Handbücher für ESP-LXD

Inhaltsverzeichnis

Andere Rain Bird Controller Handbücher

Rain Bird

Rain Bird ESP-9V Bedienungsanleitung

Rain Bird

Rain Bird ESP-ME3 Bedienungsanleitung

Rain Bird

Rain Bird LXME2 Installationsanleitung

Rain Bird

Rain Bird PAR+ES Bedienungsanleitung

Rain Bird

Rain Bird ESP-Me Bedienungsanleitung

Rain Bird

Rain Bird ESP-TM2 Bedienungsanleitung

Rain Bird

Rain Bird ESP Installationsanleitung

Rain Bird

Rain Bird ESP-LX Plus Series Leitfaden

Rain Bird

Rain Bird ESP-ME3 Bedienungsanleitung

Rain Bird

Rain Bird ESP-LXIVM Series Merkblatt

Rain Bird

Rain Bird HP Series Bedienungsanleitung

Rain Bird

Rain Bird IQNCCEN Bedienungsanleitung

Rain Bird

Rain Bird ESP-7ME3 Montageanleitung

Rain Bird

Rain Bird ESP-Me Series Bedienungsanleitung

Rain Bird

Rain Bird ESP-RZ Service-Handbuch

Rain Bird

Rain Bird ESP-LXIVM Series Installationsanleitung

Rain Bird

Rain Bird ESP-LXD Installationsanleitung

Rain Bird

Rain Bird ESP-SMT Original Betriebsanleitung

Rain Bird

Rain Bird ESP-LX Bedienungsanleitung

Rain Bird

Rain Bird ESP-4 Montageanleitung

Rain Bird

Rain Bird PRS-D Betriebsanleitung

Rain Bird

Rain Bird EZ1-D Installationshandbuch

Rain Bird

Rain Bird E-6C Bedienungsanleitung

Rain Bird

Rain Bird 9V-2 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung