Raritan T1700 Bedienungsanleitung

LCD KVM Console QSG 1

QSG-T1700_T1900-0B-v1.1-E y255-37-0016-00

Raritan LCD KVM Console®

(T1700/T1900)

Quick Installation and Setup Guide

Congratulations on your purchase of Raritan LCD KVM Console, one of the best-known LCD KVM drawers in the current

market. The Raritan LCD KVM Console solution is an integrated, 1U device that manages servers or KVM in data centers,

server rooms and other space critical environments - directly from the racks in which they are installed.

Package Content Structure Diagram

Raritan LCD KVM Console comes with the standard parts

shown in this section. Check and make sure they are included

and in good condition. If anything is missing, or damage,

contact the supplier immediately.

T1700

1. LCD KVM drawer x 1 pc

2. Fasteners for rear L-bracket x 4 pcs

3. Rear mounting L-bracket x 1 pair

*T1700 series mounting depth-adjustable from 395 to

880mm

4. Single or “one man” installation slides x 1 package

5. 3-in-1 KVM cable x 1 pc

6. Power cord x 1 pc

T1900

1. LCD KVM drawer x 1 pc

2. Fasteners for rear L-bracket x 4 pcs

3. Rear mounting L-bracket x 1 pair

*T1900 series mounting depth-adjustable from 315 to 880

4. Single or “one man” installation slides x 1 package

5. 3-in-1 KVM cable x 1 pc

6. Power cord x 1 pc

QS Rule

1. Carry handle to release the 2-pt lock

2. 2-point lock

3. LCD screen

4. LCD membrane

5. Adjustable rear mounting L-bracket

6. Micro switch for screen auto power off

7. Keyboard

8. Touchpad

QS Rule

Before Installation

•It is very important to locate the LCD KVM Console in a

suitable environment.

•The surface for placing and fixing the LCD KVM Console

should be stable and level or mounted into a suitable

cabinet.

•Make sure the place has good ventilation, is out of direct

sunlight, away from sources of excessive dust, dirt, heat,

water, moisture, and vibration.

•Convenience for connecting the LCD KVM Console to the

related facilities should be well considered too.

QS Rule

LCD KVM Console QSG 2

QSG-T1700_T1900-0B-v1.1-E y255-37-0016-00

Installation 3. Fixing the LCD KVM Console into the Rack

Rack-Mounting the LCD KVM Console

There are three major steps to rack-mount the LCD KVM

Console.

1. Install the rear L-bracket to the LCD KVM Console.

2. Align the rear L-brackets to a suitable length for the rack.

3. Fix the LCD KVM Console into the rack.

1. Installing the Rear L-bracket

a. Install each rear L-bracket using two fasteners shown in

the diagram.

b. Leave the fasteners slightly loose.

2. Aligning the Rear L-brackets

a. Measure the front and rear mounting depth of the rack.

b. Align each rear L-bracket to a suitable length and

tighten the fasteners shown in the diagram.

Fix the LCD KVM Console into the rack.

Note: Hardware (screws and cage nuts) for fixing the mounting

bracket into the rack is not provided.

How to Install "One Man" Installation Slides

Component list

1 Mounting bracket x 2 pcs

2 Front mounting ear (left & right) x 2 pcs

3 Support bracket x 4 pcs

4 M6 cage nut x 6 pcs

LCD KVM Console QSG 3

QSG-T1700_T1900-0B-v1.1-E y255-37-0016-00

Component list

5 M6 washer x 8 pcs

6 M6*15mm screw x 8 pcs

7 M3.2*4.5mm screw x 14 pcs

Installing the Front Mounting Ear x 2 pcs

1. Disassemble the standard front mounting ears carefully.

2. Install the optional front mounting ears with M3.2*4.5 mm

screw x 8 pcs.

Installing into Rack

•Attach the mounting bracket to vertical mounting rails.

•Adjust the rear mounting bracket to fit your rack.

•Repeat the above steps for the other side.

Caution: Leaving the screws slightly loose (not release).

•Attach support brackets to chassis with M3.2*4.5mm screw

x 3 pcs.

•Repeat the above step for the other side.

•Pick up the chassis.

•Insert inner members of slides into the already mounted

internal slide members in the rack.

•Push the white-arrow button on each slide that is installed

on the LCD keyboard drawer to unlock (Push at the same

time).

Caution: Be careful when pushing the chassis into the left

and right slides. Avoid pressing the red button located on

either side of the slide.

LCD KVM Console QSG 4

QSG-T1700_T1900-0B-v1.1-E y255-37-0016-00

Connecting to the KVM Switch via PS/2 Interface

This is an illustration of connecting the 3-in-1 KVM cable to the

KVM switch via PS/2 Interface.

•Hold down the white-arrow button and push the chassis to

the end.

•Attach left and right mounting ears to vertical mounting

rails.

•Tighten the screws on both sides.

•Installation completed.

1. 3-in-1 KVM cable

2. KVM switch

3. Keyboard port

4. Mouse port

5. VGA port

Caution: The LCD KVM Console is hot-pluggable, but

components of connected devices, such as the servers and

KVM switch, may not be hot-pluggable. Plugging and

unplugging cables while servers and KVM switches are

powered on may cause irreversible damage to the servers,

KVM switches and LCD KVM Console. Before attempting to

connect anything to the product, we suggest turning off the

power to all devices. Apply power to connected devices

again only after the LCD KVM Console is receiving power.

The company is not responsible for damages caused in this

way.

Connecting to the KVM Switch via USB Interface

1. 3-in-1 KVM cable

2. KVM switch

3. USB ports

4. VGA port

LCD KVM Console QSG 5

QSG-T1700_T1900-0B-v1.1-E y255-37-0016-00

Connecting to the Server via PS/2 Interface

This is an illustration of connecting the 3-in-1 KVM cable to a

server via PS/2 interface.

1. 3-in-1 KVM cable

2. Server

3. Keyboard port

4. Mouse port

5. VGA port

Connecting to the Server via USB Interface

1. 3-in-1 KVM cable

2. Server

3. USB port

4. VGA port

QS Rule

More Information

1. LCD KVM Console cannot be installed on a 2-post rack, but

can be installed on a 4-post rack as well as an enclosed

rack.

2. For more information about how to operate LCD KVM

Console and its onscreen display, see LCD KVM Console

User Guide for complete description. LCD KVM Console

User Guide is available for download at:

http://www.raritan.com/support/firmware-and-docume

ntation/

(http://www.raritan.com/support/firmware-and-documentati

on/)

Andere Handbücher für T1700

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Raritan LCD-Schublade Handbücher

Raritan

Raritan T1700-LED Bedienungsanleitung

Raritan

Raritan T1500 Bedienungsanleitung

Raritan

Raritan P2-USTIP1 Bedienungsanleitung

Raritan

Raritan T1700-LED Bedienungsanleitung

Raritan

Raritan T1900 Bedienungsanleitung

Raritan

Raritan T1700 Bedienungsanleitung

Raritan

Raritan IP-Reach IPR-M1 Bedienungsanleitung

Raritan

Raritan TZ1500 Bedienungsanleitung

Beliebte LCD-Schublade Handbücher anderer Marken

Acnodes

Acnodes KD 8228 Bedienungsanleitung

Ameriwood

Ameriwood 9524328PCOM Bedienungsanleitung

Kesseböhmer

Kesseböhmer TANDEM solo Bedienungsanleitung

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Bedienungsanleitung

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Bedienungsanleitung

NTI

NTI RACKMUX-V17-N Bedienungsanleitung

Austin Hughes

Austin Hughes CyberView L120 Bedienungsanleitung

Uplift Desk

Uplift Desk STR018 Bedienungsanleitung

Acnodes

Acnodes KDC 81932 Bedienungsanleitung

Acnodes

Acnodes RK1200T Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1501 Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

GRASS

GRASS DWD XP Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1701 Bedienungsanleitung

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Bedienungsanleitung

Fujitsu

Fujitsu RC25 Bedienungsanleitung

Acnodes

Acnodes RK 1000B Bedienungsanleitung