Rainbow Technologies QPCF Bedienungsanleitung

MODEL NO.: QPCF

Color Quad Processor

Operating Instructions

QPCF-V0.1

This is an intelligent device. Please connect

the video cable on channel one and then power

on. The device will detect system

automatically for PAL or NTSC.

CAUTION

PRECAUTIONS

Safety

 The unit operates on DC12V, 500mA

 To reduce risk of fire or electric shock, do not expose this appliance to rain or moisture.

 Do not attempt to service this unit yourself as opening or removing the cover, it may expose you to

risk of electric shock. Refer servicing to qualified service personnel.

Notice

 The information in this operating instruction was current when published. The manufacturer

reserves the right to revise and improve its products. All specifications are therefore subject to

change without notice.

WELCOME!

Thank you for purchasing COLOR QUAD PROCESSOR. It’s a single page real time color quad processor and

4 channels auto switcher with best quality and price is your only choice. Here are some of the features

you’ll enjoy with this product.

 Real time refresh rate (NTSC: 30 frame/sec.; PAL: 25 frame/sec.)

 High Resolution 720(H) x 484(V) <NTSC> high resolution, 720(H) x 576(V) <PAL>

 Best quality with 16.7 million true colors

 Connect up to 4 + 1(VCR) cameras

 Quad and switch video output

 Independent full screen

 Auto sequential switching

 System auto detection

 Video adjustable on channels

 Video loss indication

 Freeze feature

 VCR Play Zoom Back

 Alarm I/O to cooperate with security system

 OSD user friendly (On Screen Display)

Table of content s

1. INDEX TO PARTS AND CONTROLS…………………………………………………………………..……….…1

1.1 FRONT VIEW

1.2 REAR VIEW

2. SET UP MENUS…………………………………………………………………………………………………...……2,3

2.1 MAIN LIST

2.2 ALARM DURATION

2.3 BAUD RATE

2.4 DWELL TIME

2.5 INT AUDIBLE ALARM

2.6 EXT AUDIBLE ALARM

2.7 SET TIME

2.8 DWELL SET UP

2.9 ALARM POLARITY

2.10 CAMERA TITLE SET UP

2.11 EVENT LIST

2.12 VIDEO SET

2.13 SYSTEM RESET

3. ADDITIONAL OPERATIONS………………………………………………………………….………….………3,4

3.1 FULL SCREEN

3.2 QUAD

3.3 AUTO

3.4 FREEZE

3.5 VCR PLAY BACK

3.6 ALARM & VIDEO LOSS

3.7 ALARM CONNECTOR PIN ASSIGNMENTS

3.8 REMOTE CONTROL OPERATION

4. ADDITIONAL INFORMATION…………………………………………………………………….………………5

4.1 TROUBLESHOOTING

4.2 SPECIFICATIONS

1. INDEX TO PARTS AND CONTROLS

1.1 FRONT VIEW

1. MENU (exit) - It allows access to the system setup menus and exit the current status.

2. (▲) - Displays the CH1 camera in the full screen format. It is also used to select the function

under operating menu.

3. (▼) -Displays the CH2 camera in the full screen format. It is also used to select the function

under operating menu.

4. (◄) -Displays the CH3 camera in the full screen format. It is also used to move the cursor to

necessary location under operating menu.

5. (►) -Displays the CH4 camera in the full screen format. It is also used to move the cursor to

necessary location under operating menu.

6. QUAD ( + ) – Display 4 cameras in quad screen format. It is also used to increase value and select

function under operating menu.

7. AUTO ( - ) – Starts automatic switching of cameras. This button is also used to decrease value and

select function under operating menu.

8. VCR PLAY/FREEZE (enter) - Gets into freeze or VCR play back mode. This button is also used to

confirm/execute the current status.

1.2 REAR VIEW

VIDEO INPUT

500 mA

DC 12V

OUT

QUADVCR

IN OUT

MONITOR ALARM

1. DC12V – This 2.1mm pin jack accepts the center positive source of 12VDC at 500mA.

2. VIDEO INPUT – These BNC connectors accept the composite video output of color cameras.

3. VCR IN – Connect this port to VCR output port.

4. MONITOR OUT – This BNC connector provides a composite video signal to video input of monitor or TV.

5. QUAD OUT – This BNC connector provides a composite video signal to record input of a standard or

time-lapse video recorder.

6. ALARM – Connect to external alarm system.

<1>

2. SET UP MENUS

A convenient system of on-screen menus allows you to set up key features such as sequencer dwell time,

camera titles, camera color and time & date. The following paragraphs take you through the menu

system step-by-step, describing each menu’s purpose and options.

After connecting all cameras and monitor, please make sure you have plugged the power supply to quad

too. Then you’ve already turned on the Digital Color Quad Processor.

2.1 MAIN LIST

1. Press ▲▼ to select function

2. Press ENTER to get into the selection

3. Press MENU to exit the menu

2.2 ALARM DURATION: to set up the alarm duration time

1. Use “+”, “-“ to set this option in seconds (1-99).

2. Press MENU to exit

2.3 BAUD RATE: to set up remote control baud rate

1. Use “+”, “-“ to set remote control baud rate (115200, 57600, 19200, 9600, 4800, 3600, 2400 and 1200)

2. Press MENU to exit

2.4 DWELL TIME: to set up the auto switching time

1. Use “+”, “-“ to set up switching time in seconds (1-30) when it’s on auto switching mode.

2. Press MENU to exit

2.5 INT AUDIBLE ALARM: to set up internal alarm

1. Use

◄► to select the built-in internal alarm ON/OFF

2. Press MENU to exit

2.6 EXT AUDIBLE ALARM: to set up external alarm

1. Use ◄► to set up the external alarm system ON/OFF

2. Press MENU to exit

2.7 SET TIME: to set up date time

1. Use “+”, “-“ to increase/decrease value.

2. Use ◄► to select the item that you would like to set up.

3. Press ENTER to choose the time display mode “ YY/MM/DD/hh/mm/ss “, “DD/MM/YY/hh/mm/ss” or

“TIME DISPLAY OFF”

4. Press MENU to exit

2.8 DWELL SET UP: to set up auto switching channel

1. Press ▲▼ to select channel

2. Use

◄► to select ON/OFF.

3. Press MENU to exit

<2>

(MENU)

►ALARMDURATION:02SEC

BAUD RATE: 9600 BPS

DWELLTIME:02SEC

INT AUDIBLE ALARM: ON OFF

EXT AUDIBLE ALARM: ON OFF

SET TIME: YY:MM:DD:HH:MM:SS

DWELL SETUP (CH 01): ON OFF

ALARM POLARITY (CH 01): HIGH LOW OFF

CAMERA TITLE SETUP (CH 01): CH1

EVENT LIST

VIDEOSET

SYSTEM RESET

2.9 ALARM POLARITY: three options HIGH, LOW or OFF for polarity set up

1. Use ◄► to select polarity.

2. Press ▲▼ to select channel

4. Press MENU to exit

2.10 CAMERA TITLE SETUP: to set up each camera’s title

1. Use

◄► to select the position

2. Press ▲▼ to select channel

3. Use “+”, “-“ to select the words

4. Press MENU to exit

2.11 EVENT LIST: to check the record of video loss or alarm status

1. Press ENTER to clear records

2. Press MENU to exit

2.12 VIDEO SET: video adjustment of each channel

1. Press ENTER, you will get into video adjustment screen

2. Use ▲▼◄► to select the item that you want to set up

3. Use “+”, “-“ to adjust the value of brightness, contrast and color

4. Press MENU to exit

2.13 SYSTEM RESET: Press ENTER, system will go back to default value

3. ADDITIONAL OPERATIONS

3.1 FULL SCREEN

Press any key of full screen, the picture of the corresponding quadrant will fill the whole screen of the

monitor display. Press Quad key, screen will return to quad screen.

3.2 QUAD

Press Quad button, screen will show you 4 cameras in quad screen format.

3.3 AUTO

Press AUTO button, it will enter the auto sequential switching mode. It will display quad and full

screen sequentially according to what you set in the MENU. Press Quad button, it will return to quad

screen.

3.4 FREEZE

For freeze function, just press VCR PLAY/FREEZE (ENTER) button, you will see FREEZE on the right top

screen firstly. Then press the channel that you would like to freeze and you will see Zon the

selected channel. To escape freeze mode, just press VCR PLAY/FREEZE (ENTER) button again.

3.5 VCR PLAY

For VCR play back function, please press VCR PLAY/FREEZE (ENTER) button around 2-3 seconds, you

will see VCR play back picture. You could press full screen or quad button to zoom in the picture

when VCR play back. To escape the VCR play back mode, just press VCR PLAY/FREEZE (ENTER)

button again.

3.6 ALARM & VIDEO LOSS

If you turn on the internal audible alarm and external audible alarm, the right side of camera title

will show when alarm or when video loss.

<3>

CH EVENT YY/MM/DD HH:MM:SS

-----------------------------

CH1 VLOSS 01/02/10 12:20:15

CH2 ALARM 02/01/15 22:10:25

--- ----- --/--/-- --:--:--

Brightness

Contrast

Color

Brightness

Contrast

Color

Brightness

Contrast

Color

Brightness

Contrast

Color

3.7 ALARM CONNECTOR PIN ASSIGNMENTS

3.7.1 25PIN COM PORT: 3.7.2 9PIN COM PORT:

3.8 REMOTE CONTROL OPERATION

If you would like to connect this device to computer, please find following ASCII codes for reference.

A AUTO

Q QUAD

M MENU

V VCR

F FREEZE

1 CH1

2 CH2

3 CH3

4 CH4

<4>

4. ADDITIONAL INFORMATIONS

4.1 TROUBLE SHOOTING

PROBLEM SUGGESTED ACTION

Bad picture quality after power

Please connect the video cable on channel one before power on.

The device will detect system automatically for PAL or NTSC.

No Video 1. Please check if the power supply is connected.

2. Please check if the wiring between monitor and quad is

correct.

Video Loss

Ex. CH1 video loss at 04:08

Please check CH1 camera is connected properly.

Continuous Alarm Please check if there is any disconnection between camera and

quad.

Different Brightness, Color and

Contrast in quad screen.

Please get into VIDEO menu to set up the video parameters of each

camera.

4.2 SPECIFICATION

Video input port 4 +1 (VCR) cameras

Video output port 1 switch & 1 quad output

Alarm input 4

Alarm output 1

Alarm duration 1 – 99 sec.

Camera Title 10 characters

Time / Date set Built-in real time clock

Dwell Time 1 – 30 sec.

RS-232 port Yes

Load impedance 75Ω

Operating environment 10~80%RH, 0oC~50oC

Power source DC 12V ±10%, 500mA

Power consumption 6W maximum

Dimension (mm) 240(W) x 45 (H) x 150 (D)

Weight 1,300g

<5>

LOSS 04:08 CH2

CH3 CH4

Inhaltsverzeichnis

Andere Rainbow Technologies Computerhardware Handbücher

Rainbow Technologies

Rainbow Technologies ICOP-6052VF Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung