Raptor DT-826413 Bedienungsanleitung

LED WORK LIGHT

LED-arbejdslampe

LED-arbeidslampe

LED-arbetslampa

LED työvalo

DT-826413

DT-826420

DT-826642

www.raptor-products.com

Instruction Manual

Read the User Instructions carefully before use.

• Save these instructions for future reference.

• Do not look directly into the work lamp when it is switched on.

• Keep out of the reach of children.

• Can be used indoors and outdoors.

• Do not immerse in water or any other liquid.

Technical Parameters

Type: DT-826413 + DT-826420

Colour temperature: 4200K

Rated Power: 45W (250X0.2W)

Supply Current: MAX. 0.2 1A

Power factor: >0.9

Tempered Glass: 347X194X2.3mm

Weight: 2.3kg

Maximum projected area: 0.07m2

Dimensions: 385X315X90mm

Remark: Electric shock protection class: I

External light protection class: IP54

Lamp socket size: LED

Rated voltage: 220-240V~ 50/60Hz

Type: DT-826642

Colour temperature: 4200K

Rated Power: LED: 24W

USB: 5W

Supply Current: MAX. 0.25 A

Power factor: >0.9

Tempered Glass: 254.6X146.5X20.6mm

Weight: 1.2kg

Maximum projected area: 0.07m2

Dimensions: 290X83X234mm

Remark: Electric shock protection class: I

External light protection class: IP54

Lamp socket size: LED

Rated voltage: 220-240V~ 50/60Hz

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to

avoid electric shock.

2. The lamp must be earthed.

3. If the external exible cable or cord of this luminaire is damaged, it must

immediately be replaced by the manufacturer, his service agent or a qualied

technician.

4. Before maintenance work takes place, the power must be switched off. The

maintenance should be done only by a qualied electrician.

5. DT-826413 + DT-826642: The appliance is equipped with sockets. Make sure

that the total output is max 13A. DT-826420 comes with a schuko plug and the

total output is max. 16A.

6. The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

Correct disposal of this product

This marking indicates that this product should not be disposed with other household

wastes throughout the EU. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, recycle it responsibly to promote the

sustainable reuse of material resources. To return your used device, please use the

return and collection systems or contact the retailer where the product was purchased.

They can take this product for environmental safe recycling.

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

E. Switch

F. Socket

G. Bracket

H. Driver

CAUTION:

The light source of the lamp cannot

be replaced, if broken, replace lamp.

Instruktionsmanual

Læs brugsvejledningen nøje før brug.

• Gem brugsvejledningen til fremtidig reference.

• Kig ikke direkte ind i arbejdslampen, når den er tændt.

• Opbevares utilgængeligt for børn.

• Kan bruges både indendørs og udendørs.

• Nedsænk ikke lampen i vand eller andre væsker.

Tekniske parametre

Type: DT-826413 + DT-826420

Farvetemperatur: 4200K

Nominel effekt: 45 W (250 x 0,2 W)

Forsyningsstrøm: MAX. 0,2 1A

Effektfaktor: >0,9

Hærdet glas: 347 x 194 x 2,3 mm

Vægt: 2,3 kg

Maksimal belysningsade: 0,07 m2

Dimensioner: 385 x 315 x 90 mm

Bemærkning: Isolationsklasse: I

Ekstern kapslingsklasse: IP54

Lampefatningsstørrelse: LED

Nominel spænding: 220-240V~ 50/60Hz

Type: DT-826642

Farvetemperatur: 4200K

Nominel effekt: LED: 24 W

USB: 5 W

Forsyningsstrøm: MAX. 0,25 A

Effektfaktor: >0,9

Hærdet glas: 254,6 x 146,5 x 20,6 mm

Vægt: 1,2 kg

Maksimal belysningsade: 0,07 m2

Dimensioner: 290x 83 x 234 mm

Bemærkning: Isolationsklasse: I

Ekstern kapslingsklasse: IP54

Lampefatningsstørrelse: LED

Nominel spænding: 220-240V~ 50/60Hz

Sikkerhedsforskrifter

1. Før montering eller vedligeholdelse skal du altid slukke for strømforsyningen for

at undgå elektrisk stød.

2. Lampen skal have jordforbindelse.

3. Hvis lampens eksterne eksible ledning er beskadiget, skal den med det

samme udskiftes af producenten, en servicetekniker, eller en faglært elektriker

for at undgå farlige situationer.

4. Før der udføres vedligeholdelsesarbejde, skal der slukkes for strømmen.

Vedligeholdelsesarbejdet må kun udføres af en autoriseret elektriker.

5. DT-826413 + DT-826642: Apparatet er udstyret med stik. Sørg for, at det

samlede output er max. 13A.DT-826420 er med schuko stik og det samlede

output er max. 16A.

6. Lampen må kun bruges, når beslaget er udstrakt.

Korrekt bortskaffelse af produktet

Dette mærke betyder, at produktet ikke må bortskaffes sammen med andet husholdningsaffald

i hele EU. For at undgå forurening af miljøet eller skader på menneskers helbred som

følge af ukontrolleret bortskaffelse af affald, bør produktet genbruges ansvarligt for at

fremme bæredygtig genbrug af materialeressourcer. Det brugte apparat kan returneres

via retur- og indsamlingssystemet eller ved at kontakte forhandleren, hvor produktet er

købt. De kan sikre, at produktet genbruges miljømæssigt forsvarligt.

A. Cover

B. LED

C. Hus

D. Håndtag

FORSIGTIG:

Lampens lyskilde kan ikke udskiftes.

Hvis den går i stykker, skal lampen

udskiftes.

E. Kontakt

F. Stik

G. Beslag

H. Driver

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

Bruksanvisning

Les bruksanvisningen nøye før bruk.

• Oppbevar denne bruksanvisningen for fremtidig referanse.

• Ikke se direkte inn i arbeidslampen når den er slått på.

• Oppbevares utenfor barns rekkevidde.

• Kan brukes både innendørs og utendørs.

• Må ikke senkes ned i vann eller annen væske.

Tekniske parametre

Type DT-826413 + DT-826420

Fargetemperatur: 4200K

Nominell effekt: 45 W (250 X 0,2 W)

Tilførselsstrøm: MAX. 0,2 1A

Spenningsfaktor >0,9

Temperert glass: 347 X 194 X 2,3 mm

Vekt: 2,3 kg

Maksimal belysningsate: 0,07 m2

Dimensjoner: 385 X 315 X 90 mm

Kommentar: Elektrisk støt-beskyttelsesklasse: I

Eksternt lys-beskyttelsesklasse: IP54

Størrelse på lampeholder: LED

Nominell spenning: 220-240 V~ 50/60 Hz

Type DT-826642

Fargetemperatur: 4200K

Nominell effekt: LED: 24 W

USB: 5W

Tilførselsstrøm: MAX. 0,25 A

Spenningsfaktor >0,9

Temperert glass: 254,6 X 146,5 X 20,6 mm

Vekt: 1,2 kg

Maksimal belysningsate: 0,07 m2

Dimensjoner: 290 X 83 X 234 mm

Kommentar: Elektrisk støt-beskyttelsesklasse: I

Eksternt lys-beskyttelsesklasse: IP54

Størrelse på lampeholder: LED

Nominell spenning: 220-240 V~ 50/60 Hz

Sikkerhetsinstruksjoner

1. Før montering eller vedlikehold må man alltid slå av strømtilførselen for

å unngå elektrisk støt.

2. Lampen må være jordet.

3. Hvis den eksterne eksible kabelen eller ledningen på denne lysenheten

er skadet, må den straks skiftes ut av produsenten, dennes serviceagent eller

en kvalisert tekniker.

4. Før det utføres vedlikehold må strømmen slås av. Vedlikeholdet skal kun

utføres av en kvalisert elektriker.

5. DT-826413 + DT-826642: Apparatet er utstyrt med stikkontakter. Kontroller at

den totale effekten er max 13A. DT-826420 leveres med schuko stikkontakt,

og samlet strømforbruk er maks. 16 A.

6. Lampen må kun brukes med forlenget brakett.

A. Cover

B. LED

C. Enhet

D. Håndtak

Slik skal dette produktet avhendes

Dette merket indikerer at dette produktet ikke skal avhendes sammen med annet husholdningsavfall I

EU. For å hindre mulig skade på miljø eller menneskelig helse på grunn av ukontrollert

avfallskassering må det kasseres på en ansvarlig måte for å fremme bærekraftig

gjenbruk av materielle ressurser. For å returnere din brukte enhet må du bruke

retur- og innsamlingssystemene eller kontakte forhandleren der produktet ble kjøpt.

De kan sørge for at dette produktet blir resirkulert på en måte som ivaretar miljøet.

E. Bryter

F. Stikkontakt

G. Brakett

H. Driver

FORSIKTIG:

Lyskilden til lampen kan ikke skiftes ut,

hvis den blir ødelagt må lampen skiftes ut.

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

Instruktionsmanual

Läs användarinstruktionerna noggrant före användning.

• Spara dessa instruktioner för framtida bruk.

• Titta inte direkt in i arbetslampan när den är påslagen.

• Håll utom räckhåll för barn.

• Kan användas både inomhus och utomhus.

• Sänk inte ner i vatten eller annan vätska.

Tekniska parametrar

Typ: DT-826413 + DT-826420

Färgtemperatur 4200K

Nominell effekt: 45W (250X0,2W)

Matningsström: MAX. 0,2 1A

Effektfaktor: >0,9

Härdat glas: 347X194X2,3mm

Vikt: 2,3kg

Maximal projekterad yta: 0,07m2

Mått: 385X315X90mm

Anmärkning: Elchocksskyddsklass: I

Extern ljusskyddsklass: IP54

Storlek på lampsockel: LED

Märkspänning: 220-240V~ 50/60Hz

Typ: DT-826642

Färgtemperatur 4200K

Nominell effekt: LED: 24W

USB: 5W

Matningsström: MAX. 0,25 A

Effektfaktor: >0,9

Härdat glas: 254,6X146.5X20,6mm

Vikt: 1,2kg

Maximal projekterad yta: 0,07m2

Mått: 290X83X234mm

Anmärkning: Elchocksskyddsklass: I

Extern ljusskyddsklass: IP54

Storlek på lampsockel: LED

Märkspänning: 220-240V~ 50/60Hz

Säkerhetsinstruktioner

1. Slå alltid av strömmen före montering eller underhåll för att undvika elchock.

2. Lampan måste vara jordad.

3. Om den externa exibla kabeln eller sladden till armaturen är skadad, måste

den omedelbart bytas ut av tillverkaren, tillverkarens serviceverkstad eller

annan kvalicerad tekniker.

4. Strömmen måste vara avslagen innan något arbete utförs på apparaten.

Underhåll ska endast genomföras av en kvalicerad elektriker.

5. DT-826413 + DT-826642: Apparaten är utrustad med eluttag. Kontrollera att

den totala uteffekten är max 13A. DT-826420 är försedd med schukostickpropp

och max. total effekt är 16A.

6. Lampan får endast användas med hållaren utfälld.

Korrekt bortskaffande av denna produkt

Markeringen betyder att denna produkt inte får bortskaffas med andra hushållsavfall.

Gäller i hela EU. För att förhindra miljö- och personskador från okontrollerad

avfallshantering, bör produkten återvinnas på ett ansvarsfullt sätt för att främja hållbar

återanvändning av materiella resurser. För att returnera använd enhet, använd

returnerings- och uppsamlingssystemen eller kontakta återförsäljaren som du köpte

produkten av. De kan ta emot produkten för miljösäker återvinning.

A. Skärm

B. LED

C. Lamphus

D. Handtag

VARNING:

Lampans ljuskälla kan inte bytas,

om lampan går sönder skall

armaturen bortskaffas se nedan

text.

E. Strömbrytare

F. Uttag

G. Hållare

H. Drivenhet

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

LED LIGHT INSTRUCTIONS

Read the User Instructions carefully before use.

Save these instructions for future reference.

Do not look directly into the work lamp when it is switched on.

Keep out of the reach of children.

Can be used indoors and outdoors. Charge the lamp in dry, indoor location.

Do not immerse in water or any other liquid.

Specifications

Type Rated Power Supply

Current

Power

factor

Tempered

Glass

Weigh

Maximum

projected

area

Dimensions Remark:

Electric shock

protection class: I

External light

protection class:

IP54

Lamp socket size:

LED

Rated

voltage:220-240V~

50/60Hz

DT-8264

45W

（250*0.2W）

MAX.0.2

＞0.9 347*194*2.3

2.3kg 0.07M2385*315*90m

Safety instructions

1. Before mounting or maintenance, always switch off the electrical supply to avoid electric shock.

2. The lamp must be earthed.

3.The power cord must be H07RN-F 3x 1.5 mm² cable waterproof.

4.If the external flexible cable or cord of this luminaire is damaged, it must immediately be replaced by the

manufacturer, his service agent or a qualified technician.

5. Replace any cracked protective shield.

6.Before maintenance work takes place, the power must be switched off. The maintenance should be done

only by a qualified electrician.

7. The appliance is equipped with sockets. Make sure that the total output is less than 16A.

8.The lamp must only be used with the bracket extended.

A. Cover

B. LED

C. Body

D. Handle

E. Switch

F. Socket

G. Bracket

H. Driver

Käyttöohje

Lue käyttöohjeet huolellisesti ennen käyttöä.

• Säästä nämä ohjeet tulevaa tarvetta varten.

• Älä katso suoraan työvalaisimeen, kun se on päällä.

• Säilytä lasten ulottumattomissa.

• Sopii sisä- ja ulkokäyttöön.

• Älä upota veteen tai muuhun nesteeseen.

Tekniset tiedot

Tyyppi: DT-826413 + DT-826420

Värilämpötila: 4200K

Nimellisteho: 45 W (250 X 0,2 W)

Syöttövirta: MAX. 0,2 1A

Tehokerroin: >0,9

Temperoitu lasi: 347 X 194 X 2,3 mm

Paino: 2,3 kg

Suojattu alue enintään: 0,07 m2

Mitat: 385 X 315 X 90 mm

Huomautus: Sähköiskusuojauksen luokka: I

Kotelointiluokka: IP54

Lampun kannan koko: LED

Nimellisjännite: 220–240 V~ 50/60 Hz

Tyyppi: DT-826642

Värilämpötila: 4200K

Nimellisteho: LED: 24 W

USB: 5 W

Syöttövirta: MAX. 0,25 A

Tehokerroin: >0,9

Temperoitu lasi: 254,6 X 146,5 X 20,6 mm

Paino: 1,2 kg

Suojattu alue enintään: 0,07 m2

Mitat: 290 X 83 X 234 mm

Huomautus: Sähköiskusuojauksen luokka: I

Kotelointiluokka: IP54

Lampun kannan koko: LED

Nimellisjännite: 220–240 V~ 50/60 Hz

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Raptor Arbeitsleuchte Handbücher

Raptor

Raptor 9747983 Bedienungsanleitung

Beliebte Arbeitsleuchte Handbücher anderer Marken

ANSMANN

ANSMANN POWERLIGHT 5.1 Bedienungsanleitung

RTRMAX

RTRMAX RTX1868 Bedienungsanleitung

FeinTech

FeinTech LAL00220 Bedienungsanleitung

Bunker Hill Security

Bunker Hill Security 64735 Bedienungsanleitung

Goobay

Goobay 30450 Bedienungsanleitung

REV Ritter

REV Ritter SPOT Bedienungsanleitung

Ignition

Ignition Stagepix Line 100 IP Bedienungsanleitung

SCANGRIP

SCANGRIP DUO CONNECT Bedienungsanleitung

Bosch

Bosch GLI 18 V Bedienungsanleitung

Bayco

Bayco SL-1514 Bedienungsanleitung

EUFAB

EUFAB SMD LED 8+1 Bedienungsanleitung

DeWalt

DeWalt DCL510 Bedienungsanleitung

PowerSmith

PowerSmith PWLD080T Bedienungsanleitung

MaxLite

MaxLite 73683 Bedienungsanleitung

Heitronic

Heitronic Trend 27867 Bedienungsanleitung

Monzana

Monzana Gore MZCL10 Bedienungsanleitung

EINHELL

EINHELL TE-CL 18/2000 LiAC Bedienungsanleitung

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Bedienungsanleitung