Rayleigh Instruments RI-ENERGY 3.0D Bedienungsanleitung

RI-ENERGYFLOW-MIDI Series

MIDI Inverters

3.0D | 3.6D | 4.0D | 4.6D

| 5.0D |6.0D

User Manual

Rayleigh Instruments Limited (Head Office)

RaytelHouse,CutlersRoad,SouthWoodhamFerrers,Chelmsford,EssexCM35WA.UK.

E: [email protected]

Rayleigh Instruments Limited SP. Z o.o. (European Office).

Ul. Aleje Jerozolimskie 214, Warsaw, Poland, 02-486.

E: [email protected]

www.Rayleigh.com www.Rayleigh.pl


 
Contents 
Introduction………………………………………………………………………………………………………….. 4
1 Product description…………………………………………………………………………………………….. 4
2Packing……………………………………………………………………………………………………………4
3 Optional Packing……………………………………………………………………………………………….. 5
Safety instructions………………………………………………………………………………………………….. 5
1 Applied designations…………………………………………………………………………………………… 6
2 Notice for use…………………………………………………………………………………………………… 6
3 Important Safety Information………………………………………………………………………………….. 7
4 System sizing…………………………………………………………………………………………………… 7
Overview…………………………………………………………………………………………………………….. 8
1 Front Panel Display…………………………………………………………………………………………….. 8
2 LED Status Indicator Light…………………………………………………………………………………….. 8
3 Keypad (Optional)……………………………………………………………………………………………… 8
4 LCD (Optional)……………………………………………………………………………………………...….. 9
Installation…………………………………………………………………………………………………………… 9
1 Select a Location for the Inverter………………………………………………………………………………9
2 Mounting the Inverter……………………………………………………………………………………….... 10 
3 Electrical Connections……………………………………………………………………………………..…. 11 
Start&Stop…………………………………………………………………………………………………….…….19 
1 Start the Inverter………………………………………………………………………………………..………19 
2 Stop the Inverter……………………………………………………………………………………..…………19 
Operation………………………………………………………………………………………………..…………..19 
1 Setup-Technicians Only…………………………………………………………………………..………….. 20 
2 INQUIRE…………………………………………………………………………………………..…………… 21 
3 Statistics………………………………………………………………………………………….……………. 22 
Maintenance……………………………………………………………………………………….……………… 22 
Troubleshooting………………………………………………………………………………….……………….. 22 
Specifications………………………………………………………………………………….………………….. 24 
Quality Assurance………………………………………………………………………….…………………… 25 
 
 
 

1. Introduction

1.1 Product description

This manual describes solar inverters:

RI-ENERGYFLOW-MIDI-3.0D /3.6D /4.0D /4.6D /5.0D /6.0D.

Figure 1.1 Front and side view

Figure 1.2 Bottom side view

Object

Description

DVC class

PV1, PV2

DVC C

AC OUTPUT

DVC C

DRM

DVC A

COM

DVC A

1.2 Packing

When you receive the inverter, ensure that all the parts listed below are included:

Part

Description

Number

PV grid tie inverter

Wall/pole bracket

Locking screws

DC connector

2pairsfor RI-ENERGYFLOW-

MIDI

AC connector

Manual

OT terminal

Explpsion-proof screws

1.3 Optional Packing

Part

Description

Number

DRM connector

CT connector

WiFi/GPRS Stick

1xCT and com cable

2. Safety instructions:

Please read the safety instructions in this manual. Throughout the manual it is assumed that the reader is

familiar with AC and DC installations and knows the rules and regulations for electrical equipment and for

connecting it to the utility AC grid. It is especially important to be familiar with the general safety rules for

working with electrical equipment.

2.1 Applied designations

Throughout the manual important information is shown at different levels depending on the character of the

information, as shown here:

Safety information important for human safety. Violation of warnings may result in injury

to persons or death.

Danger of high voltage and electric shock!

Signals danger due to electrical shock and indicates the time (5 minutes) to allow after

the inverter has been turned off and disconnected to ensure safety in any installation

operation.

Danger of hot surface!

Product should not be disposed as normal household waste.

Conformity with the applicable requirements for products sold within Europe.

Conformity with the applicable requirements for products sold within Great Britain.

Information important for the protection of property. Violation of this type of information

may cause damage and loss of property.

RoHS

Useful additional information or “Tips and Tricks" on specific subjects.

ROHS Mark.

2.2 Notice for use

The inverter has been constructed according to the applicable safety and technical guidelines.

Use the inverter in installations that meet the following specifications ONLY:

1.Permanent installation is required.

2.The electrical installation must meet all the applicable regulations and standards.

3.The inverter must be installed according to the instructions stated in this manual.

4.The inverter must be installed according to the correct technical specifications.

5.To startup the inverter, the Grid Supply Main Switch (AC) must be switched on, before the solar panel's DC

isolator shall be switched on. To stop the inverter, the Grid Supply Main Switch (AC) must be switched off

before the solar panel's DC isolator shall be switched off.

2.3 Important Safety Information

Read this before installing, operating or maintaining the inverter.

Before installation:

Check for damage to inverter and packaging. If you are in doubt, please contact your

supplier beforeinstalling the inverter.Check the voltages of the solar modulesand make

sure they are within the limits of the inverter specifications before connecting them to the

inverter.

Installation:

Only trained and authorized personnel familiar with local electrical codes may install the

inverter. For optimum safety, please follow the steps described in this manual. Keep in

mind that the inverter has two voltage carrying sides, the PV input and the AC grid.

Disconnecting the inverter:

Always disconnect the AC line first! Afterwards disconnect the PV lines. Note that the

inverter can still be charged with very high voltages at hazardous levels even when it is

disconnected from grid and solar modules. Wait at least 5 min. before proceeding, after

having disconnected from grid and PV panels.

Operating the inverter:

Before connecting the AC grid to the inverter, make sure that the installation cover is

mounted again. The inverter must not be open during operation.

Maintenance and modification:

Only authorized personnel are allowed to repair or modify the inverter. To ensure

optimum safety for user and environment, only the original spare parts available from

your supplier should be used.

Functional safety parameters:

Unauthorized changes of functional safety parameters may cause injury or accidents to

people or inverter. Additionally it will lead to the cancelling of all inverter operating

approval certificates.

2.4 System sizing

When dimensioning a photovoltaic system, it must be ensured that the open-circuit

voltage of the PV string never exceeds the maximum permissible input voltage. For

3.0D, 3.6D, 4.0D, 4.6D, 5.0D and 6.0D series inverters, the maximum input voltage

is 600V DC. Higher voltages may result in permanent damage to the inverter.

The selection of PV string output should be based on the optimum utilization of the invested capital compared

to the expected annual energy yield from the system. This optimization depends on local weather conditions

and should be considered in each individual case.

The inverter incorporates an input power limiting device, which automatically keeps the power at levels that are

safe for the inverter. The limitation depends mainly on internal and ambient temperatures. The limitation is

calculated continuously and always allows the maximum possible amount of energy to be produced.

Please use the tool supplied by Rayleigh Instruments when dimensioning a photovoltaic system.

3. Overview

3.1 Front Panel Display

LCD display is Optional

Figure 3.1 Front Panel Display

3.2 LED Status Indicator Light

The LED status indicator can display red and green. When the indicator light is on, it indicates that there is

power. When the indicator light is red, it indicates the alarm state; when the indicator light is green, it indicates

the operation state.

Light

Status

Description

Alarm or fault condition is

detected.

The inverter is operating

properly.

Flashing

Grid Connected countdown

Table 3.1 Status Indicator Light

3.3 Keypad (Optional)

There are four keys in the front panel of the Inverter from left to right: ESC,UP, DOWN and ENTER keys. The

keypad is used for:

• Scrolling through the displayed options (the UP and DOWN keys);

• Access to modify the adjustable settings (the ESC and ENTER keys).

3.4 LCD (Optional)

The four-line Liquid Crystal Display (LCD) is located on the front panel of the Inverter, which shows the following

information:

• Inverter operation status and data;

• Service messages for operator;

• Alarm messages and fault indications.

You can also get information via WiFi / GPRS.

4. Installation

4.1 Select a Location for the Inverter

To selects location for the inverter, the following criteria should be considered:

• Do not install in small closed spaces where air can not circulate freely. To avoid overheating, always make

sure the flow of air around the inverter is not blocked.

• Exposure to direct sunlight will increase the operational temperature of the inverter and may cause output

power limiting. Rayleigh Instruments recommends inverter installed to avoid direct sunlight or raining.

• To avoid overheating ambient air temperature must be considered when choosing the inverter installation

location. Rayleigh Instruments recommends using a sunshade to minimise direct sunlight when the ambient air

temperature around the unit exceeds 104°F/40°C.

Figure 4.1 Recommended Installation locations

• Install on a wall or strong structure capable of bearing the weight.

• Install vertically with a maximum incline of +/-5° . If the mounted inverter is tilted to an angle greater than

the maximum noted, heat dissipation can be inhibited, and may result in less than expected output power.

• When 1 or more inverters are installed in one location, a minimum 300mm clearance should be kept

between each inverter or other object. The bottom of the inverter should be 500mm clearance to the ground.

Figure 4.2 Inverter Mounting clearance

• Visibility of the LED status indicator lights and the LCD located at the front panel of the inverter should be

considered.

• Adequate ventilation must be provided if the inverter is to be installed in a confined space.

Nothing should be stored on or placed against the inverter.

4.2 Mounting the Inverter

Dimensions of wall bracket:

Figure 4.3 Inverter wall mounting

Please see Figure 4.4 and Figure 4.5 for instructions on mounting the inverter.

The inverter shall be mounted vertically. The steps to mount the inverter are listed below:

1. According to figure 4.2, select the mounting height of the bracket and mark the mounting holes. For brick

walls, the position of the holes should be suitable for the expansion bolts.

Figure 4.4 Inverter wall mounting

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rayleigh Instruments Wechselrichter Handbücher

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYFLOW-MODULAR Series Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYFLOW-3P-MODULAR... Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYFLOW-3P-15 Series Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYFLOW 3P Series Bedienungsanleitung

Rayleigh Instruments

Rayleigh Instruments RI-ENERGYFLOW-MODULAR Series Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung