RAM Promaster city 2017 Bedienungsanleitung

Key Fob Locking And Unlocking The Doors

Cargo Vehicle (Canada)

Push and release the lock button once to lock

all the doors.

Push and release the unlock button once to

unlock the front two doors.

Push and release the cargo unlock button once

to unlock the cargo area (side lateral sliding

doors and rear doors).

Cargo Vehicle (US) – Passenger Vehicle (All)

Push and release the lock button once to lock

all the doors.

Push and release the unlock button once to

unlock all doors.

Push and release the cargo unlock button once

to unlock the trunk area.

Refer to “A Word About Your Keys” in “Things

To Know Before Starting” in your Owner’s Manual

www.ramtrucks.com/en/owners/manuals for

further information.

Key Fob

1 — Unlock

2 — Lock

3 — Cargo Unlock

KEY FOB

Ignition Position Modes

The key can be turned to 3 different positions:

1. STOP — (OFF/LOCK)

• Engine off

• Key extractable

• Some electrical devices (e.g. sound sys-

tem, power door locking system, etc.) can

operate.

2. MAR — (ACC/ON/RUN)

• Driving position

• All electrical devices are enabled.

3. AVV — (START)

• Engine starting (unstable position).

For further information and applicable warnings

and cautions, please refer to your Owner’s Manual

www.ramtrucks.com/en/owners/manuals.

Ignition Switch Positions

IGNITION

Speed Control

When engaged, the Speed Control takes over

accelerator operations at speeds greater than

25 mph (40 km/h).

The Speed Control buttons are located on the

right side of the steering wheel.

NOTE:

In order to ensure proper operation, the Speed

Control system has been designed to shut down

if multiple Speed Control functions are oper-

ated at the same time. If this occurs, the Speed

Control system can be reactivated by pushing

the Speed Control on/off button and resetting

the desired vehicle set speed.

To Activate

Push the on/off button. The Cruise Control Set

Indicator Light in the instrument cluster display

will illuminate. To turn the system off, push the

on/off button a second time. The Cruise Control

Set Indicator Light will turn off. The system

should be turned off when not in use.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle has

reached the desired speed, push the SET (-)

button and release. Release the accelerator and

the vehicle will operate at the selected speed.

Speed Control Switches

1 — On/Off

2 — Resume +/Accel

3 — Set –/Decel

4 — Cancel

SPEED CONTROL

NOTE:

The vehicle should be traveling at a steady

speed and on level ground before pushing the

SET (-) button.

To Deactivate

A soft tap on the brake pedal, pushing the CANC

button, or normal brake pressure while slowing

the vehicle will deactivate Speed Control without

erasing the set speed memory. Pushing the on/off

button or turning the ignition switch OFF erases

the set speed in memory.

To Resume Speed

To resume a previously set speed, push the

RES (+) button and release. Resume can be

used at any speed above 25 mph (40 km/h).

To Increase Speed

When the Speed Control is set, you can in-

crease speed by pushing the RES (+) button.

To Decrease Speed

When the Speed Control is set, you can de-

crease speed by pushing the SET (-) button.

To Accelerate For Passing

Press the accelerator as you would normally.

When the pedal is released, the vehicle will

return to the set speed.

For further information and applicable warnings

and cautions, please refer to your Owner’s Manual

www.ramtrucks.com/en/owners/manuals.

Parksense Rear Park Assist

If an object is detected behind the rear bumper

while the vehicle is in REVERSE, a chime will

sound. The chime rate will change depending

on the distance of the object from the rear

bumper, getting faster as the object ap-

proaches. The chime will sound continuously

when the distance between the vehicle and the

detected object is less than 12 inches (30 cm).

Parkview Rear Back-Up Camera

You can see an on-screen image of the rear of

your vehicle whenever the gear selector is put

into REVERSE. The ParkView Rear Back-Up

Camera image appears on the display screen

located on the center stack of the instrument

panel.

NOTE:

If the display screen appears foggy, clean the

camera lens located on the rear of the vehicle

above the license plate.

For further information and applicable warnings

and cautions, please refer to your Owner’s Manual

www.ramtrucks.com/en/owners/manuals.

Windshield Wipers And Washers

The windshield wiper/washer lever is located on

the right side of the steering column. There are

five different modes of operation for the front

windshield wipers. The windshield wiper lever

can be raised or lowered to access the modes.

NOTE:

The windshield wipers/washers will only oper-

ate with the ignition in the ON/RUN position.

PARKSENSE WINDSHIELD WIPER/

WASHER FEATURES

For further information and applicable warnings

and cautions, please refer to your Owner’s Manual

www.ramtrucks.com/en/owners/manuals.

Wiper Washer Lever

1 — Front Wiper/Washer

2 — Rear Wiper/Washer

3 — Intermittent, Low And High Speed

4 — Mist

Instrument Cluster Display

The instrument cluster display features a driver

interactive display that is located in the instru-

ment cluster. Pushing the controls on the left

side of the steering column allows the driver to

select vehicle information and Personal Settings.

NOTE:

Not all menus are available when the vehicle is in

drive. The vehicle must be in park to access all

menu screens.

• Push the up arrow button to scroll upward

through the main menus (Speed Beep, Trip

B Data, Set Time, Set Date, Autoclose,

Units, Language, Buzzer Volume, Seat Belt

Buzzer, Service, Daylights, Exit Menu) and

sub menus.

• Push the down arrow button to scroll down-

ward through the main menus and sub

menus.

• Push the MENU button for access to main

menus, sub menus or to select a personal

setting in the setup menu. Push and hold the

MENU button for two seconds to reset fea-

tures.

• Push and hold the MENU button for two

seconds to reset displayed/selected features

that can be reset.

Instrument Cluster Display Controls

INSTRUMENT CLUSTER

DISPLAY

Instrument Cluster Dimming

NOTE:

The instrument cluster display dimmer switch

can only be used to adjust the brightness when

the headlights are turned on.

To adjust the brightness, proceed as follows:

1. Push and release the up or down button to

set the required brightness level.

2. Briefly push and release the MENU button to

go back to the menu screen or push and hold

the MENU (approximately one second) to go

back to the main screen without storing

settings.

Speed Beep

This function makes it possible to set the vehicle

speed limit (MPH or km/h). When this limit is

exceeded the driver is immediately alerted.

To set the desired speed limit, proceed as follows:

• Briefly press the MENU button: the display

will show the wording (Speed Beep)

• Push button or to select speed limit activa-

tion (On) or deactivation (Off)

•

If the function has been activated (On), push

the

up or down arrow buttons to select the

desired speed limit and then push MENU to

confirm.

NOTE:

Setting is possible between 20 and 125 MPH

(30 and 200 km/h), according to the previously set

unit. The setting will increase/decrease by 5 units

each time the up

or down arrow button is pushed.

Hold down either the up or down arrow button to

automatically increase/decrease the setting rap-

idly. Complete the adjustment with single pushes

of the button when you approach the desired

value.

•

Push the

button briefly to return to the

menu screen or hold the button down to return

to the standard screen without storing.

To cancel the setting, proceed as follows:

• Briefly push the MENU button, (On) will flash

on the display

• Push the down arrow button, (Off) will flash

on the display

•

Push the

button briefly to return to the

menu screen or hold the button down to return

to the standard screen without storing.

TRIP BUTTON

The TRIP button, located on the right steering

column stalk, can be used to display and to

reset the previously described values

• A short button push displays the different

values.

• A long button push resets the system and

then starts a new trip.

Trip Functions

Both trip functions are resettable (reset—start of

new trip).

“Trip A” can be used to display the figures

relating to:

• Range

• Trip distance A

• Average Economy A

• Instantaneous Economy

• Average speed A

• Travel time A (driving time)

• Reset Trip B

“Trip B” can be used to display the figures

relating to:

• Trip distance B

• Average Economy B

• Average speed B

• Travel time B (driving time)

• Reset Trip B

Andere Handbücher für promaster city 2017

Inhaltsverzeichnis

Andere RAM Automobil Handbücher

RAM

RAM Truck Gas 2012 Bedienungsanleitung

RAM

RAM ProMaster2015 Bedienungsanleitung

RAM

RAM CHASSIS CAB 2015 Bedienungsanleitung

RAM

RAM 2014 RAM PROMASTER Bedienungsanleitung

RAM

RAM 2014 RAM PROMASTER Betriebsanleitung

RAM

RAM PROMASTER 2018 Bedienungsanleitung

RAM

RAM 1500 2017 Bedienungsanleitung

RAM

RAM 1500 2019 Bedienungsanleitung

RAM

RAM Trucks 1500 Bedienungsanleitung

RAM

RAM Chassis CAB 4500 2016 Bedienungsanleitung

RAM

RAM 2015 ProMaster City Bedienungsanleitung

RAM

RAM Truck 2014 Bedienungsanleitung

RAM

RAM RAM CV 2013 Bedienungsanleitung

RAM

RAM 2011 DAKOTA Bedienungsanleitung

RAM

RAM CHASSIS CAB 3500 2017 Bedienungsanleitung

RAM

RAM 1500 CLASSIC 2020 Bedienungsanleitung

RAM

RAM RAM C 2013 Bedienungsanleitung

RAM

RAM RAM 3500 2013 Bedienungsanleitung

RAM

RAM RAM 2500 Betriebsanleitung

RAM

RAM 1500 2023 Bedienungsanleitung

RAM

RAM PROMASTER CITY2018 Bedienungsanleitung

RAM

RAM TRUCK 1500 2010 Bedienungsanleitung

RAM

RAM 2500 2017 Bedienungsanleitung

RAM

RAM promaster 2017 Bedienungsanleitung

Beliebte Automobil Handbücher anderer Marken

Toyota

Toyota 2000 Tundra Bedienungsanleitung

CITROËN

CITROËN DS4 DSign Bedienungsanleitung

Cadillac

Cadillac CTS 2008 Bedienungsanleitung

Porsche

Porsche Boxster S Bedienungsanleitung

KIAM

KIAM SPORTAGE 2014 Stücklistenhandbuch

GMC

GMC 2013 Terrain Montageanleitung

Lexus

Lexus 2015 CT 200h Bedienungsanleitung

GMC

GMC T-Series 1999 Bedienungsanleitung

Mercury

Mercury 1998 Mystique Bedienungsanleitung

Mercury

Mercury 2007 Mariner Bedienungsanleitung

Mazda

Mazda 2007 Mazdaspeed 3 Leitfaden

Mazda

Mazda 2014 CX-5 Bedienungsanleitung

GMC

GMC Chevrolet Express 2022 Bedienungsanleitung

GMC

GMC 1997 Jimmy Bedienungsanleitung

Chevrolet

Chevrolet 2012 Malibu Bedienungsanleitung

Skoda

Skoda FABIA RS - ANNEXE 118 Bedienungsanleitung

Seat

Seat toledo Bedienungsanleitung

PEUGEOT

PEUGEOT 206 CC Bedienungsanleitung

RAM promaster city 2017 Bedienungsanleitung

Beliebte Automobil Handbücher anderer Marken