Rasilient PixelStor 300e Montageanleitung

PixelStor 300e

MegaPixel Storage

SAS Expansion Enclosure

Hardware Installation Manual

1st Edition

May 2013

All rights, including copyright, in the content of this manual are owned or controlled by

RASILIENT and protected by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without the prior written consent of RASILIENT

Systems, Inc.

Trademarks

All product names or brands mentioned herein are the trademarks of RASILIENT, its

subsidiaries or other respective owners.

Disclaimer

This manual provides information regarding set-up and installation of the product herein.

Nothing herein may be construed as granting any right or license relating to any intellectual

property rights of this manual or product. Unless otherwise provided in the Purchase and Sale

Agreement for this product, manufacturer and distributor of this product will not be liable

whatsoever relating to the distribution and/or use of this product. In addition, manufacturer and

distributor of this product hereby specifically disclaim any express or implied warranties of

merchantability, fitness for a particular purpose, or non-infringement of third party rights in

connection with this product.

Manufacturer of this product has the right to change specifications and product descriptions at

any time without notice.

Contents

About This Manual................................................................................................................................ i

Conventions..........................................................................................................................................i

Safety Symbols....................................................................................................................................ii

Safety Precautions..............................................................................................................................iii

Regulatory and Integration Information...............................................................................................v

Regulatory Compliance Identification Numbers..............................................................................v

Product Regulatory Compliance......................................................................................................v

Power Cords .................................................................................................................................viii

1Introduction................................................................................................................................1-1

1.1 Audience Assumptions .........................................................................................................1-1

1.2 About this Guide...................................................................................................................1-1

1.3 Packing Checklist .................................................................................................................1-1

1.4 Specifications........................................................................................................................1-3

1.5 Product Features..................................................................................................................1-3

1.6 System Overview..................................................................................................................1-5

1.6.1 Chassis Layout..............................................................................................................1-6

1.6.2 Front View......................................................................................................................1-6

1.6.3 Back View......................................................................................................................1-8

1.6.4 System LED Information ...............................................................................................1-8

2Hardware Installation.................................................................................................................2-1

2.1 SAS IO Modules...................................................................................................................2-1

2.2 Power Supply Modules.........................................................................................................2-4

2.3 SATA II Drive Modules..........................................................................................................2-7

2.4 Mid-Plane............................................................................................................................2-12

2.5 Mounting the System onto a Rack .....................................................................................2-14

2.6 PS300e SAS Connections..................................................................................................2-15

List of Figures

Figure 1-1 PS300e –Front ViewTable 1-4 Product Features................................................1-4

Figure 1-2 Chassis Layout........................................................................................................1-6

Figure 1-3 Front Panel ..............................................................................................................1-7

Figure 1-4 Back View Hot-plug Modules...................................................................................1-8

Figure 1-5 Back View Connectors.............................................................................................1-8

Figure 1-6 Back View LED........................................................................................................1-9

Figure 2-1 SAS IO Module Front Panel....................................................................................2-1

Figure 2-2 SAS IO Module Location.........................................................................................2-2

Figure 2-3 Release the SAS IO Module....................................................................................2-3

Figure 2-4 Securing the SAS IO Module...................................................................................2-3

Figure 2-5 Power Supply Module Location...............................................................................2-4

Figure 2-6 Pressing the Power Switch......................................................................................2-5

Figure 2-7 Unplugging the Power Cords...................................................................................2-5

Figure 2-8 Releasing the Power Supply Module ......................................................................2-6

Figure 2-9 Installing the Power Supply Module........................................................................2-6

Figure 2-10 Drive Module Location...........................................................................................2-7

Figure 2-11 Hard Disk Module ..................................................................................................2-7

Figure 2-14 HDDAssembly installed in Chassis.......................................................................2-8

Figure 2-17 Mid-Plane Location..............................................................................................2-12

Figure 2-18 Removing the Mid-plane......................................................................................2-12

Figure 2-19 Installing the Mid-plane........................................................................................2-13

Figure 2-20 Installing the Mounting Brackets in the Rack ......................................................2-14

Figure 2-21 Secure the Mounting Brackets ............................................................................2-15

Figure 2-22 SAS Connectors..................................................................................................2-16

Figure i China RoHS Regulations............................................................................................i

List of Tables

Table i Product Safety Requirements............................................................................................v

Table ii European Union Safety Requirements............................................................................vi

Table 1-1 Introduction of the Manual.........................................................................................1-1

Table 1-2 Packing Checklist......................................................................................................1-1

Table 1-3 Specifications.............................................................................................................1-3

Figure 1-1 PS300e –Front ViewTable 1-4 Product Features................................................1-4

Table 1-5 LED Information.........................................................................................................1-9

About This Manual

Conventions

Safety Symbols

Safety Precautions

Regulatory and Integration Information

About This Manual

PixelStor 300e User Manual

Rev. 1, May 2012

About This Manual

Conventions

To make sure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

Warning:

Provides Information to prevent injury in the process of completing a

task.

Caution:

Provides Information to prevent damage to the components in the

process of completing a task.

Important:

Provides Information required for completing a task.

Note:

Provides Tips to aid in completing a task.

About This Manual

PixelStor 300e User Manual

Rev. 1, May 2012

Safety Symbols

The following symbols are placed on some components of the system to alert the user to

potential hazards,

WARNING: Electric Shock Hazard –To reduce risk of injury from electric

shock hazards, do not open this component.

WARNING: Contains No User or Field Serviceable Parts –To reduce the

risk of injury from electric shock hazards, do not open this component.

WARNING: Hot Surface or Component - To reduce risk of injury from a hot

component; allow the surface to cool before touching.

WARNING: Insert Network Interface Only - Any receptacle (e.g. RJ45)

marked with this symbol indicates a network interface connection. To reduce

the risk of electric shock, fire or damage to equipment, do not plug telephone

or telecommunications connectors into this receptacle

WARNING: This symbol, on power supplies or systems, indicates that the

equipment is supplied by multiple sources of power. To reduce the risk of injury

from electric shock, remove all power cords to completely power down the

system.

Weight in kg

Weight in lb

WARNING: This symbol indicates that the component exceeds the

recommended weight for one individual to handle safely. To reduce the risk

of personal injury or damage to the equipment, observe local occupational

health and safety requirements and guidelines for manual material handling.

About This Manual

PixelStor 300e User Manual

Rev. 1, May 2012

iii

Safety Precautions

Technician Notes

Only authorized technicians should attempt to repair this equipment.

Before installing this system, carefully read all the manuals included with the system.

All repair procedures allow only module replacement. Because of the complexity of the

individual boards and sub-assemblies, no one should attempt to make repairs at the

component level or make modifications to any printed wiring board. Improper repairs can

create a safety hazard.

To reduce the risk of personal injury from electric shock and hazardous energy levels, do

not exceed the level of repairs specified in these procedures.

The system is designed to be electrically grounded. To ensure proper operation, plug the

AC power cord into a properly grounded AC outlet only.

Electrostatic Discharge Precautions

Electrostatic discharge (ESD) can damage static sensitive devices or micro circuitry. Proper

packaging and grounding techniques are required to prevent damage.

Keep electrostatic-sensitive parts in their containers until they arrive at a static free work

area.

Use a wrist strap connected to the work surface as well as properly grounded tools and

equipment

Keep the area free of nonconductive materials such as ordinary plastic tools and foam

packing.

Avoid touching pins, leads, or circuitry.

Always place drives with printed circuit board (PCB) assembly-side down.

Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the solder

joints or pins.

If you need to lay the device down while it is out of the antistatic bag, lay it on the antistatic

bag. Before picking it up again, touch the antistatic bag and the metal frame of the system

unit at the same time.

Rack Warnings

If you plan to rack mount the PixelStor 300e, please follow the rack manufacturer’s safety

instructions.

Install the enclosure only in a rack that has been properly secured in an area with suitable

environmental conditions.

About This Manual

PixelStor 300e User Manual

Rev. 1, May 2012

Have someone assist you during physical installation.

To properly ventilate the system, you must provide at least 7.6 cm of clearance at the front

and back of the system.

To reduce the risk of personal injury or damage to equipment, always ensure that the rack is

adequately stabilized prior to extending a component outside the rack. A rack may become

unstable if more than one component is extended. Extend only one at a time.

Do not stand or step on any components in the rack.

If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the

rack environment may be greater than room ambient. Therefore, consideration should be

given to installing the equipment in an environment compatible with the maximum ambient

temperature (Tma) specified by the manufacturer.

Do not overload the AC power supply branch circuit that provides power to the rack.

Observe extension cable and power strip ratings. Ensure that the total ampere rating of all

equipment plugged into the extension cable or power strip does not exceed 80 percent of

the ampere ratings limit for the extension cable or power strip.

System Warnings

Avoid dust, humidity, and extreme temperatures; place the system on a stable surface.

To reduce the risk of personal injury from hot surfaces, allow the hot-plug disk modules and

other system modules to cool before touching them.

To reduce the risk of electric shock or damage to the equipment, do not disable the power

cord grounding plug. The grounding plug is an important safety feature.

Ensure the power cord is inserted into a grounded electrical outlet that is easily accessible

at all times. Unplug the power cord from the power supply module to shut off power to the

equipment

Protect the storage system from power fluctuations and temporary power interruptions with

a regulating uninterruptible power supply (UPS). This device protects the hardware from

damage caused by power surges and voltage spikes and keeps the system operational

during a power failure.

The storage system must always be operated with all hot plug modules installed or slot

covers in place to ensure proper cooling.

Route power cords so that they will not be walked on or pinched by items placed upon or

against them. Pay particular attention to the plug, electrical outlet, and the point where the

cords exit from the product.

Inhaltsverzeichnis

Andere Rasilient Lagerung Handbücher

Rasilient

Rasilient PixelStor 5000 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung