RCA MR53R400 Bedienungsanleitung

Television

User’s Guide

Changing Entertainment. Again.

Please read this manual before

operating this product for the

first time.

TOCOM 16066640

Model: MR53R400

Instruction Manual

WARNING

To reduce the risk of fire or electric

shock, do not expose this product

to rain or moisture. RISK OF ELECTRIC SHOCK. DO

NOT OPEN.

CAUTION Caution: To reduce the risk of

electric shock, do not remove

cover (or back). No user

serviceable parts inside. Refer

servicing to qualified service

personnel.

This symbol indicates

“dangerous voltage”

inside the product that

presents a risk of electric

shock or personal injury.

This symbol indicates

important instructions

accompanying the

product.

Caution: To prevent electric shock, match wide blade of

plug to wide slot, fully insert.

Refer to the identification/rating label located on the back

panel of your product for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user’s authority to operate it.

Caution: Using video games or any external accessory with

fixed images for extended periods of time can cause them to

be permanently imprinted on the picture tube (or projection

TV picture tubes). ALSO, some network/program logos, phone

numbers, etc. may cause similar damage. This damage is not

covered by your warranty.

Cable TV Installer: This reminder is provided to call your attention to

Article 820-40 of the National Electrical Code (Section 54 of the Canadian

Electrical Code, Part 1) which provides guidelines for proper grounding

and, in particular, specifies that the cable ground shall be connected to

the grounding system of the building as close to the point of cable entry

as practical.

NOM Requirements- Power Consumption: 110- 130V AC 60Hz 90W

MR53R400

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT STAND AND BASE SAFETY INFORMATION

Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to

prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or

damage the TV. Refer to the Important Safety Instructions above.

MR53R400

Feature Descriptions

181 Channel Tuner - total number of channels the TV can receive: 2-69 in Air mode, or 1-125 in Cable mode

Channel Recall - returns to the last channel viewed

Closed Caption Display - feature that displays the text of a TV broadcast

Remote Control - the remote control can execute all functions of the TV

On/Off Timer - feature that allows the user to set a time for the TV to turn on or off

Parental Control - used to lock unacceptable programming

Screen Size - the diagonal size of the TV screen in inches

Selectable Picture Modes - preset standards for TV display: Normal, Theater, and Memory

Trilingual On Screen Display (OSD) - TV’s on screen display can be either English, French, or Spanish

BEFORE YOU BEGIN

Feature MR53R400

181 Channel Tuner 1

Channel Recall 1

Closed Caption 1

Remote Control 1

On/Off Timer 1

Parental Control 1

Screen Size 21”

Picture Modes 1

Trilingual OSD 1

Front panel

Back panel

Front and Back Panels

MENU CH TV/AV

POWER LED

TV/VIDEO SELECT

VOLUME DOWN/UP

CHANNEL DOWN/UP

MENU SELECT

INFRARED SENSOR

MAIN POWER SWITCH

Instruction Manual

Panel Descriptions

AV Input - standard composite input designed for use with A/V devices, such as a VCR or DVD

player

AV Output - composite output for signals from TV to devices such as VCRs

Antenna IN Jack - standard coaxial antenna jack

TV (back panel)

VIDEO

OUT

AUDIO

VIDEO

RECALL

SCAN MUTE

123

456

789

100+

MR53R400

Remote Control Features

FUNCTION Used for

volume control and

child lock (press MUTE

at same time to lock

buttons. Use same

process to unlock)

100+ Used for channels

over 99

TIME Accesses the

Timer menu

SCAN The TV will scan

all active channels

PICTURE Selects the

various Picture Modes

RECALL Returns to the

last channel viewed

CH + / - Used to adjust

the current channel

STANDBY Turns the TV

On or Off

Number buttons Selects

channel by number

VOL + / - Used to adjust

the volume up or down

DISPLAY Brings up the

TV display

MENU Accesses the

TV menus

MUTE Mutes or restores

the TV volume

VIDEO Cycles through

the Video/Air modes

CC Activates Closed

Captioning

ARROWS Used to

navigate through TV

menus

Instruction Manual

INSTALLATION

- Please read the safety instructions in this manual completely before installation.

- Install your TV in an area where direct sunlight will not fall upon the screen.

- Soft, indirect light is best for television viewing.

- Allow enough space (at least 10 cm.) between the TV and any walls or enclosures for proper ventilation.

- The optimum television viewing distance is 5-7 times the screen’s vertical length.

Auto-Degaussing

Color television can be easily affected by magnetism, which shows as color distortion on the screen. If your TV is affected by

nearby magnetic components or appliances, press the MAIN POWER SWITCH on the front of the TV to power off your TV for at

least 1 hour. The built-in auto-degaussing circuit will eliminate the magnetic interference.

75-ohm coaxial cable (not supplied)

300-ohm twin-lead cable (not supplied)

Antenna

adapter

(not supplied)

U/V mixer

(not supplied)

Notes:

• It is recommended that a 75 ohm coaxial cable be used in order to

eliminate interference and noise which may occur due to nearby radio

transmissions.

• The antenna cable should not be tied together with other wiring.

• Set up a lightning rod and check it regularly when an outdoor

antenna is used.

1. Remove the battery compartment lid.

2. Insert two AAA batteries (included.) Make sure the positive (+) and

negative (-) polarities are correctly aligned.

3. Reattach the battery lid.

Notes:

• Alkaline batteries are recommended for longer life.

• Always replace both batteries at the same time.

• Do not expose batteries to fire or break them open.

• To avoid battery leakage, remove batteries from the remote control

when it is not to be used for a long period of time or the batteries

are exhausted.

VHF

UHF

Connecting the Antenna

Installing the Remote Control Batteries

RF Input

(back of TV unit)

VHF

UHF

or Cable

MR53R400

INSTALLATION (continued)

The following are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD player,

to your TV set. Please refer to operation manuals of external audio/video equipment that will be connected to

your set for additional instructions. PLEASE TURN ALL POWER OFF BEFORE CONNECTING DEVICES TOGETHER.

Connect VCR’s RF OUT terminal to the ANTENNA IN jack

located on the back panel of the TV.

Coaxial Cable

VCR with Modulator

AUDIO/VIDEO OUT

DVD Player

Camcorder

VCR

AUDIO/VIDEO IN

VCR

VIDEO Yellow

White

Yellow

White

Yellow

White

ANTENNA IN

Output from TV to Device

Input from Device to TV

VIDEO

AUDIO

VIDEO

OUT

AUDIO

White

Yellow

To Connect External Equipment

AUDIO

Instruction Manual

FUNCTIONS & FEATURES

Power On/Off

1. Power On

Plug in the power cord, and press the MAIN POWER SWITCH on the front of the TV to turn the power on.

2. Standby (Soft Off)

With the main power ON, press the Standby button on the remote control. This will put the TV in “Standby” or “soft off”

mode. The red indicator light on the TV set will NOT turn off. To turn the TV on again, simply press the Standby key on

the remote control, or press one of the CH +/ - keys on the TV set.

3. Power Off

With the power ON or in Standby mode, press the MAIN POWER SWITCH on the front of the TV set to completely turn off

the power to the TV set. The red indicator light on the front of the TV set will turn off. When turned back on, all settings

are reset. If previously set, the time must be re-entered.

4. Auto Off

If the TV is ON (not Standby mode), and there is no signal coming into the TV set for 15 minutes, the TV will turn off.

Tuner Mode

Pressing the key on the remote control while in Tuner mode will cause the channel number, antenna mode, and clock

to appear in the upper right corner of the screen. To remove, press again.

Video Mode

Pressing the key on the remote control while in Video Mode will cause the word Video and the clock to be displayed.

Press again to remove. Video will continue to be displayed if no video signal is present.

On Screen Display

Changing the Channel

While in Tuner mode, press the CH +/ - keys to change the channel, or use the number buttons to enter a new channel. For

channels over 99, press the 100+ button and then the last two digits of the channel.

Adjusting the Volume

To adjust the volume, press the VOL +/ - keys. Also, you may press the FUNCTION (F) key along with the VOL +/ - keys to

adjust the volume in increments of 4.

Muting the Volume

To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key.

Basic Functions

Function Selection Menus

All Function menus can be accessed by pressing the MENU key on the remote control or front panel. When finished,

press the MENU key until the screen clears.

MR53R400

FUNCTIONS & FEATURES (continued)

Tuner Menu

Access

Press the MENU key until Tuner is highlighted in red. Press the left or right

arrow key to access this menu. Use the up & down arrow keys to move between

the various settings. When finished, press the MENU key to return to the main

menu.

Note: This menu is only accessible while the TV is in Tuner mode.

Channel: This feature allows you to select the channel being displayed. Either

use the left & right arrow keys or the number buttons to select the channel.

Add/Erase: This feature is used to either add or remove the presently selected

channel from the active channel list, which is used by the TV when CH +/ - are

pushed. Use the left & right arrow keys to select Add or Erase.

Antenna: This feature sets the TV tuner to an Air antenna or a Cable antenna.

Please use Air mode when using an over-the-air antenna; use Cable mode for

a cable hookup. Use the left & right arrow keys to select between the two

options.

Auto Program: This feature will automatically add channels to your channel

list, based on the presence of a signal. If a signal is detected, that channel will be

added. If there is no signal detected then the channel will not be added. Use the

right arrow key to start the process; use the left arrow key to stop the process.

Tuner

Channel

Add/Erase

Antenna

Auto Program

➔

Add

Air

Stop Start



Access

From the Main menu screen, press the MENU key until Picture is highlighted in

red. Press the left or right arrow key to access this menu.

Features

This menu allows you to adjust the various picture settings. Use the up & down

arrow keys to move between the various settings, and the left & right arrow

keys to adjust them. When finished, press the MENU key to return to the main

menu.

TINT:-31 (more greenish) to +31 (more purplish)

BRIGHTNESS:0 (dimmest) to 63 (brightest)

CONTRAST: 0 (less contrast) to 63 (more contrast)

COLOR: 0 (less color) to 63 (more color)

Picture Menu

Picture

Tint .................00

Brightness .................32

Contrast .................32

Color .................32

Sharp .................32

➔

Inhaltsverzeichnis

Andere RCA Flachbildfernseher Handbücher

RCA

RCA L22HD31 Bedienungsanleitung

RCA

RCA L42FHD37 - LCD HDTV Bedienungsanleitung

RCA

RCA L42FHD37R - 41.9" LCD TV Kurzanleitung

RCA

RCA F27TF700 Bedienungsanleitung

RCA

RCA L37WD250 Bedienungsanleitung

RCA

RCA TruFlat 24F671T Bedienungsanleitung

RCA

RCA RLED2242A-WHITE Bedienungsanleitung

RCA

RCA TRUFLAT J32F635 Bedienungsanleitung

RCA

RCA 24F530T Bedienungsanleitung

RCA

RCA L46FHD37 Bedienungsanleitung

RCA

RCA Scenium HD50LPW162 Bedienungsanleitung

RCA

RCA TruFlat F32TF600 Bedienungsanleitung

RCA

RCA 31Series Bedienungsanleitung

RCA

RCA RLC3255A-B Bedienungsanleitung

RCA

RCA L26HD31 - 26" LCD TV Bedienungsanleitung

RCA

RCA Scenium L50000 Bedienungsanleitung

RCA

RCA 20F420T Bedienungsanleitung

RCA

RCA 24V504T Bedienungsanleitung

RCA

RCA RLED3216A Bedienungsanleitung

RCA

RCA Scenium HD52W151 Bedienungsanleitung

RCA

RCA 32F531T Bedienungsanleitung

RCA

RCA L42FHD37 - LCD HDTV Kurzanleitung

RCA

RCA L32HD31 Bedienungsanleitung

RCA

RCA RLDED3258A-C Bedienungsanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Samsung

Samsung LT-P326W Bedienungsanleitung

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Philips

Philips 42PF7321 Bedienungsanleitung

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung

JVC

JVC LT-26DX7BFN Bedienungsanleitung

Samsung

Samsung CT2Z45 Bedienungsanleitung

Philips

Philips Match Line 29PT9006/12 Bedienungsanleitung

Samsung

Samsung LNR1550X Bedienungsanleitung

Philips

Philips 37PFL5522D - annexe 2 Bedienungsanleitung

Westinghouse

Westinghouse TX-42F970Z Bedienungsanleitung

Philips

Philips 32PFL5332S Bedienungsanleitung

Philips

Philips 40PFL5705D Bedienungsanleitung

Toshiba

Toshiba 32BV500B Bedienungsanleitung

Philips

Philips MathLine 32PW9765 Bedienungsanleitung

Philips

Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung

Samsung

Samsung Smart TV UN55D6000 Leitfaden

Philips

Philips 28PW8818/12 Bedienungsanleitung

JVC

JVC GGT0362-001A-H Bedienungsanleitung