Using the earpiece
Put the earpiece body behind
your ear.
Insert the
dome in your
ear gently
and wiggle it
into the ear
canal.
Flip the on/off switch down to
turn the earpiece on.
1
2
3
5
For care and cleaning, troubleshooting, and more detailed
setup information, see the User Guide.
Make sure your ears are clean!
Wax is the #1 reason hearing products
fail. Keep your Symphonix earpiece away
from wax as much as possible.
Is this the right tube for you?
The Symphonix earpiece comes with
3 different kinds of tubes for 3 different
listening proles:
> a thin tube for the right ear
> a thin tube for the left ear
> a wide tube and dome that provides
more volume (if needed); works on
either ear
The thin tube for the right ear comes pre-
installed on the earpiece. If you would like
to use one of the other tubes, see the user
guide for instructions.
4Fold the tail into the bowl of
your ear.
6Adjust the volume level (if
necessary).
The earpiece starts at volume level 1 when
you turn it on. Press the volume button
(shown here) to select one of the three
volume levels. The number of beeps you
hear tells you which level you’re on.
