RAM Audio LMS 266 / LMS 221 Digital Controller – Hardware Manual
3
IMPORTANT INFORMATION ON SECURITY
The CE mark on the processor LMS 221 / LMS 266 indicates that it is verified and
tested to entirely fulfil the European and international regulations concerning
electromagnetic compatibility and electric safety.
Radiated emissions: EN55013-1 (1996)
RF Immunity: EN55103-2 (1996)
Electric Safety: EN60065 (1993)
IEC65 (1985) and amendments 1, 2 and 3
This product fulfils also the specifications of the following safety directives:
Directive of low voltage: 73/23/EEC
Directives EMC: 89/336/EEC and amendment 93/68/EEC
This product is totally designed and manufactured in the European Union.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
These symbols are internationally accepted and warn of potential damages caused by the
improper manipulation of electric appliances.
The beam pointing down inside an equilateral triangle warns of dangerous voltage existing
inside the appliance. The exclamation mark inside an equilateral triangle reminds the user to
pay attention to the safety indications shown in this manual.
Some of the indications which this sign refers to are:
Do not expose the processor to dust or humidity.
Do not open the processor’s lid.
To avoid damages caused by electric shock, do not manipulate interior
elements.
Only use appropriate and intact power cables.
In case of any strange performance, always contact the technical service.
Unpacking the processor LMS 221 / LMS 266
Before unpacking your processor, make sure that the packing is neither damaged nor
deformed. In case of important anomalies, please contact your transport agency. After
unpacking the product and checking the equipment’s perfect working order, please keep the
original packing just in case you have to return the processor to the distributor.
