Randell 40000 Series Bedienungsanleitung

Randell Manufacturing, Inc.

This manual provides information on installation, operating, maintenance,

troubleshooting & replacement parts for

40000 SERIES

MODELS 4030GA, 40026

NOTIFY CARRIER OF DAMAGE AT ONCE.

It is the responsibility of the consignee to inspect the container upon receipt of same and

to determine the possibility of any damage, including concealed damage. Randell

suggests that if you are suspicious of damage to make a notation on the delivery receipt.

It will be the responsibility of the consignee to file a claim with the carrier. We

recommend that you do so at once.

520 S. Coldwater Road Weidman, Ml 48893-9683

Phone 1-800-621-8560 Fax1-800-634-5369 www.randell.com

TABLE OF CONTENTS

Page 2 ……………………………………….Congratulations

Page 3 ……………………………...Factory Correspondence

Page 4 ……………………………...Serial Number Location

Page 5 …………………………………...Unit Specifications

Page 6 ……………………………Randell Limited Warranty

Page 9 ………………………………………Unit Installation

Page 12 ………………………………………..Unit Operation

Page 12 ……………………………Preventative Maintenance

Page 14 ………………………………………Troubleshooting

Page 15 ………………………………………...Part Diagrams

Congratulations on your recent purchase of Randell food service equipment, and welcome to

the growing family of satisfied Randell customers.

Our reputation for superior products is the result of consistent quality craftsmanship.

From the earliest stages of product design, to successive steps in fabrication and

assembly, rigid standards of excellence are maintained by our staff of designers,

engineers, and skilled employees.

Only the finest heavy-duty materials and parts are used in the production of Randell

brand equipment. This means that each unit, given proper maintenance, will provide years

of trouble free service to its owner.

In addition, all Randell food service equipment is backed by one of the best warranties

in the food service industry and by our professional staff of service technicians.

Retain this manual for future reference.

Notice: Due to a continuous program of product improvement, Randell Manufacturing

reserves the right to make changes in design and specifications without prior

notice.

Notice: Please read the entire manual carefully before

installation.

If certain recommended procedures are not followed, warranty

claims will be denied.

ModelNumber ________________________

Serial Number ________________________

Installation Date ________________________

Randell Manufacturing

Service and Parts

Hot Line

1-800-621-8560

RANDELL MANUFACTURING

SERIAL NUMBER LOCATIONS

FOR THE

4030GA & 40026SSA

This is a sample of a serial number tag.

The serial number tag is located on the outside cabinet.

Unit Specifications

For

4030GA & 40026SSA

4030GA 40026SSA

Model LDHStyle HP Volt AMP NEMA Ship

4030GA 30" 27" 28" Counter top 1/3 115/60/1 75-15P 240

40026A 26" 24" 39" Pass-thru 1/4 115/60/1 55-15P 240

40026SSA 26" 24" 39" Single serve 1/4 115/60/1 55-15P 240

Randell Manufacturing, Inc.

Warranty Policies

Parts Warranty

Randell warrants all component parts of manufactured new equipment to be

free of defects in material or workmanship, and that the equipment meets

or exceeds reasonable industry standards of performance for a period of

one year from the date of shipment from any Randell factory, assembly

plant or warehouse facility.

Note: Warranties are effective from date of shipment, with a

thirty day window to allow for shipment, installation and set up.

In the event equipment was shipped to a site other than the final

installation site, Randell will warranty for a period of three

months following installation, with proof of starting date, up to a

maximum of eighteen months from date of purchase.

Component parts warranty does not cover glass breakage or gasket

replacement. Randell covers all shipping cost related to component part

warranty sent at regular ground rates (UPS, USPS). Freight or postage

incurred for any express or specialty methods of shipping is the

responsibility of the customer.

Labor Coverage

In the unlikely event a Randell manufactured unit fails due to defects in

materials or workmanship within the first ninety days, Randell agrees to

pay reasonable labor incurred. During the first ninety days work

authorizations are not required for in warranty repairs. However, repair

times are limited to certain flex rate schedules and hours will be

deducted from service invoices if they exceed allowed times without prior

approval and a work authorization number. Warranties are effective from

date of shipment, with a 30 day window to allow for shipment, installation

and setup. Where equipment is shipped to any site other than final

installation Randell will honor the labor warranty for a period of ninety

days following installation with proof of starting date, up to a maximum

of nine months from date of purchase. Travel time is limited to one hour

each direction or two hours per invoice. Any travel time exceeding two

hours will be the responsibility of the customer.

Note: Temperature adjustments are not covered under warranty, due

to the wide range of ambient conditions.

Five Year Extended Compressor Warranty

United States installations only:

Randell will pay for the replacement compressor only. Freight, labor,

refrigerant, handling and all other miscellaneous charges are the responsibility

of the customer. Randell will fulfill its warranty obligation by using one of the

four methods provided below, which will be selected by the Randell in house

service technician:

1. Provide reimbursement to servicing customer for the cost of the locally

obtained replacement compressor in exchange for the return of the defective

compressor returned to Randell freight prepaid. Randell does limit the amount of

reimbursement allowed and does require a copy of the local supply house bill for

replacement compressor.

Customer should not pay servicing agent up front for compressor.

2. Provide repair at the manufacturing facility by requiring that the defective

unit be sent back to Randell freight prepaid. Perform repair at the expense of

Randell and ship the item back to job location freight collect.

3. Furnish a replacement compressor freight collect in exchange for the return of

the defective compressor sent back freight prepaid.

4. Furnish complete condensing unit or replacement package freight collect in

exchange for the return of the defective compressor sent back freight prepaid,

(decisions based on whether or not to send complete condensing unit will be made

by Randell in-house service technician).

Export Warranty

Our export warranties will cover all non-electrical parts for the period of one

year from the date of shipment to be free of defects on material and workmanship.

Electrical parts are also covered if ordered and operated on 60 Hz. Electrical

components, ordered and operated on 50 Hz, are warranted for the first 90 days

from shipment only. Service labor is covered for the first 90 days with

authorization from factory prior to service. Warranty is automatically initiated

60 days from ship date. Inbound costs on any factory supplied items would be the

responsibility of the customer. Adherence to recommended equipment maintenance

procedures, according to the owner’s manual provided with each unit, is required

for this warranty to remain in effect, and can have a substantial effect on

extending the service life of your equipment. Equipment abuse voids any warranty.

Extended warranties are not available for parts, labor or compressors on units

shipped outside the United States.

Freight Damage

Any and all freight damage that occurs to a Randell piece of equipment as a result of

carrier handling is not considered warranty, and is not covered under warranty

guidelines. Any freight damage incurred during shipping needs to have a freight claim

filed by the receiver with the shipping carrier (note all damages on freight bill at time

of delivery). Internal or concealed damage may fall under Randell's responsibility

dependent upon the circumstances surrounding each specific incident and are at the

discretion of the Randell in-house service technician.

Gasket Coverage

Randell does not cover gaskets under warranty. Gaskets are a maintenance type component

that are subject to daily wear and tear and are the responsibility of the owner of the

equipment. Because of the unlimited number of customer related circumstances that can

cause gasket failure all gasket replacement issues are considered non-warranty. Randell

recommends thorough cleaning of gaskets on a weekly basis with a mild dish soap and warm

water. With proper care Randell gaskets can last up to two years, at which time we

recommend replacement of all gaskets on the equipment for the best possible performance.

Notice: FOOD LOSS IS NOT COVERED UNDER WARRANTY

Unit Installation

A. Receiving Shipment

Upon arrival, examine the exterior of the shipping crate for signs of abuse. It is

advisable that the shipping crate be partially removed, in order to examine the cabinet

for any possible concealed damages which might have occurred during shipment. If no

damages are evident, replace the crate in order to protect the unit during local

delivery. If the unit is damaged, it should be noted on the delivery slip or bill of

lading and signed to that effect. A claim must be filed immediately against the carrier

indicating the extent and estimated cost of damage occurred.

B. Locating Your New Display Merchandiser

The following conditions should be considered when selecting a location for your unit:

1. Countertop load -The countertop on which the merchandiser will display

rest must be free of vibration and suitably strong enough to support the

combined weights of the units plus the maximum product load weight:

MODEL ACTUAL NEEDED

COUNTER CAPACITY

4030GA 426LBS.

40026A 407LBS.

40026SSA 407LBS.

2. Clearance - There must be a combined total of at least 10" clearance at the top of

the unit.

3. Ventilation - The air cooled self contained display merchandiser requires a

sufficient amount of cool clean air. Avoid placing the unit near heat generating

equipment such as ovens, ranges, heaters, fryers, steam kettles, etc. and out of direct

sunlight. Avoid locating the make table in an unheated room or where the room

temperature may drop below 55°F or above 90°F.

C. Electrical Supply

The wiring should be done by a qualified electrician in accordance with local electrical

codes. A properly wired, and grounded outlet will assure proper operation. Please consult

the data plate attached to the compressor to ascertain the correct electrical

requirements. Supply voltage and amperage requirements are located on the serial number

tag.

Note: It is important that a voltage reading be made at the compressor motor electrical

connections, while the unit is in operation, to verify that the correct voltage

required by the compressor is being supplied. Low or high voltage can detrimentally

affect operation and thereby void its warranty.

Note: It is important that your unit has its own dedicated line. Condensing units are

designed to operate with a voltage fluctuation of plus or minus 10% of the voltage

indicated on the unit data plate. Burn out of a condensing unit due to exceeding

voltage limits will void the warranty.

D. Door Inspection

1. Check doors to ensure that they are sealing properly.

2. Check doors for proper alignment.

3. Check doors to ensure that they open and shut freely.

E. Installation Checklist

After the final location of the display merchandiser has been determined refer to the

following checklist prior to start up:

1. Check all exposed refrigeration lines to ensure that they are not kinked, dented or

rubbing together.

2. Check that condenser and evaporator fans rotate freely without striking any stationary

members.

3. Unit must be properly leveled.

4. Plug unit in and turn on main power switch and/or cold control.

5. Refer to the front of this manual for serial number location. Please record this

information in your manual on page 3 now. It will be necessary when ordering

replacement parts or requesting warranty service.

6. Confirm that unit is holding temperature. Set controls to desired temperature for your

particular ambient and altitude.

7. Allow your display merchandiser to operate for approximately 2

hours before putting in food. This allows interior to cool

down to the correct storage temperature.

Note: All motors are oiled and sealed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Randell Kühlschrank Handbücher

Randell

Randell BC-5E Bedienungsanleitung

Randell

Randell 20048SC Bedienungsanleitung

Randell

Randell 67332A Bedienungsanleitung

Randell

Randell RanSpec 60324 Bedienungsanleitung

Randell

Randell 51000 Series Bedienungsanleitung

Randell

Randell RANFG IC-2 Bedienungsanleitung

Randell

Randell 9200-32-7 Bedienungsanleitung

Randell

Randell PT-W-L Series Bedienungsanleitung

Randell

Randell 9215-32-7 Bedienungsanleitung

Randell

Randell FX Series FX-3SS Bedienungsanleitung

Randell

Randell RANFG FRA-1 Bedienungsanleitung

Randell

Randell 53330LPPO Bedienungsanleitung

Randell

Randell RAN SCA-2 Bedienungsanleitung

Randell

Randell 20042R Bedienungsanleitung

Randell

Randell 4327A Bedienungsanleitung

Randell

Randell 2010 Bedienungsanleitung

Randell

Randell 51000-513 Series Bedienungsanleitung

Randell

Randell FX Series FX-1CS Bedienungsanleitung

Randell

Randell 9401-7 Bedienungsanleitung

Randell

Randell FX Series FX1-4N1A Bedienungsanleitung

Randell

Randell 14GFG IC-2 Bedienungsanleitung

Randell

Randell 20042RF Bedienungsanleitung

Randell

Randell 93324 Bedienungsanleitung

Randell

Randell 58324A Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung