RANGEFUL Spear 300 PRO Bedienungsanleitung

Repeater

Spear 300 PRO, Spear 300 V4G, Spear 300 V3G,

Spear 300 V4G-L, Spear 300 V4G-H, Spear 300 V3G-L,

Spear 1000 PRO, Spear 1000 V4G, Spear 1000 V3G,

Spear 1000 V4G-L, Spear 1000 V4G-H, Spear 1000 V3G-L,

Spear 2000 V4G, Spear 2000 V3G, Spear 2000 V4G-L,

Spear 2000 V4G-H, Spear 2000 V3G-L, Spear 2000 V5G

Installation Manual

Rev. 1.3

1. Product Features ......................................................................................3

2. Safety Information ..................................................................................5

3. Functional elements ..............................................................................6

3.1. Appearance of the Repeater ..............................................................6

3.2. LED Display ....................................................................................................7

3.2.1. 5-band ampliﬁcation system .....................................................7

3.2.2. 3-band ampliﬁcation system .....................................................8

3.2.3. 2-band ampliﬁcation system ..................................................10

3.3. Alarm LED .....................................................................................................12

3.4. Manual Gain Control (MGC) ................................................................13

3.5. Smart function ............................................................................................13

4. Installation ................................................................................................13

4.1. General conditions ...................................................................................13

4.2. Outdoor antenna installation ............................................................14

4.3. Indoor antenna installation ................................................................19

4.4. Repeater installation ..............................................................................21

4.5. Lightning Surge Protector Installation .......................................23

5. Troubleshooting .....................................................................................24

6. Contact Information .............................................................................25

Content

1. Product Features

Coverage area

Spear 300 PRO

Spear 300 V4G

Spear 300 V3G

Spear 300 V4G-L

Spear 300 V4G-H

Spear 300 V3G-L

Spear 1000 PRO

Spear 1000 V4G

Spear 1000 V3G

Spear 1000 V4G-L

Spear 1000 V4G-H

Spear 1000 V3G-L

Spear 2000 V4G

Spear 2000 V3G

Spear 2000 V4G-L

Spear 2000 V4G-H

Spear 2000 V3G-L

Spear 2000 V5G

Coverage area Up to 300m2Up to 1000m2Up to 2000m2

Internal

antennas 1-3 Up to 8 Up to 10

Rangeful Spear is an advanced repeater created for boosting 5

diﬀerent types of a mobile signal at the same time and works

for all mobile operators in Europe. This repeater is a perfect

option if you use several mobile operators or need to improve

all types of connection. RANGEFUL Spear is a newly designed

signal repeater with smart functions.

Rangeful Spear is the perfect solution for improving the

mobile signal at home, ofﬁce, restaurant, hotel, apartment

building, warehouse or supermarket, in the quickest time

possible. One repeater covers up to 300, 1000 or 2000 m2

(depends on a repeater modiﬁcation).

Coverage area

Model GSM

calls

900Mhz

4G LTE

internet

800Mhz

GSM

calls

1800Mhz

4G LTE

internet

1800Mhz

internet

900Mhz

4G LTE

internet

2600Mhz

internet

2100Mhz

internet

700Mhz

Spear 300 PRO

Spear 1000 PRO •••••••

Spear 2000 V5G • • • •

Spear 300 V4G

Spear 1000 V4G

Spear 2000 V4G • • • • •

Spear 300 V3G

Spear 1000 V3G

Spear 2000 V3G •••• •

Spear 300 V4G-L

Spear 1000 V4G-L

Spear 2000 V4G-L •••

Spear 300 V4G-H

Spear 1000 V4G-H

Spear 2000 V4G-H • • •

Spear 300 V3G-L

Spear 1000 V3G-L

Spear 2000 V3G-L • • •

Rangeful Spear is compatible with all mobile devices and

supports all services (voice, Internet, SMS, MMS, etc.) provided

by the mobile operators and presented on the site. RANGEFUL

Spear supports all mobile networks in Europe and most

countries of the world.

ATTENTION! Repeater’s signal performance and coverage

area directly depends on the signal performance of the mobile

operator’s base station. Correct installation of the repeater,

antennas and cables is crucial. It is important to understand

that abnormal use of the repeater will lead to its malfunction,

performance deterioration, as well as malfunctions in mobile

operator’s base station. The user is responsible for all possible

problems caused by abnormal use.

•

2. Safety Information

Only qualiﬁed personnel are allowed to install the repeater,

cables and antennas.

The antennas and the cables must be connected only when

the repeater power is oﬀ to avoid damage to the repeater.

Connection to diﬀerent power source than those speciﬁed

may result in equipment malfunction and damage. If the

restrictions are not followed, ﬁre hazard is possible.

Do not disassemble the repeater, install or remove accessories

by yourself. This may result in equipment malfunction or electric

shock.

Do not install the repeater near the heating equipment to

avoid heating the operating repeater.

Do not cover the repeater, as this may aﬀect the heat

dissipation.

1 – Indoor Antenna Connector (N-Female)

2 – Power LED

3 – On / Oﬀ Switch

4~8 – Alarm LED 800 / 900 / 1800 / 2100 / 2600 MHz

9 – Power supply input

10 – Smart function LED

11 – Outdoor Antenna Connector (N-Female)

12 – Ground

3. Functional elements

2 4 5 6 7 8 10

3 9 11 12

3.1. Appearance of the Repeater

8 9 10 11 12

3 4

3.2. LED Display

3.2.1. 5-band ampliﬁcation system

Applies to models Spear 300 PRO, Spear 1000 PRO

1 – 5 bars of the output signal strength indicator, which show

you the maximum output power of the repeater. Each signal bar

represents 5dB.

4 – Antenna Isolation Detection. When the repeater is ﬁrst

powered up, the repeater will detect the oscillation

automatically between the outdoor antenna and indoor

antenna.

5 – Uplink Sleep Mode. The uplink of the repeater is in standby

mode when there is no call or data transmission. It will activate

immediately when a call/data session is initiated.

2 – The speciﬁc value of the input signal strength measured in

dBm, tells the exact input signal level.

3 – Shows the UL&DL central frequency of the supporting

system.

6 – Shows the UL maximum gain.

7 – Shows the DL maximum gain.

3.2.2. 3-band ampliﬁcation system

9 10 11 12 13

5 6 7 8

8 – Selection or conﬁrmation of the settings

LCD screen shows one working frequency at a time, and it will

change automatically each 5 seconds from low frequency to

high frequency.

1 – The line shows the working status of ampliﬁcation system 1.

– The line shows the working status of ampliﬁcation system 2.2 – The line shows the working status of ampliﬁcation system 3.3

Applies to models Spear 300 V4G, Spear 1000 V4G, Spear 2000

V4G, Spear 300 V3G, Spear 1000 V3G, Spear 2000 V3G, Spear

2000 V5G.

9 – Back to the previous page or cancel the settings.

10 – Increase the gain oradjust the center frequency upward.

11 – Decrease the gain or adjust the center frequency downward.

12 – Smart function that repeater could set the gain

automatically to prevent the Alarm. Press this icon to turn ON

or turn OFF this function.

4 – 5 bars of the output signal strength indicator, which shows

you the maximum output power of the repeater. Each signal bar

represents 5dB.

8 – Antenna Isolation detection. When you turn on the repeater

for the ﬁrst time, the repeater automatically detects the

oscillation between the outdoor antenna and the indoor

antenna.

7 – Displays the maximum Upload and Download gain.

6 – Uplink Sleep Mode. The uplink of the repeater is in standby

mode when there is no call or data transmission. It will be

activated immediately when a call or data session is initiated.

5 – The speciﬁc value of input signal strength measured in dBm,

which shows us the exact input signal level.

13 – Smart function. The repeater can automatically adjust the

gain to prevent Alarm.

9 – Enter to select or conﬁrm the settings.

10 – Return to the previous page or cancel the settings.

11 – Increase the gain.

12 – Decrease the gain.

3.2.3. 2-band ampliﬁcation system

9 10 11 12 13

3 4 5 6

Applies to models Spear 300 V4G-L, Spear 1000 V4G-L, Spear

2000 V4G-L, Spear 300 V4G-H, Spear 1000 V4G-H, Spear 2000

V4G-H, Spear 300 V3G-L, Spear 1000 V3G-L, Spear 2000 V3G-L.

1 – The line shows the working status of ampliﬁcation system 1.

5 – Show the maximum Upload gain.

7 – Show the status of Uplink Sleep mode and ISO for system1.

11 – Increase the gain.

9 – Enter or conﬁrm the settings for selection.

13 – Smart function. The repeater can automatically adjust the

gain to prevent Alarm.

2 – The line shows the working status of ampliﬁcation system 2.

6 – Display the Download maximum gain.

8 – Show the status of Uplink Sleep mode and ISO for system2.

12 – Decrease the gain.

10 – Return to the previous page or cancel the settings.

3 – 5 bars of the output signal strength indicator, which shows

you the maximum output power of the repeater. Each signal ba

represents 5dB.

4 – The speciﬁc value of input signal strength measured in dBm,

which shows us the exact input signal level.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere RANGEFUL Repeater Handbücher

RANGEFUL

RANGEFUL Lance 200 PRO Bedienungsanleitung

Beliebte Repeater Handbücher anderer Marken

Gigaset

Gigaset 108 Bedienungsanleitung

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Bedienungsanleitung

Kenwood

Kenwood TKR-750-850 Stücklistenhandbuch

Asus

Asus RP-AC51 Bedienungsanleitung

Exibel

Exibel HRP0101 Bedienungsanleitung

Kidde

Kidde Vega Bedienungsanleitung

Telcosat

Telcosat RBB 850 Installationsanleitung

York

York Universal LINC485 Bedienungsanleitung

MIKOM

MIKOM MRx01B Power Series Bedienungsanleitung

Simrad

Simrad RD 301 Bedienungsanleitung

Tait

Tait TB7304 Bedienungsanleitung

R-tron

R-tron RSN-CDMA-37-C Bedienungsanleitung

Inventronics

Inventronics DALI REPEATER SO Bedienungsanleitung

XFP

XFP 16 Bedienungsanleitung

Andrew

Andrew MRx18 Bedienungsanleitung

COMBA

COMBA RXA3748 Bedienungsanleitung

ADRF

ADRF SDR-ICS-43 Bedienungsanleitung

Teltonika

Teltonika WRP100 Bedienungsanleitung