Rane HA6S Bedienungsanleitung

User Guide English (2–6)

Guía del usuario Español (7–11)

Guide d’utilisation Français (12–16)

Guida per l’uso Italiano (17–21)

Benutzerhandbuch Deutsch (22–26)

ppendi

English (27)

RANE)

HAGS

User Guide (English)

Introduction

Thanks for purchasing the Rane HA6S! HA6S is a universal, multi-purpose mixer and headphone

amplifier for rehearsal, studio, or stage. Perfect for headphones, in-ear monitors, or personal monitor

mixing, HA6S features six independent high-power stereo amplifiers in one compact rack unit that

delivers maximum audio quality, even at very high or very low volume levels; HA6S has a minimized

circuitry path which means there's less “stuff” for your signal to pass through, keeping your sound

clear and crisp.

•Manufactured under QS9000 certified quality system

•Six independent high-powered headphone amplifiers in a compact, 1RU size

•Supplies six fully independent mixes for up to 18 pairs of headphones

•Stereo Aux Input on each channel with level adjustments

•Additional Direct Input on front panel to mix in additional sources

•Four-segment LED on each channel for easy visual monitoring

•Mono and Left/Right Mutes per channel for two mono mixes per channel

•High-quality components and exceptionally rugged construction

•Servo-balanced, gold-plated XLR and 1/4" TRS connectors

Box Contents

HA6S

Power Cable

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit rane.com.

For additional product support, visit rane.com/support.

Sound Level

Permanent hearing loss may be caused by

exposure to extremely high noise levels. The U.S.

Occupational Safety and Health Administration

(OSHA) has specified permissible exposures to

certain noise levels. According to OSHA,

exposure to high sound pressure levels (SPL) in

excess of these limits may result in hearing loss.

When using equipment capable of generating

high SPL, use hearing protection while such

equipment is under operation.

Hours per da

SPL (dB)Example

8 90 Small gig

6 92 Train

4 95 Subway train

3 97 High-level desktop monitors

2 100 Classical music concert

1.5 102 Riveting machine

1 105 Machine factory

0.5 110 Airport

0.25 or less 115 Rock concert

Features

Front Panel

1. Direct Input: Feeds an external audio source directly into

the main signal path.

2. Input Gain Control: Controls the signal level going to the

Main Inputs.

3. Input Level Meter: Displays the signal level coming from

Main Inputs. For the best quality of input signal, the LED

should range from 0 to +6 dBu. If the Clip LED (in the

Output Level Meter) is always on, reduce the input level

using the Input Gain Control.

4. Aux Input: Provides a separate stereo input signal which

can be mixed with the Main Input signal.

5. L Mute Switch: Mutes the left input signal.

6. R Mute Switch: Mutes the right input signal.

7. Mode Switch: Switches the operational mode between mono and stereo.

8. Mono LED: This LED lights up when the unit is in mono mode. When the LED is off, the unit is in stereo

mode.

9. Headphone Output: 1/4” TRS phone jack used to output the signal of the individual channel. There are

also 12 additional headphone outputs (two for each channel) on the rear panel.

10. Balance Control: Sets the amount of the signal coming from the Aux Input and Main Input. When a

signal is fed into the Aux Input, the balance control will regulate the ratio of the Main Input and the Aux

Input signals.

11. Output Gain Control: Adjusts the output level of the individual channel.

12. Output Level Meter: Displays the output signal level. If the Clip LED lights up, turn down the input gain

control and/or the individual output gain control to avoid distortion.

Rear Panel

13. Power Connector: Use the included power cable to connect this connector to a power source. Please

check the voltage accepted by the unit and the voltage available from your power source before

connecting it.

14. Fuse Holder: If the fuse blows, replace it with a fuse of the same type.

15. Main Input Connectors: Balanced 1/4” TRS and XLR connectors used to input the stereo signal.

16. Main Output Connectors: Balanced 1/4” TRS and XLR connectors used to output the main signal. Use

these connectors to link several headphone amplifiers together.

17. Headphone Out (1-12): These are 12 additional headphone outputs (two for every channel) wired in

parallel with the output available on the front panel.

356

124

8 9

Setup

1. Switch everything on in the following order:

•audio input sources (i.e. instruments, CD/MP3 players)

•HA6S

•speakers/amps

2. When turning off, always reverse this operation:

•speakers/amps

•HA6S

•last, any input sources

Using the Main Input Connectors

1. Connect your source to the rear panel main input connectors on HA6S.

2. Set the input gain (Main section) and the balance control (Channel section) on center position. Set the

output gain of each channel all the way down.

3. Check the input level meter for optimal signal.

4. Connect headphones to HA6S and start to raise the output gain of each channel to the desired listening

volume.

Using the Aux Inputs

You can also play back a signal to feed in a vocal microphone and then connect a mixer’s Aux send to

HA6S’s Aux input. Use the balance control to give the vocalist the desired mix between the voice and the

playback signal. Then, adjust the output gain control to regulate the overall desired volume.

Main

Outputs

Main

Outputs Aux Send

Through the Aux inputs, you can use the six channels of HA6S independently to give individual mixes to six

different musicians. Connect the Aux Sends or Subgroup outputs directly to the Aux input of HA6S. Then

rotate the balance control on your HA6S fully to the left. This will route only the Aux In signal to the

headphones.

Using Multiple Headphones on the Same Channel

Each channel provides three headphone outputs. These jacks are all connected in parallel. For best results,

please note the impedance information:

•When connecting one headphone to each channel, the minimum impedance of the headphone should

be 100 ohms.

•When connecting two headphones to each channel, the minimum impedance of each headphone

should be 200 ohms.

•When connecting three headphones to each channel, the minimum impedance of each headphone

should be 300 ohms.

Aux

Send 1

Aux

Send 2

Aux

Send 3

Aux

Send 4

Aux

Send 5

Aux

Send 6

Installation and Connection

Read the following section carefully. Not paying attention to the input signal level, to the routing of the signal and to

the assignment of the signal will result in unwanted distortion, a corrupted signal or no sound at all.

Power Connection

Use the same fuse as marked on the fuse holder near the power connector. Connect HA6S to a standard power

outlet using the enclosed power cable.

Audio Connection

The HA6S uses balanced XLR and 1/4” (6.35 mm) TRS phones jack. It can be connected to other units in a variety

of ways to support a vast range of applications without experiencing a signal loss.

Wiring Configuration

You can wire your XLR or 1/4” (6.35 mm) TRS cables as balanced or unbalanced. Here are some examples:

Determine the wiring configuration you need for your application and audio connections:

Tip

Sleeve

Pin 2

Pin 3

Pin 1,

linked to Pin 3

Balanced

Unbalanced

Tip

Ring

Sleeve

Tip

Sleeve

Ring

Pin 1

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Sleeve

Center

Screen

Tip

Sleeve Tip

Sleeve

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Sleeve Center

Screen

Tip

Ring

Sleeve

Center

Screen

Pin 3

Tip

Sleeve

Ring

Pin 2

81-------------,8

~~~©

8 8

~~©

§ ;z~---§

~~©

§--i

[§

~~©

~,___~7

[§

~~~(•)

~~(•)

§--i,--.----~

~~~©

§J

[§

Appendix (English)

Technical Specifications

Inputs

Connectors XLR and 1/4” (6.35 mm)

Type Electronically servo-balanced, RF-filtered

Impedance Balanced: > 50 KΩ

Unbalanced: > 25 KΩ

Maximum Input Level +21 dBU typical, balanced or unbalanced

Aux In and Direct In

Connectors 1/4” (6.35 mm) TRS (tip = left; ring = right; sleeve = ground)

Impedance Unbalanced: > 25 KΩ

Maximum Input Level +21 dBU, balanced or unbalanced

Output

Connectors XLR and 1/4” (6.35 mm)

Type Balanced/Unbalanced

Maximum Output Level +21 dBu, balanced and unbalanced

Power Amplifier

Maximum Output Power +21 dBmW

Min. Output Impedance 100 Ω

Maximum Gain +20 dB

Performance

Frequency Response 10 Hz – 50 kHz, +0/-3 dB

Signal-to-Noise Ratio > 90 dB, unweighted

Reference: +4 dBu, 22 Hz – 22 kHz

THD 0.005%

Reference: +4 dBu

Power Power Consumption: 14 watts

Input Voltage: 120 V AC, 60 Hz; 230-240 V AC, 50 Hz

Dimensions

(width x depth x height)

19.0” x 8.54” x 1.7”

483 mm x 217 mm x 44 cm

Weight 6.4 lbs.

2.9 kg

Specifications are subject to change without notice.

Trademarks & Licenses

Rane is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.

All other product names, company names, trademarks, or trade names are those of their respective owners.

rane.com

Manual Version v1.1

Andere Handbücher für HA6S

Inhaltsverzeichnis

Andere Rane Musikmixer Handbücher

Rane

Rane CM 86 Service-Handbuch

Rane

Rane MP 22 Bedienungsanleitung

Rane

Rane HA6S Bedienungsanleitung

Rane

Rane MLM 65 Bedienungsanleitung

Rane

Rane MP 2016A Bedienungsanleitung

Rane

Rane SM 82S Bedienungsanleitung

Rane

Rane SM 82S Bedienungsanleitung

Rane

Rane SIXTY-TWO Bedienungsanleitung

Rane

Rane SIXTY-ONE Bedienungsanleitung

Rane

Rane MP 24z Bedienungsanleitung

Rane

Rane MP 24 Bedienungsanleitung

Rane

Rane TTM57mkll Bedienungsanleitung

Rane

Rane MP26 Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

Rane

Rane TTM 57SL Bedienungsanleitung

Rane

Rane EMPATH Bedienungsanleitung

Rane

Rane SM 82S Bedienungsanleitung

Rane

Rane MP25 Bedienungsanleitung

Rane

Rane FLM 82 Service-Handbuch

Rane

Rane MLM103 Bedienungsanleitung

Rane

Rane ROTARY EMPATH Bedienungsanleitung

Rane

Rane SIXTY-EIGHT Bedienungsanleitung

Rane

Rane MLM82S Bedienungsanleitung

Rane

Rane TTM 57SL Bedienungsanleitung

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Roland

Roland M-160 Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

Roland

Roland SoundCanvas SC-8820 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Roland

Roland M-16E Bedienungsanleitung