Rauch Quantron e Bedienungsanleitung

5900660-e-en-0909

QUANTRON-E

OPERATOR MANUAL

Please read carefully

before using the machine!

Store carefully for future

use!

This Operator Manual should be consi-

dered as part of the machine. Suppliers

of new and second-hand machines are

obliged to indicate in writing that the

Operator Manual has been delivered

with the machine.

Translation of the original

operating manual

Preface

Dear customer

Your purchase of the control unit Quantron E for the AXIS fertiliser spreader indicates your confi-

dence in our products. Thank you! We want to justify your trust. You have purchased a powerful

and reliable control unit.control unit However, if any problems occur: Our Customer Service is al-

ways ready to help.

Please read this operator's manual and the operator's manual for the fertiliser spreader ca-

refully before operating the control unit and follow all instructions.

This manual may also contain descriptions of equipment and options that are not included with

the feature package of your control unit.control unit

You should be aware that damage caused by incorrect operation or improper use may not be co-

vered by warranty claims.

Technical improvements

We are continuously improving our products. For this reason we reserve the right to make

any improvements and changes to our machine that we consider necessary without notice.

We do not accept any obligation to make such improvements or changes on machines that

have already been sold.

We will be pleased to answer any other questions that you might have.

Yours sincerely

RAUCH

Landmaschinenfabrik GmbH

CAUTION

Note the serial number of the control unit and machine number!

The control unit Quantron E is calibrated at the factory for the fertiliser spreader

with which it was delivered. It cannot be connected to another fertiliser sprea-

der without requiring recalibration.

Please record the serial number of the control unit and the machine number of

the fertiliser spreader. These numbers must be checked when connecting the

control unit to the fertiliser spreader.

Serial numbercontrol unit Machine number of fertiliser spreader Year of manufacture:

Table of Contents

Preface

Technical improvements

1 User instructions 3

1.1 About this operator manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Information on layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2.1 Meaning of safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2.2 Instructions and procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2.3 Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Layout and function 7

2.1 Overview of the AXIS versions supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Layout of the control unit - Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.3 Controls, keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.4 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.5 Structural overview of menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3 Attachment and installation 13

3.1 Requirements for the tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2 Connections, sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2.1 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2.2 7-pin plug connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.3 Connecting the control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.4 Preparation of metering slide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4 Operation Quantron E 21

4.1 Switching on the control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.2 Weighing - Tripcounter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.2.1 Trip counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.2.2 Remaining fertiliser volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.2.3 Weigh quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.2.4 Machine tare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.3 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.4 Fertiliser settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4.4.1 Application rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.4.2 Working width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4.4.3 Flow factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.4.4 Calibration test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.4.5 Drop point (L+R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4.4.6 Fertiliser chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

4.5 Hopper configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

4.5.1 Speed calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

4.5.2 AUTO / MAN mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.5.3 +/- appl. rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

4.5.4 Curve correction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

4.6 Fast emptying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Table of Contents

4.7 Field data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

4.7.1 Select field file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

4.7.2 Creating a new field file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

4.7.3 Starting recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

4.7.4 Stopping recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

4.7.5 Importing and exporting operating data . . . . . . . . . . . . . . . . . . . . . . . . . .65

4.8 System / Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

4.8.1 Setting language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

4.8.2 Display config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

4.8.3 Test / Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

4.8.4 Data transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

4.8.5 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

4.9 Special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

4.9.1 Text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

4.9.2 Input of values using the cursor keys . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

5 Alarm messages and possible causes 77

5.1 Meaning of alarm messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

5.2 Clear fault / alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

5.2.1 Acknowledging alarm message: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

5.2.2 Resolving problems with the flow factor regulation (only AXIS W): . . . . .79

6 Special equipment/options 81

7 Guarantee and warranty 83

User instructions

1 User instructions

1.1 About this operator manual

This operator manual is a component of the control unit Quantron E.

The operator manual contains important instructions for the safe, correct and

economical operation and maintenance of the control unit. Your attention will

help to prevent dangers, reduce repair costs and downtime and will increase

the reliability and service life of the machine.

The operator manual is a component of the machine. All documentation must be

kept within reach at the place of operation of the control unit (e. g. in the tractor).

The operator manual is not intended to replace your own personal responsibil-

ity as the owner and operator of the control units Quantron E.

Brief instructions are supplied with the control unit Quantron E. If these are not

included in the scope of supply please contact us.

1.2 Information on layout

1.2.1 Meaning of safety precautions

In the operator manual, the safety precautions are classified according to how se-

rious the danger is and the probability of its occurrence.

The warning symbols draw attention to the unavoidable residual risks inherent in

the design to which users of the control unit are exposed. The safety instructions

used are structured as follows:

Example

Signal word

Symbol Explanation

n DANGER

Description of sources of danger

Description of the danger and possible consequences.

Ignoring this warning will result in very serious injury or death.

Measures to prevent this danger.

User instructions1

Danger levels in the safety precautions

The danger level is identified by the signal word. The danger levels are classified

as follows:

n DANGER

Type and source of the danger

This note warns of a danger posing an immediate threat to the

health and life of people.

Ignoring this warning will result in very serious injury or death.

Always observe the measures described to prevent this

danger.

n WARNING

Type of danger

This note warns of a potentially dangerous situation for personal

health.

Ignoring this warning will result in serious injury.

Always observe the measures described to prevent this

danger.

n CAUTION

Type of danger

This note warns of a potentially dangerous situation for personal

health or of material and environmental damage.

Failure to observe this warning will result in damage to the product

or the surroundings.

Always observe the measures described to prevent this

danger.

NOTICE

General instructions include tips for usage and useful information but not

warnings of dangers.

User instructions

1.2.2 Instructions and procedures

Steps that the operator must carry out are shown as a numbered list.

1. Instruction for action step 1

2. Instruction for action step 2

Instructions that only have one step are not numbered. The same applies for ac-

tion steps that do not have a specific sequence.

A bullet is placed in front on these instructions:

Handling instructions.

1.2.3 Lists

Lists without a specific sequence are shown as lists with bullet points (level 1) and

dashes (level 2):

Property A

- PointA

- PointB

Property B

User instructions1

Layout and function

2 Layout and function

2.1 Overview of the AXIS versions supported

Function/Options AXIS Q AXIS W

Ground speed dependent

spreading

AXIS 20.1 Q

AXIS 30.1 Q

AXIS 40.1 Q

Weighing spreader AXIS 30.1 W

AXIS 40.1 W

AXIS 50.1 W

Electrical adjustment of

drop point AXIS 50.1 W

Layout and function2

2.2 Layout of the control unit - Overview

Figure 2.1: Control unit Quantron E

No. Designation Function

1 Control panel Keys for operation of the unit and the display for ope-

rating screens.

2 V24 data port Serial interface (RS232) with LH 5000 and

ASD protocol, designed for connection of an RS232

Y- cable for connecting to a remote terminal.

3 8-pin plug connec-

tor

Plug connection (DIN 9684-1/ISO 11786) for con-

necting the 7-way to 8-way cable for the speed sen-

sor.

4 Machine cable plug

connector

39-pin plug connector for connecting the machine

cable to the positioning cylinder.

5 Power supply 3-pin plug connector conforming to DIN 9680 /

ISO 12369 for connecting the power supply.

6 Bracket Attachment for securing the control unit to the trac-

tor.

Inhaltsverzeichnis

Andere Rauch Controller Handbücher

Rauch

Rauch FS4 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

Rauch quantron e Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken